Categories

Best High quality Welding Holder

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

  • ✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
  • ✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
  • ✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
  • ✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
  • ✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.
Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

KSEIBI 331215 300 Amp Welding Electrode Holder American Design

  • This Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..
  • Large 300-Amp provides durability, up to 5/32" inch electrode capacity..
  • Lightweight and easy to operate with newly designed level for good hand clearance and better hold..
  • The high temperature / high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
  • Use KSEIBI electrode holder to connect to the welding cable and con-duct the welding current to the electrode..
Check Stock

200A Welding Electrode Holder Clamp Style Forging Brass Materials for Arc MMA Welder,Red

  • GREAT FOR most Arc, MMA, Hand Stick welding jobs.
  • ACCEPT UP TO No. 2 welding cable.The electrode holder can hold electrodes up to 5/32 Inch.
  • CONVENIENT:The electrode holder is with a comfortable insulated handle and easy to operate with..
  • MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
  • HIGH QUALITY:The electrode holder is with highly conductivity and improved cable connections..
Check Stock

YESWELDER 50 LB Welding Magnet-4 Pieces of Magnetic Welding Holder 50 LBS Holding Power Welding Accessories

  • HIGH QUALITY MAGNETS▶ Powerful Magnets Embedded in the Welding Holder Allow this Magnet to Hold up to 50 Lbs..
  • WORK WITH DIFFERENT ANGLES▶The Arrow shape design of this allows you to work with different angles while welding pieces. Can be used for 45, 90, and 135 degree angles..
  • EFFCIENTLY AND PRECISELY▶It can hold work pieces at multiple angles while leaving your hands free to work more safe and efficiently..
  • WIDE APPLICATION▶Ideal for being used as holder and positioner in welding, soldering, marking off, pipe installation..
  • PACKAGE INCLUDED▶4 Pieces 50 LB Welding Magnet..
Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

  • STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
  • SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
  • EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..
Check Stock

YESWELDER 25 LB Welding Magnet-4 Pieces of Magnetic Welding Holder 25 LBS Holding Power Welding Accessories

  • HIGH QUALITY MAGNETS▶Powerful Magnets Embedded in the Welding Holder Allow this Magnet to Hold up to 25 Lbs.
  • WORK WITH DIFFERENT ANGLES▶The Arrow shape design of this allows you to work with different angles while welding pieces. Can be used for 45, 90, and 135 degree angles..
  • EFFCIENTLY AND PRECISELY▶It can hold work pieces at multiple angles while leaving your hands free to work more safe and efficiently..
  • WIDELY APPLICATION▶Ideal for being used as holder and positioner in welding, soldering, marking off, pipe installation.
  • PACKAGE INCLUDED▶4 Pieces 25 LB Welding Magnet in this Package.
Check Stock

4Pcs 4' 50 LB Welding Magnets and Clamps Metal Working Mig Tools and Equipment Magnetic Welding Holder Clamps Workshop Welder Soldering, 45, 90, 135 Degree Angle Magnet Arc Welding Electrode Holders

  • STRONG POWER: Spurtar Angle Welding Magnet can hold and support any ferrous metal objects up to 50 lbs. These heavy-duty arrow magnets stick solidly and ensure a hand free welding while the bright red color will help you locate it more easily..
  • SAFE & SECURE: These magnetic welding holders grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
  • THREE ANGLES: Heavy-duty arrow design steel magnet supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
  • MULTIPURPOSE: These welding magnets and clamps connect parts, freeing up your hands for efficanciacy work and improve work safety, and it can also be used as a floater to separate steel plates.
  • PREMIUM WELDING TOOL: Made of high-quality stainless steel with a powder coated finish, these welders magnets are durable, long lasting, and resistant to rust and corrosion. Spurtar Magnet Holder Makes your welding job more efficiently and precisely..
Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

  • 【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
  • 【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
  • 【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
  • 【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
  • 【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.
Check Stock

ABN Arrow Welding Magnet – Metal Working Tools and Equipment, 45, 90, 135 Degree Angle Magnet, 4 Pack of 50 Lb Magnet

  • METAL HOLDER FOR WELDING AND SOLDERING: The ABN Arrow Angle Welding Magnets easily angle and hold your metal projects together before fusing the pieces together to allow hands free welding.
  • These heavy duty powerful angle magnets stick solidly to any ferrous metal object and the bright red color will help you locate it easily.
  • This 4 pack magnet set includes (4) 4 inch (10.2 cm) magnets that can hold up to 50 lbs of weight (22.7 kg).
  • GET THE PERFECT ANGLE: Magnetic angle welding tools and accessories are designed to hold metal pieces together so you can safely work with both hands.
  • Each welding angle magnet is designed with an arrow shape to allow you to work with different angles while welding, soldering, or installing metalwork.
  • Each magnetic welding holder provides 45, 90, and 135-degree angles.
  • HANDS FREE WELDING ACCESSORIES: Rather than having to use magnetic welding clamps that need to be readjusted and moved while welding, these magnetic welding holders hold your metal pieces together at a variety of angles allowing you to work through without having to pause to move them.
  • The combined weight of a 4 pack makes it easy to work with heavy pieces of metal.
  • VARIETY OF APPLICATIONS: Whether you are welding soldering, assembly, marking off, o....
Check Stock

4pcs Arrow Welding Magnets -2 pcs 4\ 50 lbs and 2 pcs 5\ 75 lbs Strength Welding Magnets and Clamps Magnetic Welding Holder Metal Working Mig Tools Workshop Welder 45,90,135,180 Degree Angle

  • STRONG POWER: 4 pieces of arrow welding magnets with 2pcs 50lb angle magnets and 2pcs 75lb angle magnets are strong power that can stick solidly to any ferrous metal object and free your hands for easy, secure, and efficient welding works.
  • SAFE & SECURE: The welding magnet and magnetic welding holders can grip the metal and hold it at the angle you need to work safely. Also, the bright red color will help you locate it easily, making your welding job more efficiently and precisely.
  • THREE ANGLES: Heavy-duty arrow design welding square magnet supports metal parts at 45°, 90°, and 135° for easy access. The center hole on the magnets allows the magnet to align itself with the tubing in a self-centering fashion helping you to more easily grab the welding magnet.
  • MULTIPURPOSE: Welding magnets connect parts, freeing up your hands for efficient work and improving work safety, and can also be used as a floater to separate steel plates or used as a double-sided holder for welding, assembly, and marking work to meet your different need.
  • BUILT TO LAST: Constructed of high-quality stainless steel with a powder-coated finish, these welding magnets are durable, long-lasting, and resistant to rust and corrosion. Ideal for being used as a holder and positioner in weld....
Check Stock

Welding Arc Welding Electrode Holders 300Amp Copper Heavy Duty Jaw Welding Rod Holder Plier Clamp of Welding Machine Materials for Arc MMA/Stick, Black

  • Great for most Arc, MMA, Hand Stick welding jobs.
  • Arc welding electrode holders with a comfortable insulated handle and easy to operate..
  • Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
  • High quality electrode holder is with highly conductivity and improved cable connections..
  • Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..
Check Stock

Arrow Welding Magnets Set Arc Tig Mig Welding Magnetic Arrow Holder Multi-angle Metal Working Tools and Equipment Welding Accessories For Soldering Welding Assembly Installation (4PCS-9LBS)

  • 【High Gloss Enamel End Plates】Constructed of high quality stainless steel with a powder coated finish,these welders are anti-rust,corrosion-resistant and long lasting!High gloss enamel end plates are solidly riveted together for the strongest performance and won’t melt while welding!The red coating not only protect from rusting and from scratching the materials that you are working with,but also help you locate it easily,make your welding job more efficiently and precisely!.
  • 【Powerful Welding Magnet】Each package comes with 4 pieces heavy duty powerful angle magnets:can hold and support any ferrous metal objects up to 9 lbs!They provide strong magnetic pull strength for extreme sturdiness that is needed for welding,soldering,can be stuck solidly to any metal object while leaving your hands free to work more efficiently!Perfect gift for square and round tube welders,iron workers,professional welders,metal fabricators,art welders!.
  • 【Most Popular Uses of Angle Degree】Each magnetic welding holder is designed with an arrow shape which allows the magnet to align itself with the tubing in a self-centering fashion,and provides the most popular uses of angle degree:45,90,and 135-degree,allows you to work with different angles while welding,solderin....
Check Stock