Categories

Best High voltage Damping Winding

Rockville 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp RPA12

  • Rockville RPA12 5000 Watt peak/ 1400W RMS 2 channel power amplifier Pro/DJ amp.
  • Lcd displays volume in DB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping.....
  • Parallel Mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a....
  • Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-Ohm speakers. Level controls for precise setting and matching of....
  • Input impedance: 10K ohm balanced. Input signal voltage: 660mV – 1.5V. Input sensitivity: 0.7V. Damping factor: ( 100Hz, 10W, 4 ohms): 40.8. Damping....
Check Stock

iFlight 4pcs XING-E Pro 2207 2750KV Brushless Motor 4S for QAV FPV Racing Drone Quadcopter

  • The XING-E Pro is a very strong and powerful FPV motor for FPV racing, great value choice with well known XING performance. Focuses on quality, the XING-E series is affordable motors that are strong and durable.
  • This 2207 sized motor features a high-strength 4MM steel hollow shaft, single strand winding for performance, M3 shaft screws and larger 9X4X4MM NSK bearings.
  • The iFlight XING series motor is characterized by support 4S.
  • These 4 pack 2207 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups.
  • Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively.
Check Stock

iFlight 4pcs XING-E Pro 2207 1800KV Brushless Motor 6S for QAV FPV Racing Drone Quadcopter

  • The XING-E Pro is a very strong and powerful FPV motor for FPV racing, great value choice with well known XING performance. Focuses on quality, the XING-E series is affordable motors that are strong and durable.
  • This 2207 sized motor features a high-strength 4MM steel hollow shaft, single strand winding for performance, M3 shaft screws and larger 9X4X4MM NSK bearings.
  • The iFlight XING series motor is characterized by support 6S.
  • These 4 pack 2207 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups.
  • Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively.
Check Stock

Voltage Regulator Generator Voltage Regulator Board AVRKI-DAVR-50S3 Generator Set Voltage Stabilizer Gasoline Engine Excitation Board Generator Accessories (Size : KI-DAVR-50S3)

  • ★Adjustable voltage range, high voltage stability.
  • ★Adjustable damping or stabilization circuit and compatibility with remote voltage trimmer allow you to adjust the low frequency between 50-60 Hz..
  • ★Load regulation control, the regulator has a closed-loop control function, allowing you to adjust the load within the effective range..
  • ★Suitable for the maintenance, modification and upgrade of most voltage generating equipment, with high precision and long service life.
  • ★Made of flame-retardant and heat-resistant materials, super heat-resistant, stable and reliable in use.
Check Stock

iFlight 4pcs XING-E Pro 2207 2450KV 4S Brushless FPV Motors for QAV FPV Freestyle Drone Quadcopter

  • The XING-E Pro is a very strong and powerful FPV motor for FPV racing, great value choice with well known XING performance. Focuses on quality, the XING-E series is affordable motors that are strong and durable.
  • This 2207 sized motor features a high-strength 4MM steel hollow shaft, single strand winding for performance, M3 shaft screws and larger 9X4X4MM NSK bearings.
  • The iFlight XING series motor is characterized by support 4S.
  • These 4 pack 2207 brushless motor used standard M3 16mmx16mm mounting pattern at the bottom,160mm cable length for different frames and setups.
  • Each motor has been dynamic balanced, crush resistant damping bearing, eliminate vibration effectively.
Check Stock

Isolation Transformer / Ground Loop Isolator

  • Tightly coupled primary and secondary windings, sufficient pass frequency band, large original winding inductance, small leakage inductance, can reduce the influence of the hysteresis loss.
  • Suitable for radio communication, broadcast television, automatic control and component of voltage amplification or power output.
  • Can be used to transform voltage or transform load impedance.
  • Made of Nickel alloy material, stable performance and long service life.
  • High efficiency audio transformers, greatly help your project.
Check Stock

Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Amplifier Mono Car Amp+Remote

