Categories

Best High pressure Oil Pipe Fittings

Automotive Smoke Machine Leak Detector, EVAP Vacuum Leakage Diagnostic Tester with Pressure Gauge & Flow Meter for All 12V Cars

  • 【EVAP SMOKE MACHINE LEAK TESTER】V3 Smoke machine automotive can easily check car sealing, throttle shafts, engine block, turbo test system, crankcase system, intake system, exhaust system, fuel tank system, EVAP system, EGR system, cooling system, various pipe fittings leakage problems. the provided mineral oil creates smoke that’s pumped it through your vehicle’s piping to help you detect the leak’s precise location..
  • 【WHY YOU NEED V3】These Situations - 1.The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke.2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall.3. Air leakage in the vacuum tube will cause the engine to run weakly..
  • 【EASY OPERATIOPN】1.Fill 10ml-20ml test johnson baby oil pink label (the most suitable oil) to the detector.2. Disconnect the intake pipe of the car. Connect the intake pipe of the car with the detector.3. Connect detector with DC12V battery, it starts to work.4.The pipe will be ....
Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

  • Economical general-purpose fitting sealant.
  • Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
  • Remains pliable at higher and lower temperatures.
  • Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.
Check Stock

Everflow Supplies PCBL3460 60\ Long Pre-Cut Black Steel Pipe with 3/4\ Nominal Size Diameter

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Rustic State Industrial Plumbing Gooseneck Connector Iron Pipe Rust Free 3/4 Inch for DIY Projects Black Set of 10

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

Charlotte Pipe 3' Cap Bushing Pipe Fitting - Socket Schedule 40 White PVC Highly Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

  • PVC SCHEDULE 40: Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • CHARLOTTE PIPE PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Joywayus Hex Nipple 1/2' Male x 1/2' Male Threaded Stainless Steel 304 Threaded Nipple Pipe Fittings for Brew Kit Home Piping (Pack of 5)

  • 【Size】1/2" Male x 1/2" Male Thread. Tapered thread. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of pipe..
  • 【High Quality Material &Threads】Made of quality stainless steel 304, durable and sturdy corrosion resistance, ductility at high temperatures, and low magnetic permeability. High quality and deep threads allow the fittings to bite better, tight threads, not easy to slip..
  • 【Hex Nipple】The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench..
  • 【Operating temperature range】Temperature rating: -65 to 250 degrees F.
  • 【Widely Applications】Male threads for connecting to female threaded pipes, this premium pipe fitting can be used to connect various pipes, such as air pipe, fuel pipe, water pipe as well as air tools.
  • it can also be used with grease, fuels, LP and natural gas, refrigeration, instrumentation and hydraulic systems in low and medium pressure pipe line connections..
Check Stock

Sunpro CP8216 StyleLine Mechanical Oil Pressure Gauge - Black Dial

  • Kit includes mechanical oil/water temperature gauge, electrical voltmeter, and mechanical oil pressure gauge.
  • 2-in black face dial with white numbers and red pointer.
  • Includes a 72-in capillary tubing with 5/8-in national pipe thread and 1/4-in, 3/8-in and 1/2-in adaptors and 72-in nylon tubing with 1/8-in and 1/4-in national pipe thread fittings.
Check Stock

CHARLOTTE PIPE 2 SCH 40 COUPLING SXS PRESSURE ( 1 Unit Piece )

  • White fittings that are used in potable water applications only.
  • For use where systems will not exceed 140° F.
  • PVC Schedule 40 Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines.
  • MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..
Check Stock

Pipe Décor 1½ in. x 6 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 6 Pack

  • PVC SCHEDULE 80: Pipe and Fittings are for pressure applications have high impact strength and are intended for systems that will not exceed 140° F..
  • MADE IN THE USA: For over a century, Ventral has been fabricating pipe and fittings, employing more than loyal, hard-working Americans. All of our products are proudly made and/or designed in the USA..
  • KEY FEATURES: They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 80 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core..
  • EASY INSTALLATION: White fittings that are used in potable water applications only. They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
  • VENTRAL PVC: Pipe and Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools and spas, outdoor applications and cold water supply lines.
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

Gsinodrs 3PCS Brass Pipe Fitting 1/2 Female NPT Thread x 1/2 Male NPT Thread Brass Hex Pipe Fittings Adaptor 1200psi High Pressure

  • 【Metal Adapter】Our pipe fitting solid brass constructed, strong and wear resistant more durable than iron and iron galvanized pipe fittings. 3PCS-....
  • 【Durable and Steady】Heavy duty brass pipe fitting construction has excellent performance in terms of corrosion resistance, high temperature....
  • 【Widely Application】Adapter for connecting pipes or fittings of different thread types, brass is corrosion resistant and can be used in wet....
  • 【Temperature Rating】Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to....
  • 【Reliable Quality】The pipe fittingadapter can widely used in your life. 24 months warranty for the adapter, any issue, please contact us..
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock