Categories

Best High tensile Anchor

VEVOR Boat Anchor Kit 8.5 lb Fluke Style Anchor, Hot Dipped Galvanized Steel Fluke Anchor, Marine Anchor with Anchor, Rope, Shackles, Chain for Boat Mooring on The Beach, Boats from 15'-24'

  • ...fect plug-and-play kit. It includes an 8.5 lb fluke anchor, a 98 ft of 1/3'' rope, a 6.6 ft of 5/16" chain, and two pieces of shackles & swivels. No more worrying about buying the rope and chain. A complete boat anchor kit for your sailing..
  • Superb Holding Power: Our fluke anchor is well constructed to maintain high tensile and outstanding stability. When you drop it, it will dig into the bottom and hold it tightly. Even in high tide and windy weather conditions, our anchor can keep your boat stable..
  • Premium Quality: Our boat anchor and chain are built with hot-dipped galvanized steel for long-lasting performance even in saltwater. And anchors are different from most products on the market in that it is not welded directly. The welded junction of the plow anchor is thermoweld first and then welded again with the welding wire. This high-quality process effectively avoids cracks in the anchors. The 3-strand twisted and braided nylon rope is stretchy and wear-proof..
  • Quick Set Design: With a low center of gravity and the self-aligning geometry, this boating anchor ensures that it can set and rest quickly and adequately. The lead chain adds weight to the anchor's shank, providing a better dig or bite into the bottom..
Check Stock

Jean Pierre Prestige Crystalline Nylon

  • High Quality Construction: Upgraded version battle rope is made of 100% polyethylene polyester material and covered by nylon sleeve to protect the rope from friction and make the rope more durable. Your weighted exercise won't wear and separate, even on concrete..
  • High Quality Configuration: 9 inch heat shrinkable handle, extreme tensile strength reinforced nylon anchor straps and shackles provides good protection for you, safer, firmer, antiskid grip in intense exercise.
  • Three Strand Stranded Design: Available in 30, 40 foot lengths and 1.5 inch thickness. The 30ft ropes are great for those new in rope training. And the 40ft ropes are great for more intense training and intermediate, higher level users..
  • Anytime, Anywhere: Simple installation, easy setup, can save you more time and energy for training. The attached anchor and belt can provide you with another way of training, creating a variety of training..
  • Package Include : 1 x Battle Rope with protective sleeve , 1 x Steel Anchor with 4 screws, 2 x straps with a lifting ring, 1 x Training manual.
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

13lb Heavy Boat Anchor Kit Fluke Anchor with Anchor Chain and Boat Anchor Rope Set for 20 - 32 Foot Including Boat Anchors for 21 and 25 Pontoon Deck Fishing and Sail 100FT Rope

  • ALL-IN-ONE KIT: Our heavy-duty boat anchor kit is all inclusive. Set consists of one galvanized steel fluke anchor, 8 ft. of 5/16 inch galvanized....
  • IDEAL FOR 20-32 FT BOATS: Works on various seafloors comfortably as well as various lengths including small 21' and 25'. Our 13lb fluke anchor,....
  • KEEPS YOUR BOAT SECURE: Our fluke style anchors for boats are well-made with high tensile strength, outstanding stability and superior dig. The boat....
  • FRESH & SALTWATER USE: Our anchor set is ideal for both salt and fresh water. The steel fluke boat anchor and chain are galvanized steel for maximum....
  • WHY CHOOSE BETTER BOAT PRODUCTS: We are a family owned American business committed to making premium quality products and our customers happiness. We....
Check Stock

8.5lb Heavy Boat Anchor Kit Fluke Anchor with Anchor Chain and Boat Anchor Rope Set for 15-25 Foot Including Boat Anchors for 18 and 21 Boats Pontoon Deck Fishing and Sail 75FT Rope

