Categories

Best High speed Isolators

MuHize Black D-Ring Shackle Cover 2 Pcs Shackle Isolator and 4 Pcs Washer, Isolators Washers Kit Fits 3/4 inch Shackle Gear Design Rattling Protection (Pack of 2)

  • PACKAGE INCLUDED - MuHize 2Pcs black D-ring shackle isolators + 4 Pcs black washers kit. Perfect fit for standard 0.75" or 3/4" D-Rings or Shackles with 7/8" screw pin..
  • EASIEST DIY FOR BUMPER - The shackle isolators and washers are one of the DIY necessities of the off-road trail or everyday driving. The quality shackle isolators can both protect Wrangler or pickup bumper finishes from damage and make it look cool after DIY modification..
  • EASY TO INSTALL - No Screws or drilling are required. And the washers can reduce rattling noise when the vehicle is in motion..
  • DURABLE MATERIAL - MuHize isolator & washers are specific for durable rubber material, which can prevent shackles from crack, warp or corrode effectively..
  • HIGH QUALITY - Perfect bending can be matched with 3/4 inch D-ring shackle. Accurate design. It can be used as a buffer to effectively protect the bumper..
Check Stock

The Crush Tour - Live [DVD]

  • Powerful: 212cc engine is larger than most in its class, producing 4, 496lbs of force at 5, 400 blows per minute.
  • Maneuverable with our unique swing-over handle and the compact 24 x 17-3/4" Contoured edge plate.
  • single direction plate travels up to 82 feet per minute.
  • Vibration isolators between the welded Steel plate and the engine reduce vibration extending the engine's life.
  • Easily transportable with lift handles at the plate, as well as central lifting/load Bar.
Check Stock

Beautifully Toxic (Candied Crush Book 1)

  • Powerful: 212cc engine is larger than most in its class, producing 4, 496lbs of force at 5, 400 blows per minute.
  • Maneuverable with our unique swing-over handle and the compact 24 x 17-3/4" Contoured edge plate.
  • single direction plate travels up to 82 feet per minute.
  • Vibration isolators between the welded Steel plate and the engine reduce vibration extending the engine's life.
  • Easily transportable with lift handles at the plate, as well as central lifting/load Bar.
Check Stock

Restaurant Canopy Hood Grease Rated Exhaust Fan- High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control- 24 3/4" Base, 0.75 HP 115 Volt Single Phase Motor, 1500-2200 CFM (DU85HFA)

  • High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control, disconnect switch and 15-3/4" wheel..
  • 24 3/4" x 24 3/4" Fan Base Dimension/ 103 LBs/ 1500-2200 CFM/ 0.75 HP 115 volt Single Phase Motor..
  • Rated for restaurant grease and general ventilation applications. UL705, UL762, & ULC-S645 Rated. Included with the exhaust fan is a restaurant duty grease cup, down spout, and a hinge kit for exhaust fan roof curbs..
  • Construction features include a heavy gauge aluminum housing, a backward inclined, non-overloading wheel, a safety disconnect switch, a variable speed control, vibration isolators, and quick release latches for motor compartment access..
  • As all fans are custom built, no returns or exchanges are accepted..
Check Stock

Restaurant Canopy Hood Grease Rated Exhaust Fan- High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control- 19" Fan Base, 0.180 HP 115 Volt Single Phase Motor, 100-500 CFM (DU12HFA)

  • High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control, disconnect switch and 10-1/2" wheel..
  • 19" x 19" Fan Base Dimension/ 62 LBs/ 100-500 CFM/ 0.180 HP 115 volt Single Phase Motor..
  • Rated for restaurant grease and general ventilation applications. UL705, UL762, & ULC-S645. Included with the exhaust fan is a restaurant duty grease cup, down spout, and a hinge kit for exhaust fan roof curbs..
  • Construction features include a heavy gauge aluminum housing, a backward inclined, non-overloading wheel, a safety disconnect switch, a variable speed control, vibration isolators, and quick release latches for motor compartment access..
  • As all fans are custom built, no returns or exchanges are accepted..
Check Stock

ButtKicker BK-CMAK Couch/Chair Mounting Accessory Kit

  • Easy-to-use kit simplifies installation of your ButtKicker LFE.
  • Allows ButtKicker LFE to be placed simply and securely on whatever furniture you are going to be using.
  • Attaches directly to the leg of your couch or chair, while sitting on rubber isolators.
  • Includes five additional rubber isolators, drastically improving the performance of your ButtKicker LFE.
  • Kit comes with all the necessary mounting hardware, and a handy wrench.
Check Stock

WEN 56035T 7 HP 4500-Pound Compaction Force Plate Compactor CARB Compliant Black

  • Powerful: 212cc engine is larger than most in its class, producing 4, 496lbs of force at 5, 400 blows per minute.
  • Maneuverable with our unique swing-over handle and the compact 24 x 17-3/4" Contoured edge plate.
  • single direction plate travels up to 82 feet per minute.
  • Vibration isolators between the welded Steel plate and the engine reduce vibration extending the engine's life.
  • Easily transportable with lift handles at the plate, as well as central lifting/load Bar.
Check Stock

MAOPINER 4Pack Ceiling Vibration Damping Mounts, Spring Vibration Isolator for Soundproof and Shockproof for A/C Air Handler Bedroom Theater Studio, 110 Lb Capacity, 1.20\ Deflection

  • Premium Material: The red part of the ceiling vibration damping mounts is made of silicon instead of rubber, better functioning in absorbing vibration. And also the silicon applied is qualified, safe and environmentally friendly material..
  • Specification: 100mm*45mm*50mm or 4''*1.8''*2''.
  • Weight: 0.4kg. Material: steel & rubber. Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 24 inch, e.g. 63~99 isolators are needed for a room aera of 215~322 sq ft.
  • Easy To Install: The base of the mechanical vibration damping pads has 1 bolt hole on base for rigid mounting when used for supporting machinery, easy installation on ceilings, floors, walls, ducts, etc..
  • Wide Application: : The shock absorber can be used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room etc. Can be mounted to ceilings, walls, pumps..
  • Package Included: 4 x 110 Lb capacity spring vibration isolators.
Check Stock

Wztepeng 500A 12V Mobile Audio Relay Battery Isolator 500Amp 12Volt Relay

  • Battery Isolator:Battery isolators are suitable for applications that need to isolate multiple batteries, such as mobile audio, marine, powered sports, etc. It is used to isolate batteries that power AV, navigation, etc. It allows the second battery to be fully dedicated to the sound system and does not create a voltage drop like common isolators tend to do. The isolator will draw less than 1 amp when your vehicle is powered on..
  • Extends battery life:its a must for daily driver systems,This 500 amp continuous duty relay does not have the voltage drop that a solid state battery isolator has and does a much better job of charging auxiliary batteries through..
  • Feature:Made of high-quality materials, excellent performance and durable.Easy to install and start up immediately..
  • Package Include:1 * 500 Amp 12V Mobile Audio Relay Battery Isolator.
  • Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly. We offer Half a year warranty, 100% satisfaction guarantee..
Check Stock

Studio Monitor Isolation Pads - Suitable for 6.5'- 8' inch Speakers - Large Speaker Isolation Pads Fit Most Desktops - High-Density Acoustic isolation Foam - Angled Speaker Foam Stand - 2 Speaker Pads

  • Speaker isolation pads size 10.4 x 13 x 1.6 Inches (W x D x H). Speaker foam is designed to fit with the most popular 6.5″ – 8″ Large monitors.
  • Speaker platform high-density acoustic isolation foam for professional use (50kg/m^3 density)..
  • Angled speaker stand two-component design, monitor isolators allow 5 different angle configurations..
  • Speaker stand desk generates cleaner, more precise sound by reducing vibrations and low-end distortion..
  • Subwoofer sound isolation pads keep your studio’s desktop clean look with no logo on the front of the monitor isolators.
Check Stock

TPI Corporation CF20 Commercial Floor Fan, 20 inch Air Circulator - 120V, 1/5HP Non-Oscillating Motor, 3-Speed, UL & C-UL Listed

  • ...aditional indoor applications. This 120-Volt, 3-speed, non-oscillating air circulating unit is sturdy, dependable, and an ideal unit for all types of personal work and play spaces..
  • Design: Corrosion resistant steel fan head structure offered in a black finish, includes steel frame, protective rubber floor vibration isolators, adjustable tilt angle and features a 20-inch diameter 3-aluminum paddle blades attached to a steel hub and spider assembly for high velocity performance. The 3-speed motor comes with 1/5 horsepower, permanently lubricated, sleeve bearing, open ventilated motor with permanent split capacitor generating 1.9-amps at 120V, single phase electrical service.
  • Durable Circulation Fan: This 20 inch compact fan delivers high air flow and provides easy DIY solutions. This light-weight fan is shipped fully-assembled and ready for plug and play operation. The hassle-free electric fan can be operated in a gym, office, basement, restaurant, workshop, protected patio area, bedroom, classroom or garage..
  • Air Circulating Appliance: Maintains steady air flow and quietly eradicates suffocation in enclosed spaces easily. All metal construction tilts 180-degs allowing for directional airflow control to meet your cooling needs..
Check Stock

Mono-gatari 4Pcs Spring Vibration Isolator Ceiling Vibration Damping Mounts Anti Vibration Ceiling Suspended Mounted with Removable Frame for A/C Air Handler Bedroom Theater Studio 110 Lb Capacity

  • 【Damping Structure】The red part is made of unique damping silica, better functioning in absorbing vibration, especially for places with subwoofers in entertainment venues..
  • 【High Quality】Vibration damping mounts is composed of 3mm thick steel spring, damping silicone layer, outer frame. Silicon applied is environmentally friendly material..
  • 【Specification】Max load: 50kg (110lbs).
  • The recommended distance of each two isolators is 23.6 inch. E.g. 63~99 isolators are needed for a room aera of 215~322 sq ft..
  • 【Easy Installation】Anti vibration isolator spring is designed with a 5/16 inch (M8) pre-drilled bolt hole, easy installation on ceilings, floors, walls, ducts, HAVC, etc..
  • 【Wide Application】Anti vibration ceiling suspended mounted is widely used in bedroom, studios, home theaters, houses, hotels, bars, karaoke room, TV stations, concert halls, etc..
Check Stock

GearAmerica UBER Shackle Isolators – Only for GA UBER Shackles Will Not Fit a 3/4 D Ring – Helps Prevent Corrosion and Protect Finish – Reduces Noise and Rattling – 2 Pack

  • Keep Your Equipment Safe: Protects your vehicle and your Mega Shackles from scrapes, dings and scuffs and prevents corrosion.
  • Silence Rattle Noise: Our isolators work wonders to eliminate rattle noise while keeping your bumper safe.
  • Exclusively Fits GearAmerica Mega Shackles : These isolators are the perfect functional complement to our bold, virtually unbreakable GearAmerica Mega....
  • Purchase with Confidence: All GearAmerica products include our industry-leading Hassle-Free Lifetime Replacement Warranty.
  • If You Love the Open Road, Join Us: Our mission is to advocate and live a lifestyle of freedom, with respect for nature & machinery, that’s why....
Check Stock