Categories

Best High temperature Flow Meter

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

Protmex Anemometer, Digital Handheld Anemometer with USB Interface, Portable Temperature Humidity Wind Speed Meter with LCD Backlight, Air Volume Flow CFM Meter, PT6252B (Battery Included)

  • ...YNC ON COMPUTER】The Protmex air flow meter cfm comes with a USB cable and PC software support can connect the wind meter to the computer via a USB port. For wind data logging, analyzing, and monitoring..
  • 【MULTI-FUNCTIONAL ANEMOMETER】The digital handheld anemometer can monitor and record wind speed, air volume, temperature, humidity, dew point temperature, wet bulb temperature, CFM airflow, and RH, perfect for balancing airflow in HVAC tasks such as duct vents, AC air output testing..
  • 【SWITCHABLE READING】The Protmex wind gauge has the functions of reading holding, maximum value, minimum value, etc. With a large-screen LCD and backlight, the multi-unit switching function..
  • 【ACCURATE AIR VELOCITY METER】Our Protmex wind speed meter for measuring wind speed range 0.5~30 m/s(+/- 2% of readings).
  • Wind temperature -20~60℃, -4℉-140℉(+/-0.2℃,32.56℉).
  • 2 temp sensors and 8 vanes make the meter is very sensitive to measure very low air flows to help you with HVAC installation, CFM calculation, Duct vents..
  • 【GUARANTEED SERVICE】We guarantee that we will reply to your questions, comments, and requests as soon as possible. If you are not satisfied with the products, please feel free to contact us, and we wi....
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

  • ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
  • ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
  • ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
  • ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
  • ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check Stock

BTMETER BT-846A Pro HVAC Anemometer Measures Wind Speed Wind Flow Wind Temperature CFM Air Flow Velocity Meter with Backlight MAX MIN AVG

  • ➤【Pro Air Flow CFM Anemometer 】Accurately measures wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. wind temp in ℃/℉ , air flow in....
  • ➤【Higher Range Wind Speed Meter 】Higher Wind Speed Range: 0.001~100 mph (Accuracy: +/- 3% +/- 0.2 reading), Resolution: 0.001. Air temperature....
  • ➤【Airflow CFM Meter】BT-846A wind speed gauge measures Wind flow range: CFM 0-999900 ft3/min, Resolution: 0.001-100, Air flow area : 0.001-9999....
  • ➤【Separated Extendable Wind Sensor】Built with user-friendly extendable wind sensor vane, so you can still look at the readings easily while you....
  • ➤【Must Have for Air Balancing】 Designed for HVAC trouble-shooting, air flow balancing. The separated wind speed sensor can be replaced if it’s....
Check Stock

BTMETER Digital Anemometer Barometer Handheld, for Wind Speed Temperature Wind Chill Tester w/Humidity, Altitude, Barometric Pressure Meter for Climbing Drone HVAC CFM BT-100WM

  • ... Point, Barometric Pressure and Altitude. With data log, Tripod hole for mounting, it’s ideal for outdoor activities:Long Range shooting, Hunting, Sailing, Kite flying, Drone Driving, CFM air flow test..
  • ➤【HIGH PRECISION】Digital wind meter for measure wind speed range 0.67 ~ 67.1 mph( +/- 5% accuracy).
  • Wind temperature range -10~45℃,14℉-113℉(+/-2 ℃/℉).
  • Wind meter measurement altitude from 0-19685 Ft. Resolution: 0.2 mph, 0.2℉,0.1% RH. So you can be rest assured to get fast and accurate reading..
  • ➤【EASY TO USE】Measures different readings such as Max, Min, Average, Current Wind Speed, display in 5 units: mph, ft/min, km/h, m/s or knots. Temperature (Celsius/Fahrenheit), Elevation(M, Ft), Atmospheric pressure(inHg, hpa mbar). And LCD backlit screen makes it easy to read in day or at night..
  • ➤【LOG THE BAROMETER DATA】This handheld wind speed meter can also log 16 groups of barometric pressure data for record, compare and analyse the relationship between temperature, humidity, and height. It’s compact pocket sized Pro anemometer for weather station, long distance shooting, HVAC testing.
  • ➤【SAVE YOUR BATTERY】Auto shutdown after 10 mins without operation, low battery indicator to remind you change the battery. 1 year warran....
Check Stock

