Categories

Best High temperature Enclosure Seals

Rockville RG212CA Dual 12 inches Slim Vented Powered Car Subwoofer Enclosure 2000 Watt

  • ...Watts RMS, 12“ Super-Slim Subwoofer, Ultra-Stiff Composite Pulp Cone with Kevlar Reinforcement, 3D Molded Acrylic Dust Cap, Expanded & Rolled Steal Basket.
  • High Density Laminated Rubber Surround, High Power Strontium Magnet with Ultra Saturated High BL Motor Structure, Vented Core Magnet Motor Structure, 2” High Temperature Aluminum Voice Coil, 8 mm Washer & Yoke Plates, 13.6 mm Peak-to-Peak X-Max, 40 oz. Magnet, Slim Vented MDF Enclosure Design, Impedance: 4-ohms, Frequency response: 30Hz-500Hz, SPL @ 1w/1m: 89dB, Dimensions: 29.52" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth, Unit Weight: 40.12 Lbs.
  • Amp Features: Built-in 500 Watts RMS / 2000 Watt Mono Block Amplifier, 2 Ohm stable amplifier, Class D amplifier, Extruded aluminum heatsink stays cool even at high volumes, 200mV – 5V Variable Input Level.
  • 12dB Low Pass Crossover Frequency 50Hz-200Hz, Low Level RCA Inputs, Remote level attenuation: 0 to -32.2 dB, 3.7 second turn on delay, High Level Speaker Level Input with Auto Start Music Sense, RJ11 Jack for Dash Mounted Bass Remote.
Check Stock

SCULPFUN Laser Engraver Enclosure with Vent, Fireproof Laser Cutter Protective Cover, Smoke & Odor Insulation, Noise Reduction, Eye Protection, Suitable for Most Laser Engraving Machine, 700x700x460mm

  • 【High Strength Fireproof Material】The laser engraver enclosure is made of high-quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures. Please watch the video, we tested with fire for a few minutes without any problem..
  • 【Large Size & Wide Applicability】Extra large space for laser engraving machine protection cover (700*700*460mm/27.5*27.5*18in). Higher than other laser enclosure, can be used for laser rotary roller engraving taller objects. Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range..
  • 【Eyes Protection & Slanted Viewing Design】Laser cutter enclosure viewing window size 53x60mm (20.8*23.6inch), made of double-layer dark PVC material, which can reduce the blue light produced by laser engraving and protect your eyes. The beveled design of the laser enclosure allows you to better observe the machine operation, giving you a good laser engraving experience..
  • 【Noise Reduction, Smoke & Odor Insulation】The laser enclosure isolates 99% of dust particles, smoke, odors, and noise during the cutting and engraving process. Ensuring your safe and healthy laser ....
Check Stock

SainSmart Large 3D Printer Enclosure, 20.9'' x 24.2\ x 28.9\

  • Consistent Temperature: The SainSmart 3D Printer Enclosure reduces heat losses and prevents external factors that might alter your prints, keeping the printing area at a consistent temperature, delivering stable and smooth printing results..
  • Noise & Dust Reduction: A enclosure helps to reduce the annoying fan noise while printing, making it more viable for home and school use. It also protects your printers from dust..
  • Safe to Use: The lining of enclosure uses pure aluminum film material, equipped with stainless steel supports, stable structure and a large space. Folding storage, easy to install and carry..
  • Better organize your printing area: the enclosure is equipped with multiple tool pockets and holders on each side, keeping your printing area clean and tidy..
  • With a large area measuring 73.5cm x 61.5cm x 53cm (20.9'' x 24.2" x 28.9"), this enclosure is compatible with Ender-3, Ender-3 Pro, Ender-3 V2, Ender-3 V2 Neo, Ender-3 S1 Pro, Ender-3 Max, Ender-3 Max Neo, Ender-5 Pro, CR-6 SE, CR-10, CR-10 Smart Pro..
Check Stock

33Feet Long Universal Self Adhesive Auto Rubber Weather Draft Seal Strip 51/100 Inch Wide X 1/5 Inch Thick,Weatherstrip for Car Window and Door,Engine Cover (2 Rolls of 16.5 Ft Long)

  • ⭐⭐ --Important: Extreme temperatures will result in poor adhesive performance. Apply this seal only if the air and surface temperature is between 55°- 104°F(13° - 40°C). If 45°-54°F(7° - 12°C) you can use a hair dryer and warm the tape and surface of pickup 6in (15cm)section at a time, then apply.If you find that the adhesive of the weatherstripping is not sticky enough, you can apply the adhesive tape attached in the package for a better result..
  • ⭐ -- One roll specification:13mm (51/100 In)width x 5mm(1/5 In)height,length 5m(16.5Ft),total of 2rolls length 10m(33Ft)..
  • ⭐ --An upgraded universal car truck sealer weather striping used to replace other Type D, P, Z and O stripe. Easy to install and high strength adhesive weatherseal.Easy-installed tool.Direct replacement tape, you just need to push the stripping foam on the rubber sealant above the installed place..
  • ⭐ -- Wide Range of Application: This rubber trim seal for a variety of applications including automotive door seals, RV compartment seals, boat hatch seals, door seals, storage container seals, tool box seals and decorative trim seals..
  • ⭐ --High Quality weatherstripping. It will Seal the gap between car door, car body, car hood, bed rail etc. Enhance driving comfort while crui....
Check Stock

KICKER 43CVR152 COMPVR 15" 1000 Watt Car Subwoofer+Sealed Sub Box Enclosure

  • ...r Audio Subwoofer. Power Handling: Peak :1000 watts. RMS :500 watts. Size :15". Injection molded SoloKon cone. Ribbed Santoprene Surround.
  • Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 8-3/16". Mounting Diameter : 13-11/16". Sensitivity : 89.2dB @ 1w/1m. Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 1.8 cu. ft. Maximum Sealed Enclosure : 5.2 cu. ft. Minimum Ported Enclosure : 3 cu. ft. Maximum Ported Enclosure : 5 cu. ft.
  • Subwoofer Design : Round / Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Woofer Surround : Santoprene Rubber. Weather resistant - Suitable for marine use in additional to car applications. We can ship Kicker products to the 48 continental United States. Features: RockvilIe RGS15 Single 15" Sealed Subwoofer Enclosure. Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!. 3/4" USA Heavy Duty MDF Construction.
  • Machine precision cut mounting holes. Top of the line Glue for extra durable adhesion. High quality GOLD spring loaded terminals. Designed, tested, and engineered t....
Check Stock

MYFAMIREA 24.5Ft Adhesive Tailgate Seal fits Pickups Truck Auto Car Keep Kit Dust Dirt and Moisture Out of Covered Truck Bed

  • ★★One roll specification: The rubber trim seal is made of premium tape(24.5FT). Truck bed seal, more durable and flexible. Noise Reduction, Waterproof, Dustproof & Soundproof & Windproof. High temperature resistance & cold resistance..
  • ★★ An upgraded universal tundra tailgate seal weather striping used to replace other Type D, P, Z and O stripe. Easy to install and high strength adhesive weatherseal..
  • ★★ This Tailgate seal enhances the leakproofness of your car, which make door close more tightly .Reduce the noise of wind when you drive your car at high speed. Have a nice trip with your family.Make your car more sealed so that you could keep your car away from dust, raindrop and Fog. Soundproofing insulation best waterproof dealer..
  • ★★ Widely Application. This rubber trim seal suitable for most kinds of pickups, trucks, auto car etc. Including automotive door seals, RV compartment seals, door seals, storage container seals, tool box seals and decorative trim seals..
  • ★★ Easy-installed tool.Direct replacement tape, you just need to push the stripping foam on the rubber sealant above the installed place..
Check Stock

EEEKit 5M/16FT Auto Seal Weather Stripping Rubber Sealing Strip Trim Cover for Car Front Rear Windshield

