Categories

Best High temperature Stability

MTC25 Temperature Calibrator

  • Featured technology with divided zone temperature control enable its excellent homogeneity and stability: homogeneity±0.05℃(dry), ±0.01℃(liquid).
  • MTC25 adopts humanized design, 7 inch touch screen color display, friendly user interface.
  • could connect with external reference sensor,.
  • Maximum and minimum temperature alarm to prevent damage to sensors caused by excessive temperature.
  • support programmable control to realize fully automatic calibration..
Check Stock

3PCS HT-NTC100K Thermistor Sensor for Creality Ender 3 v2 Upgrade 3x15mm 3950 Compatible with E 3D V6 Volcano PT100 Ender-3-5 Pro CR10 3D Printer

  • 【Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor】Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • 【Widly Compatibility】Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • 【High Stability and Accuracy 】Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • 【Long Service Life】Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

Royal Purple 02514 Synfilm High Performance Synthetic Air Compressor and Industrial Lubricant - 2 oz.

  • Excellent high temperature stability and Oxidation and thermal stability.
  • Excellent low temperature flow characteristics.
Check Stock

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - 12v car water temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy an....
Check Stock

5-PCS Ender 3 Thermistor HT-NTC100K 3D Printer ntc 3950 100K Thermistor Sensor for Creality Ender 3 v2 Thermistor Upgrade Compatible with E3D V6 Volcano PT100 Ender-3-5 Pro CR10 hotend,

  • （Ender 3 Thermistor, Upgrade HT-NTC100K Thermistor (1 meter each)）：Cartridge temperature sensor. Metal head diameter: 3mm, head length: 15mm,cable wire length: 1 meter,connector: XH2.54 2PIN, （Suitable for heating blocks with holes of 3mm*15mm-3mm*20mm）.
  • Compatibility：Product recommended operating temperature -50 °C ~ +280 °C, can replace the cartridge K-type thermocouple temperature sensor. Suitable to print multi kinds of filament.Compatible with the heatblocks with 3mm hole,such as: V6 Volcano PT100 type heated block,CR10 plated copper high temperature heating block,etc.
  • Stability and Accuracy：Encapsulated in copper case,copper material has better thermal conductivity than stainless steel and improves accuracy.Secured with high temperature adhesive,high stability, no falling off.The internal temperature package to ensure the maximum service life with precision temperature measurement..
  • Long Service Life：Compared with other products of the same type that are insulated with ordinary heat shrinkable tubes, this product uses glass fiber with a temperature resistance of 400C degrees for insulation to avoid the possibility of thermal short circuit during high temperature work. Thereby increasing the service life..
Check Stock

uxcell Wirewound Ceramic Potentiometer Variable Rheostat Resistor 200W 1K Ohm with Knob

  • With the compact structure and heat dissipation design, a capability of overload has been built..
  • [ADVANTAGE]- Metal wire is wound on the tube coated with non-flammable material, good dissipation, high stability and long life. Wire Wound Resistor owns high stability and accuracy. Moreover, it was used for various application because of the wide resistance range..
  • [BEST CHOICE]High precision, high power, high precision of resistance, High temperature resistance, low noise during operation, stable and reliable, can withstand high temperature and long service life..
  • [WIDELY - USED]- This variable wire wound resistor is widely used in power supply, transducer, elevators, arena and high requirement equipment industry. aging, load, simulation load test and inverter. Consumption of brakes, cranes, etc..
Check Stock

RF Oscillator Module, VCO 515MHz-1150MHz Voltage Controlled RF Oscillator Frequency Source Broadband Oscillator Module

  • [Strong compatibility]:For Yaesu FT-817/857/897 and other models for temperature-compensated crystal components, fully compatible with the original TCXO-9..
  • [High stability]:he frequency is 22.625MHz, which can improve the stability of the machine after replacing the original crystal. It is superior to the original module in different environments..
  • [High cost performance]:The price is only 15% of the original module, and the cost performance is extremely high..
  • [Effect is remarkable]:Actual test the frequency of the crystal is observed with a high-precision frequency meter. The original crystal frequency is deflected with a fire-baked , but this temperature-compensated crystal has no obvious change, and the effect is remarkable..
  • [Simple operation]:Turn off the power of the machine, open the cover of the machine, find the position where the temperature compensation crystal is installed. You need to unplug the ordinary crystal of the machine, then insert it according to the stitching of the machine. After installation, you can start using it without any settings..
Check Stock

High Temperature Kapton Tape, Professional for Protecting CPU, PCB Circuit Board…

  • MYJOR heat transfer tape is made from polyimide film, High tensile strength.
  • High temp tape that is fit for SMT high temperature protection, good stability.
  • Heat tape for heat press tape work well in protecting electronic products, for 3D Printing, Soldering, Masking, etc.
  • Temperature range of heat resistant tape from Long-term temperature 500 ℉(260℃) to Short-term temperature 536 ℉(280℃).
Check Stock

CREWORKS Upgraded 2 in 1 SMD Soldering Rework Station with Hot Air Heat Gun Set, Electric Solder Iron Kit with Holder, LED Digital Temperature Display Screen and 8 Tips, 3 Nozzles