Testo 550i Kit I App Operated Digital Manifold and 2 x 115i Pipe Clamp Thermometer for air Conditioning, Refrigeration Systems and Heat Pumps – with Bluetooth

  • Dependable: The testo 550i with its rugged housing (IP54) block was specifically created for harsh environments, offering the reliability needed by HVACR technicians.
  • User-friendly: With its compact design, 2-way valve block and automated probe connection, the HVAC meter provides convenient handling in difficult to access environments.
  • Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send results directly from the job site.
  • Efficient: The app-controlled air conditioning meter accurately determines high and low pressure as well as evaporation and condensation temperature.
  • Includes 115i: With a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes.
Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

  • Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
  • Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
  • Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
  • Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
  • Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check Stock

YFIXTOOL 1\ Digital Turbine Flow Meter, LCD Digital Display Flowmeter, Gas Oil Fuel Flowmeter for Diesel, Kerosene, Gasoline, Aluminum Stainless Steel. Flow Rate of 10-100LPM(2.6-26GPM).

  • 【Wide Application】The digital turbine fuel flow meter can be used to measure diesel, gasoline, kerosene, methanol and so on. Suitable for the flow rate of 10-100LPM(2.6-26GPM)..
  • 【Multifunctional】Zero function, instantaneous flow, and cumulative flow readings on the display with the arccuracy of ±1%..
  • 【Convenient Use】The turbine flow meter can switch between liters, gallons, pints and quarts to meet your different needs..
  • 【High-Quality Materials】The flow meter is made of corrosion-resistant aluminum housing and stainless steel turbine, and have superior sturdiness and durability..
  • 【Warn】With 2 x LR03 AAA batteries, the circuit is stable, long-service life and high efficiency. Do not forget to remove the battery when out of use because it is long-working and can't be turned off..
Check Stock

BTMETER BT-100 Handheld Anemometer Digital Wind Speed CFM Meter Gauge Air Flow Velocity Tester for HVAC Shooting Drone Wind Chill 14℉-113℉ Wind Temperature

  • 【Multifunction Pro Anemometer】Wind Speed, Wind Temperature, Wind Chill, Low battery indicator on bright backlit LCD screen. BT-100 is a portable wind speed guages can accurately measure air speed in 5 units: m/s, km/h, ft/min, knots, mph. Wind Temp in ℃/℉(Degree Celsius/Fahrenheit).
  • 【Accurate Wind Meter】Wind Speed Meter for measuring wind speed range 0.67~67.1 mph(+/- 2% of readings), Wind temperature -10~60℃,14℉-113℉(+/-2℃,35.6℉).
  • 0.2℃. 2 temp sensors and 8 vanes makes this air velocity meter is sensitive to measure very low air flow in HVAC installation, duct vent. A good helper in CFM calculation..
Check Stock

Dura Products DPABS-4315E Dura-ABS – 110V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EDPM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

Dura Products DPABS-4312E Dura-ABS – 12V Auto Batch System w/Dura-Meter w/Lexan Faceplate, Dura-Pump w/EPDM Rubber

  • AUTO BATCH SYSTEM: This is an intuitive interface that allows for the selection of manual or automatic operation with the flip of a switch. This is a high-flow pumping system with up to 15GPM flow rate..
  • HOW IT WORKS: The Auto-Batch System is easy to use. All you need to do is select the volume desired, press START. The pump will begin to dispense fluid and automatically shuts off when complete..
  • KIT INCLUDES: The Dura-ABS kit includes high-flow Dura-Pump and Dura-Meter with Lexan faceplate. It is available in preset, quick list or manual calibration..
  • DURA METER: The fluid flow meter has 100% moisture sealed circuitry that makes meter impervious to water intrusion. It is also equipped with menu driven backlit display to check the fuel level. It can be plumbed both for in-line and 90o applications..
  • DURA PUMP: The hydraulic pump has a 30-minute duty cycle and automatically shuts off after 10 minutes. The included ¼ HP motor is thermally protected from overheating which makes it suitable for elaborated use..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock