Categories

Best High temperature Primers

Sealproof 1.5

  • . Successfully tested for toxicity by an independent laboratory for use in Aquaculture.Above and below ground installations.
  • For use with PVC Schedule 40 type fittings.
  • Use with Listed PVC solvent cements and primers.
  • Manufactured in the United States from high quality virgin PVC compound.
  • Less fittings required compared with PVC pipe.
  • Flexible PVC wall and cover for easy handling and installation.
  • FDA non-toxic formulation in compliance with IAPMO TSC 31-90.
  • Rigid PVC spiral resists crushing and impact.
  • Flexible for easy handling and installation.
  • All psi and va. rating are based on an open ended system at ambient temperatures.
Check Stock

Roberlo Multyfiller Express Light Grey Primer Acrylic Filler for Car Repair, Fast Drying, High Solids, 1 Gallon and Universal Hardener Activator P5000, 1 Quart

  • Fast Curing even in low temperatures or high humidity environments. 2K High Solid Urethane Primer 4:1 mixing ratio.
  • Very fast drying times ideal for partial repairs or air drying.
  • Can be used as high build, medium build. Easy to sand in both dry and wet sanding.
  • Fast curing, even in low temperatures or high humidity environments.
  • Great adhesion and insulating power to putties, other primers, and properly sanded hardened paints.
Check Stock

Clear Aquarium Silicone Sealant - 10.2 Fluid oz Cartridge

  • Container size: 10.2 Oz. This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers.
  • The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
  • ASI Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging.
  • Can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -57°C to +233°C (-70° F to 450°F).
  • Formulated for use with fresh and salt-water aquariums or a Vivarium.
Check Stock

Black Aquarium Silicone Sealant - 10.2 Fluid oz Cartridge

  • Container size: 10.2 Oz. This high modulus component RTV Silicone Sealant forms strong cohesive bonds to glass without the need of primers.
  • The bonds are unaffected by continuous immersion in water and, when fully cured, is non-toxic to fish.
  • ASI Aquarium Silicone Sealant is a non-slump sealant and can be applied to vertical surfaces without flowing or sagging.
  • Can be applied to surface temperatures from -18°C to +50°C (0°F to +120°F) and after curing, withstands constant operating temperatures from -57°C to +233°C (-70° F to 450°F).
  • Formulated for use with fresh and salt-water aquariums or a Vivarium.
Check Stock

Frankford Arsenal Platinum Series Perfect Seat Hand Primer Seating Tool with Case for Reloading , Black

  • SPECS: Comes with 12 shell holders to cover the most popular cases and the self-righting primer tray holds 100 plus primers.
  • VERSATILITY: Works with both small and large primers and the case includes 3 extra posts so you can store custom or rare collets in the same place.
  • EASE OF USE: A quick thumb release system allows you to switch from small to large primers easily and a hard stop so you can never over crush a primer.
  • INNOVATIVE: Features an adjustable seating system that helps prevent “proud” primers or crushing primers into cases.
  • DURABLE: Constructed of a heavy-duty die-cast zinc with steel internal components. The entire system stores in a robust injection molded case.
Check Stock

Zepp Tees Primer Shortage T-Shirt Will Work for Ammo Reloading Meme Grey XXL

  • Continue the search for primers in your new favorite reloading t-shirt. Got Primers?.
  • Will work for primers, brass, powder, 9mm or any available ammo. Maybe this could be a lucky handload shirt..
  • We feature the best meme shirts and other funny pop culture parody..
  • All shirts made from high quality Gildan blanks unless otherwise noted. Please check our sizing chart image to verify you're ordering the correct size. We accept sizing returns, but ask that you pay return shipping. Otherwise, we are basically losing money..
  • Proudly designed, printed, and shipped in the USA where we roll our own..
Check Stock

FithOps Camp Safe Full 209 Perimeter Trip Alarm Kit

  • Great for camping adventures and keeping wildlife away. Our perimeter trip alarm is small and easy to set up when you are out enjoying a camping, hiking, or backpacking trip..
  • Complete kit to put in your hiking backpack while out on an adventure. This comes with the perimeter trip alarm, the kevlar trip line, and a primer caddy. It DOES NOT INCLUDE primers!!!.
  • Comes with the smaller FithOps Perimeter trip alarm, 85' of kevlar trip wire, and a silicone EMPTY primer caddy. PRIMERS NOT INCLUDED.
  • All of our products are Made in the USA of quality material. Made of Machined Aluminum and Steel.
  • Official FithOps Gear Comes with FithOps Warranty and Customer Service.
  • Primers are NOT included! Please check to ensure you have access to them before you purchase..
  • This is a reusable, reloadable safety device. Please make sure you can find the 209 primers before purchasing..
Check Stock

1.5 mm Needle, Fluid Nozzle and Air Cap Set Only - Fits a Master Pro 33 Series High-Performance HVLP Spray Gun - Spray Automotive Car Paint Topcoats, Primers, Enamels, Industrial Woodworking Coatings