  • Features: Rockville RVA-M3 4000w Peak/1000w CEA RMS @ 1 Ohm Mono Car Amplifier, Metal Bass Remote Included, 1 Ohm: 1000 Watts RMS CEA Compliant (90dB, Under Voltage Protection at 9V, Over Voltage Protection at 16V, Radiation cooling keeps the amp running at high volumes for hours....
  • Damping Factor: >150 @ 100Hz, Fuse: 40A*3, Technology: This series uses a reliable Class D circuitry that gives you the most reliability and the most....
Check Stock

Proxxon 38704 AC Adapter Heavy Duty Transformer NG 5/E

  • Designed to transform voltage or change the impedance of a load..
  • The primary and secondary windings are closely coupled..
  • Sufficient passband, the original winding inductance is large, the leakage inductance is small, the influence of hysteresis loss can be reduced..
  • Stable performance, high reliability, convenient to use..
  • Used as components for circuits such as voltage amplification and power output in radio communication, broadcast television, and automatic control..
Check Stock

NEWTRY Electric Centrifuge Machine Desktop Lab Benchtop Centrifuges with Timer and Speed Control 4000rpm Capacity 20ml×6 800D 110V US Plug, 60HZ

  • ★[EFFICIENT MOTOR] The motor components have a high degree of tightness, the motors run stably, have zero error design, and are efficient and stable..
  • ★[100%PURE COPPER COIL] Pure copper wire is fixed on the stator by winding, and the magnetic field is fixed during the stroke. The higher the copper content, the stronger the magnetic force, the stronger the rotor power, the higher the rotation speed, and the greater the centrifugal force..
  • ★[RUNNING SMOOTHLY] The motor and the base plate are connected by a damping column. With integrated circuit, the motor rotor runs smoothly, which can avoid motor vibration and is firm and stable..
  • ★[HIGH STRENGTH PLASTIC, SIMPLE STRUCTURE] [High strength plastic, simple structure]: The machine shell is made of high-strength plastic. Its structure is quite simple and easy to operate..
  • ★[LOW NOISE,MUTE] A round centrifugal head with a top cover reduces noise..
Check Stock

Tripp Lite SmartOnline Step Down Isolation Transformer, 208V to 120V, 5kVA, 5kW, 2U Rack-Mount, TAA (SU5000XFMR2UTAA)

  • 【Work Stability】: Ring Transformer Model EI-14. Lead-free compatible electronic components. Isolation transformers, select high quality materials, stable work, convenient, long life..
  • 【AC impedance】: 600: 600 ohms. o Tightly coupled to the isolation transformer, primary and secondary windings, there is sufficient passband, the original winding inductance, small leakage inductance, can reduce the impact of lag loss..
  • 【High efficiency】: audio transformer 1: 1. These isolation transformers all high efficiency O transformers, EMI, high voltage, and stable performance..
  • 【Conversion voltage】: 10 PCS audio transformer 600: O transformer is typically used for conversion voltage or transform load impedance. Cyclic core.
  • 【After sales protection】: If you have damage or other questions, please contact us, we will reply you and handle any questions about you..
Check Stock

MSD 8253 Blaster HVC-2 Ignition Coil

  • Designed for racing applications with 6-series ignition.
  • Low resistance and efficient winding design.
  • Housing molded from high dielectric Rynite material.
Check Stock

8 Wrap Coils Machine, Liner Shader Brass Tattoo Machine Tool for Professional Tattoo Artists

  • Liner Shader - The brass coils tattoo machine can be used for liner and shader. It is a good helper for professional tattooists and is of great help to their tattoo work..
  • Voltage - The normal starting voltage of the tattoo coil machine tool is 5V, and the working voltage is 7-12V, so it is best for you to use the tattoo coil machine under this voltage range..
  • Accurate - The frame of the coil tattoo machine is made of alloy, which is very lightweight and processed by accurate wire cutting to avoid the size error of the manual machine and ensure the dimensional accuracy..
  • Stability - The stable working speed and high strength of the tattoo coil machine make it work for a long time without getting hot, strong striking force and low power..
  • 8 Wraps - The tattoo coil machine is an 8 wraps winding copper core coil, specially designed for the coil machine, which is very convenient and durable, I believe you will be satisfied..
Check Stock

MSD Ignition 82448 Pro Mag Timing Control

  • Produces higher voltage and spark energy.
Check Stock