  • ... air gun holder. This machine will save you space and keep your work desk well-organized, separately controlled for efficiency and convenience..
  • Rapid Heating with PID----- The hot air gun can heat up to 480℃ in just 5 seconds while the soldering iron warms up to 200℃ in 7 seconds and they are able to hold their temperature steadily thanks to the PID technology, ultimate results guaranteed. This highly efficient heat gun blows at 120L/min while built-in fuse protection guarantees 100% safe operation..
  • Enhanced Temperature Stability ----- A high-performance microcomputer and PID technology provide quick-warming capabilities with improved temperature stability. Digital LED display to show real-time temperature, easily adjusted temperature with the up and down buttons..
  • Auto Sleep Function ----- Heat gun would automatically decrease the temperature when placed on the stand, the temperature would rise once picked up. the ergonomic handle guarantees comfort..
  • One Year Warranty ----- The handle uses high power capacity tips that make it easy to solder large joints, thick terminals, and tough jobs. We are committed to manufacturing products of high quality, offering the best value in the market..
Check Stock

Zerodis Constant Temperature PTC Electric Fan Heater for Car Small Space Heating Incubator 24V 180W

  • 【24V 180W】Safety, stability, energy saving, environmental protection and long service life are the most significant advantages of PTC products.....
  • 【Safety and stability】Safety, stability, energy saving, environmental protection and long service life are the most significant advantages of PTC....
  • 【Supplementary explanation】The product uses heat-resistant silicone wire as the wire, the red line is "+" and the black line is "-". When bare....
  • 【Warming up quickly】This heater uses high temperature wire as the wire, heating quickly and long service life. With mounting holes for easy....
  • 【Pay Attention】The power of the product is related to the use mode, heat dissipation conditions, environmental temperature and other factors. The....
Check Stock

Duragard Arctic Blue Hydraulic Fluid - 5 Gallon Pail

  • FULL SYNTHETIC - No compromise formulation, full synthetic with extremely high-performance metrics. EXTREMELY ECONOMICAL - Lowest cost per hour of operation. Period. MULTI-VISC FORMULATION for wide viscosity range applications..
  • TRUE ALL-SEASON - Extreme temperature range for arctic cold (-54 F) to hot desert summers. Trouble-free, long duration, flawless hydraulic response, and power transfer..
  • 7,000 -10,000 Hour RATING - Minimum 7,000 hour rating and up to 10,000 operational hours in severe service. ZERO FOAMING - Virtually zero foaming in high-stress environments and extremely rapid air release & air separation. Prevents hydraulic cavitation..
  • EXTREME THERMAL STABILITY - Highest viscosity index (194) of any commercially available hydraulic oil. Outstanding temperature tolerances and shear stability under high loads. Prevents overheating, blown hoses, over-pressure, and facilitates excellent heat transfer to keep hydraulic systems cool..
  • CONTAINS 300% ANTI WEAR BOOST - Exceptionally high ZINC levels and corrosion inhibitors to protect expensive pistons and all types of hydraulic pumps..
Check Stock

Conlense Incubator Accessories Incubator Temperature and Humidity Sensor Incubator Humidity Sensor Temperature Probe kit Industrial Incubator Accessories

  • Design: Designed specifically for industrial incubators, creating a healthy living environment for hatching eggs, even if the environment changes, it can quickly monitor changes in humidity and temperature.
  • Stability: high reliability and excellent long-term stability, ultra-fast response speed, good performance.
  • Easy to use: Use this easy-to-use digital thermometer and hygrometer to monitor the temperature and humidity of reptile tanks and glass containers..
  • Equipped with two probes: easy-to-use digital crawler thermometer hygrometer with two external probes, one for temperature monitoring and the other for humidity monitoring..
  • Widely used: This precise digital thermometer hygrometer can be used in any place where temperature and humidity need to be monitored. For example: glass containers, reptile boxes and cigar boxes..
Check Stock

Solomon SL-30 Soldering Station, Domestic, 110-volt

  • Solidly-Built Powerful Soldering Station- The Yihua 939D+ Soldering System is made for soldering. This system is enhanced in every aspects to differentiate itself from other soldering stations, with high power performance, upgraded heating element, flexible temperature from 392°F to 896°F, faster heating up, enhanced temperature stability and enhanced performance. Get your many soldering projects DONE with this capable & reliable 939D+ System!.
  • Built-in Transformer and Advanced Temperature Control -While the built-in transformer outputs safety low voltage with the high power stayed, the system’s advanced program monitors the operation temperature in just milliseconds and quickly correct deviations to achieve consistent temperature. Therefore, more stability and accuracy is provided. Perfect for household uses, hobby uses, school labs, repair workshops and precision electronics..
  • Durability is from the inside to the outside- Brushed Aluminum Technique frees the control panel from burnt marks. The accompanying soldering iron stand is separated & solid, providing the best convenience. You can freely set it to the left side or right side of the control unit. And regardless of the heat, the heat-resistant stand stands..
Check Stock