  • 【Wide Range of Used】This rubber trim seal for a variety of applications including automotive door seals, RV compartment seals, boat hatch seals, door seals, storage container seals, tool box seals and decorative trim seals..
  • 【Flexible Rubber Trim】U Shape Trim contains internal metal clips to grip permanent around the install place and excellent grip retention, and sponge rubber bulb to provide a secure seal for a variety of applications..
  • 【Weather-Resistant】This rubber bulb seal provides excellent protection against heat, extreme weather damage, and corrosion. High temperature resistance & cold resistance, prevent ultraviolet light..
  • 【Safe And Durable】Durable EPDM foam rubber drowns out noise, eliminates vibration, and protects your vehicle, RV, boat, or home from outside elements. And effectively play a role in Noise Reduction, Waterproof, Dustproof & Soundproof & Windproof..
  • 【Easy to Install】Not need to adhesive. Push-on trim seal allows for a fast installation and creates a finished edge seal that is durable and protects against the elements..
Check Stock

JORESTECH Continuous Plastic Bag Band Sealing Date Sealer Printer Machine (Stainless Steel, E-CBS-800I))

  • Dual-orientation system includes vertical AND horizontal conversion kits (Seals bags that are laying on their side or bags that are standing).
  • All-in-one continuous high-speed bag sealing system makes strong, professional-looking airtight seals. Easy to use, equipped with bag entry guide for easy bag feeding and straight seals. Includes motorized belt conveyor with synchronized speed adjustment (Maximum speed 12 m/min [40 ft./min])..
  • Integrated hot-roll printing coder for printing numbers and letters directly onto the bag’s seal, equipped with photo sensor and adjustable print placement system for optimal printing precision. Accepts a variety of print colors to increase contrast and readability, prints alphanumeric characters (max 20 per line – including spaces). Maximum lines of print: Two..
  • Adjustable 2-way pulley system for optimal bag stability and coding clarity.
  • Sealing method: constant heat. Seals thermoplastic materials including Polyethylene (PE), Polypropylene (PP), BoPET (i.e. Mylar), and heat-sealable laminations and cellulose (ie. Cellophane). Single pair of bronze sealing bars, and PID Digital Temperature Controller: 0 - 300°C (572°F) with dual alphanumeric displays (target & current temperature) for optimal seal..
Check Stock

Rockville VS12K54 12" K5 1400w Car Subwoofer in Vented Sub Enclosure Box - 4 Ohm,Black

  • ...oaded push terminals. Impedance: Single 4-Ohm Voice Coils. Vented Hole on T-yoke Enhances Heat Dissipation.
  • Mounting Gasket with Rockville branding makes it easy to mount the subwoofer air-tight. High BL Magnetic Motor Gap. High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power. Cutout Diameter: 11.02 inches. Mounting Depth: 5.03 inches. Frequency Response: 25 Hz - 1.5K kHz. 6mm T-Yoke + 6mm Washer. Sensitivity: 88dB. Weight: 10.1 Lbs.. Loaded enclosure weight: 37.4 Lbs.. Loaded enclosure dimensions (inches): 18.25 x 14.25 x 16.25.
  • Body: Non-Pressed Paper. Gap Plate Inside Diameter: 80mm (3.14 inches). Gap Plate Outside Diameter: 156mm (6.14 inches). Gap Plate Thickness: 25mm (0.98 inches). Yoke Outside Diameter: 145mm (5.7 inches). Yoke Thickness: 6mm (0.23 inches). Yoke Pole Diameter: 50mm (2 inches). Electrical voice coil resistance at DC: Re 3.31 Ohm. requency independent part of voice coil inductance: Le 0.944 mH. Para-inductance of voice coil: L2 1.468 mH. Electrical resistance due to eddy current losses: R2 14.7 Ohm.
Check Stock

KICKER 43CVR104 10” CompVR Sub, 43CSC654 6.5” CS-Series Speakers (2 Pair), 43CXA6001 CX-Series Amp, Remote and Wire kit

  • ...ling: Peak :700 watts. RMS : 350watts. Recommended power range : 200 - 350 RMS. Injection molded SoloKon cone. Ribbed Santoprene Surround.
  • Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 5-1/2". Mounting Diameter : 9-3/16". Sensitivity : 83.6dB @ 1w/1m. Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 0.8 cu. ft. Maximum Sealed Enclosure : 3 cu. ft..
  • Minimum Ported Enclosure: 1.25 cu. ft. Maximum Ported Enclosure: 1.75 cu. ft. Subwoofer Design : Round/Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Weather resistant - Suitable for marine use in additional to car applications..
Check Stock

EAI 35mm x 47mm x 7mm FPM/FKM TC Double Lip w/Stainless Steel Spring Oil Seal. Comp. /w Viton Shaft Seal

  • SUPERIOR QUALITY and DURABILITY: EAI FPM/FKM Oil Seals are engineered with high quality stainless steel spring and high strength FPM/FKM Rubber for reliable and long-lasting performance. This 35mm ID seal is easy to use, practical, and versatile and is a great solution to stop lubricant leakage..
  • SUPERIOR QUALITY and DURABILITY: EAI Viton oil seals are engineered with Stainless Steel Spring and high strength Fluoropolymer Elastomer + Synthetic Rubber for reliable and long-lasting performance. This 35mmx47mmx7mm rubber cover seal is lightweight and not easy to age..
  • GREAT FIT: 35x47x7mm size. This metric TC style seal is widely used in any application involving oil, fuel, mineral acid. Our oil seal will fit perfectly everywhere you need it..
  • LIQUID RESISTANT: This Double Lip oil seal is resistantce to UV exposure, ozone, oxidation, weather, mold, fungus and chemicals..
  • HIGH-TEMPERATURE RESISTANCE: Due to its Fluoropolymer Elastomer+Synthetic Rubber material, it will upstand temperatures from -26oC to 230oC. Also, our Oil Seals has high tensile strength..
Check Stock

Sundown Audio E-15 v4 D2 15 500W RMS Dual 2-Ohm Subwoofer

  • Specifications: DC Resistance (Re): 7.75 Ω | Resonance Frequency (Fs): 36.95 Hz | Equivalent Volume (Vas): 52.35 L | Electrical Q Factor (Qes): 0.85....
  • Box Recommendations: Sealed Enclosure Suggestion: 2.5 cu. ft. | Ported Enclosure Suggestion: 3 - 4 cu. ft. @ 35 Hz | Displacement: 0.17 cu. ft. |....
  • Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation | 4‐layer copper high temperature voice coil windings....
  • Custom tooled frame spacer / ventilation ring | High efficiency air‐flow management integrated into the motor for maximum voice coil cooling | Dual....
Check Stock

M.2 NVME NGFF SSD Enclosure Tool-Free, USB C 3.1 Gen 2 10 Gbps M.2 SATA PCIe Enclosure Adapter Support M-Key B+M-Key, External Solid State Drive Support UASP Trim for SSD Size 2230/2242/2260/228

  • ...ad arc design makes the hard drive adapter structure stronger. The product’s blue indicator LEDs are intuitive. The mini M.2 case is smaller and lighter than your phone, making it the perfect choice for business travel and efficient work on-the-go..
  • 【Safety and Stability】An aluminum alloy shell and ABS+PC high temperature resistant materials give the M.2 SSD enclosure excellent heat dissipation performance, which provides your SSD with great all-around protection. After 72 hours of continuous testing, the enclosure only reached temperatures close to human body temperature, making this product more stable and safer to use..
  • 【What You Get】1x Hard disk enclosure (4.69in * 1.57in * 0.55in), 2x USB cable (USB-A to USB-C, USB-C to USB-C), 1x User manual. If there is a problem during use, please feel free to contact us first, we provide professional technicians to answer your questions， and provide lifetime maintenance and return services..
Check Stock