  • Master HP Pro 33 Series 1.5 mm Needle, Fluid Nozzle and Air Cap Set only. This 1.5 mm Atomizing Set fits the Master HP Pro 33 Series High Performance HVLP Spray Gun..
  • This 1.5 mm fluid tip size set up is ideal for use with primers, surfacers, polyester primers, 2K primers, sealers, clear coats, single stage, topcoats, enamels, and other medium to high viscosity paint coating materials..
  • Master HP Pro 33 Series spray guns are designed with the professional painter in mind. All gun components are made with exacting precision, so they provide exceptional performance with all types of automotive, industrial, and woodworking coatings..
  • Achieve perfect performance with all paint coatings because of the innovative technology in this spray guns needle, nozzle, and air cap system. Paint coatings are fully atomized with the ideal fan pattern to lay down perfectly for a clean even basecoat or topcoat finish..
  • Components are made with precision-engineered high-grade stainless steel and are suitable for the latest automotive waterborne paint coatings..
Check Stock

Permatex 84115 5-minute Plastic Weld Adhesive 0.84 oz.

  • Structural adhesive designed for general purpose bonding of a wide variety of materials.
  • Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination.
  • Requires no primers, sets in five minutes at room temperature.
  • Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for....
Check Stock

Sealproof 1.5\ Dia Flexible PVC Pipe, Swimming Pool and Spa Hose, Pool Plumbing Schedule 40 Tubing, Made in USA, 1-1/2-Inch, 50 FT, White

  • For use with PVC Schedule 40 type fittings.
  • Use with Listed PVC solvent cements and primers. Successfully tested for toxicity by an independent laboratory for use in Aquaculture..
  • Manufactured in the United States from high quality virgin PVC compound.
  • Less fittings required compared with PVC pipe.
  • Flexible PVC wall and cover for easy handling and installation.
  • FDA non-toxic formulation in compliance with IAPMO TSC 31-90.
  • Rigid PVC spiral resists crushing and impact.
  • Flexible for easy handling and installation.
  • All psi and va. rating are based on an open ended system at ambient temperatures.
Check Stock

ADAMAS-BETA Lab PCR 96 Well Plate,100μL Clear Full-Skirt PCR Plate,Pack of 10

  • Type: regular, upgrade (high temperature resistance to static electricity).
  • Function: In the polymerase chain reaction (Polymerase Chain Reaction, PCR), it is mainly used as a storage for primers involved in the amplification reaction, Taq DNA polymerase, dNTP, template nucleic acid, Mg, buffer, etc..
  • High quality: The product is well made, no scratches, no burrs, no black spots, suitable for conventional PCR machines..
  • Production environment: production and packaging in a clean space, using a non-contact and pollution-free fully automated production line..
  • Service: Customer satisfaction is always our top priority. If you have any questions about our products, please contact us and we will provide you with the best solution..
Check Stock

KILZ Restoration Primer, Interior, 5 Gallon

  • PRIMER | SEALER | STAINBLOCKER: KILZ RESTORATION Primer (Formerly KILZ MAX) is a new generation water-based primer, sealer and stainblocker offering performance of traditional oil and shellac-based primers. It blocks tough stains and odors and provides superior adhesion. Ideal for restoration and disaster recovery painting jobs..
  • ADVANCED FORMULA: The innovative modified acrylic epoxy formula provides superior adhesion and the performance of oil-based and shellac primers with the easy clean-up, low odor and low VOC of water-based. This formula also dries hard and sands easily which makes for a great enamel undercoater..
  • MULTIPLE SURFACES: Use on most interior surfaces including drywall, wood, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces. Surfaces should be free of dust, grease, chalk, rust and peeling paint prior to application. Use as a subcoat for flooring and carpets to block pet odors. Works with oil, alkyd and water-based paints..
  • SUPERIOR COVERAGE: This 5-gallon pail of KILZ RESTORATION interior latex primer covers approximately 1,500-2,000 square feet per gallon. Dries to....
Check Stock

System Three SculpWood Paste Epoxy Wood Filler, 0.5 Gallon Kit

  • Premium Epoxy: SculpWood Paste is a smooth, creamy 2-part epoxy finishing paste compound that's compatible with most water/solvent-based primers and paints.
  • Easy To Apply: Spread our Sculpwood epoxy paste evenly over the surface, slightly overfilling voids and cracks to ensure sufficient material is available for sanding.
  • Versatile Application: Excellent companion for SculpWood Putty when filling cracks and repairing small defects.
  • Wood filler can be used as a standalone product for exterior architectural repairs such as filling cracks, dings, or nail and screw holes.
  • Fast Curing: At 70°F, SculpWood Paste reaches a sandable state in 6-8 hours.
  • Once the wood filler reaches this state, it can be coated with primer and paint.
  • Tips and Tricks: Cold temperatures extend the cure time of this waterproof epoxy wood filler, while warmer temperatures reduce the cure time.
Check Stock