  • ALL-IN-ONE KIT: Our heavy-duty boat anchor kit is all inclusive. Set consists of one galvanized steel fluke anchor, 6 ft. of 1/4 inch galvanized steel anchor chain with bow shackles, and 75 ft. if 3/8 inch nylon rope with a stainless steel eyelet..
  • IDEAL FOR 15-24 FT BOATS: Works on various seafloors comfortably as well as various lengths including small 15', 18' and 21'. Our 8.5lb fluke anchor, weighted chain, and rope work on pontoon boats, deck boats, center consoles, sailboats and more..
  • KEEPS YOUR BOAT SECURE: Our fluke style anchors for boats are well-made with high tensile strength, outstanding stability and superior dig. The boat anchor fluke articulates with the weighted chain to help the shank in sand and mud and hold firmly..
  • FRESH & SALTWATER USE: Our anchor set is ideal for both salt and fresh water. The steel fluke boat anchor and chain are galvanized steel for maximum corrosion protection. The 78 feet of rope is nylon with stainless steel eyelets piece..
  • WHY CHOOSE BETTER BOAT PRODUCTS: We are a family owned American business committed to making premium quality products and our customers happiness. We stand behind the quality of our products and will provide you with the best customer service..
Check Stock

AFP 50FT Fall Protection Roofer Kit Braided Vertical Lifeline w/Rope Grab, 1 D-Ring Safety Harness, Hinged Anchor, Ballistic Nylon Tool Bag, Free Tool Lanyard | OSHA & ANSI Rated

  • ...ollow the user, providing freedom of movement. Alloy steel hardware ensures all weather performance avert wear and tear against all weather conditions..
  • ✅1 D-Ring Harness – Upgraded braided webbing designed with a high-tension stitching pattern for maximum security and tensile strength of over 5,000 lbs! The tough webbing is highly resistant to abrasion, aging, and won’t soften from frequent use. Alloy steel D-ring ensures all weather performance inhibiting breakage against all weather conditions. Rugged construction endures rough use, standing up to long periods of outdoor factors without tearing or fraying for added longevity..
  • ✅REUSABLE ANCHOR – Screws Included! Galvanized steel hinged anchor meets all ANSI, CSA, & OSHA safety requirements for residential and commercial roofing applications. Re-use this anchor bracket as part of your fall arrest system. Hinged design adjusts to most roof pitch and connects to roof surface as an anchor point. Made with quality materials to ensure corrosion resistance and durability with a tensile strength of 5,000lbs, this anchor is sure to stand against the toughest work environments..
Check Stock

FIVKLEMNZ Car Roof Bag Cargo Carrier Door Hooks, Use to Secure Roof Bags Without Need for Roof Rack, 4 Door Hooks Only

  • [NO RACK NEEDED] ROOF MASTER Roof Door Tie Down Hooks can be used as anchor point to secure Rooftop Cargo Carriers without using Side Beams or Cross Beams. This can save you a fortune..
  • [EASY TO FIT] Open door, pull back rubber door seal and fit hook under the welded metal lip. It takes seconds..
  • [SECURE] The anchor point under the door seal on a vehicle is very strong and will take 10X the force required to hold the bag to your roof..
  • [STRONG] Straps are made from high tensile nylon webbing and are flag stitched for strength. This provides the perfect anchor point for the straps that secure your Rooftop Carrier..
  • [INCLUDED] Only 4 X Door Hooks fitting instructions and 12 month warranty. 7×24 online customer support, ask us anything at any time..
Check Stock

KwikSafety (Charlotte, NC) SCORPION KIT | 1D Full Body Safety Harness, 6 ft. Lanyard Attached, 3 ft. Cross Arm Strap Anchor ANSI OSHA PPE Fall Protection Arrest Restraint Construction Roofer Bucket

  • SAFETY LANYARD - The 6’ internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards..
  • CROSS ARM STRAP (ANCHOR) - 3 foot long pass thru web anchor | Worker capacity is 310 lbs | Min. breaking strength is 5000 lbs | Anchorage equipment for a single user | The GIBBON GRIP cross arm strap is a premium fall protection tool / anchor strap with a large d ring connector | The perfect high rise guardian watching your back, web anchor fall protection arrest restraint safety equipment..
Check Stock

3/8\ x 2 1/2\ Lag Screw Expansion Shield Long Zinc Alloy Pk 300

  • Expansion shield anchor works with a lag screw to provide a secure hold in most materials including solid masonry, masonry joints, and uncracked concrete.
  • Anchor has an internally threaded body made of zamac alloy.
  • Meets Fed. Spec. GSA FFS-325C Group 2, Type 1, Class 2C specifications.
  • Ultimate tensile strength 420 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

uxcell 10pcs High Strain Corner Post Insulator for Electric Fence Wire Black

  • Designed to withstand the additional tension generated by the fence line pulling from the anchor point.
  • For use with poly wire, steel/aluminum wire, and high tensile wire.
  • Middle hole Diameter: 14.6 x 8.5 mm/ 0.57" x 0.33".
Check Stock

PeakWorks Roof Anchor Bracket, Fall Arrest System, Tool Connects to Wood Surfaces with Roofing Harness Safety Kit, ANSI OSHA Compliant, Durable Steel Adjustable Connector, Red, V8229100

  • SAFETY CERTIFICATIONS – Temporary roof anchor bracket meets ANSI Z359 18, CSA Z259 15, and OSHA safety requirements for residential and commercial roofing applications, ensuring your safety in the most dangerous conditions.
  • REUSABLE ROOFING TOOLS – Re-use this roof anchor bracket as part of your fall arrest system or roofing harness safety kit.
  • roof anchor connects to wood surfaces with a screw size of 3" x #10 (32 screws / 16 per side).
  • SUPERIOR QUALITY – Anchor bracket is made with the quality materials ensuring top strength and durability to stand up to the toughest working environments.
  • STRONG CAPACITY – Hinged roof bracket built with a minimum tensile strength of 5,000 lb. and has a 310 lb. weight capacity.
  • COMPATIBILITY – PeakWorks Roof Anchors are designed and approved for use only with PeakWorks connectors, or with components that are approved by PeakWorks to be compatible with this product.
Check Stock

Toggle Anchor Bolts Hollow Wall Anchors 304 Stainless Steel Scissors Type Heavy Duty X Anchor M8x150mm Pack of 4

  • 1. New utility and original design. Compare with traditional anchor fasteners, this kind toggle bolts who fixed objects hardly to fall off and make sure safer and more fastness..
  • 2. The specialty of the new toggle bolts is the X shape head (or called scissors head ) who can firmly grasp the inner wall. The X shape head expand like a scissors and provide incredible tensile strength and shear force..
  • 3. Easy installation and can be used repeatedly. The new toggle anchor bolts are widely used in indoor and outdoor such as fix bracket, awning, barriers, furniture, equipment etc..
  • 4. Beautiful shape and good material. All components are high quality 304 stainless steel and offers rust protection..
  • 5. Fit for any concrete, walls, bricks and especially for hollow wall, air brick, foam concrete block and so on..
Check Stock

KwikSafety (Charlotte, NC) GIBBON GRIP KIT 3’ Safety Anchor Cross Arm Strap Safety Lanyard Safety Harness and 20 lb Tool Lanyard ANSI Fall Arrest System OSHA Protection Harness Lanyard

  • SAFETY LANYARD & TOOL LANYARD – The internal shock-absorbing lanyard makes the RATTLER a more lightweight fall protection device. The dual-action, double-locking snap hooks prevent accidental rollout while remaining easy to latch on to your anchor point. The RATTLER has a 310 lb max capacity and the tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. The tool lanyard attachment has 2:1 Safety Factor and can hold tools up to 20 pounds..
Check Stock