Categories

Best High voltage Motors

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

Scam

  • 3 speed settings: the Avalon high velocity Twin reversible airflow window fan features 3 speed settings of low, medium and high. Select your comfort speed level with ease.Voltage:120 volts.Number of speeds:3.
  • Max cool technology: this Twin fan features a built in thermostat with ranges from 60 to 80 degrees, and LED lights that help you visibly keep track of the temperature setting.
  • Dual motors: this innovative double fan has two 9" fan heads with their own durable Copper motors. Copper motors are built to endure through all weather and situations.
  • Expandable side panels: our dual window fan will fit into any window easily with its built in dual expandable side panels that can expand an additional 6.5 inches on either side.
  • Reversible airflow fan: this double fan is uniquely designed to simultaneously operate for intake or exhaust purposes with its reversible blades. Dimensions are 24 x 12 x 4 inches.
Check Stock

ACEIRMC 8pcs L298N Motor Driver Controller Board DC Dual H-Bridge Robot Stepper Motor Control and Drives Module for Arduino Smart Car Power MEGA R3 Mega2560

  • When you are driving voltage (above logo for the 12 v input, can actually accept input range is 7 to 12 v) for 7 v to 12 v, can make to onboard power supply 5 v logic, when using the onboard after 5 v power supply, interface of + 5 v The power supply does not input voltage, but can yield 5V voltage for external use..
  • The chip manual proposes to support 35V, but according to the book When the maximum voltage is applied to the maximum voltage of 298 conservative applications to 24V, for example, the motor with a rated voltage of 18V shall be driven.
  • Great for for Arduino DIY Smart Car Robot Power MEGA R3 Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
Check Stock

AOICRIE 5Pcs L298N Dual H Bridge Stepper Motor Driver Board For Arduino (5pcs)

  • 【Package Included】- 2pcs L298N Motor Driver Controller Board Modules..
  • 【Item Condition】- Drive voltage 5V-35V, high working power to 46V. Large current can reach 3A MAX and continue current is 2A. Power to 25w.(NOTE: To avoid damage, please use an external 5V logic supply when using more than 12V driving voltage.).
  • 【High Quality】- Use L298N as the main driving chip, so the module has such features as strong driving ability, strong anti-interference and low calorific value. And it also use large-capacity filter capacitor and diode with freewheeling protection function, thereby improve the reliability of module..
  • 【High Efficiency】- Dual-channel H-bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • 【Easy of Use】- No assembly required. This L298N board comes ready to go. Just wire up motors and power, this thing will work wonders..
Check Stock

Amprobe AMB-25 Digital Insulation Resistance Tester

  • Insulation resistance meter to test insulation of wires, cables, transformers, and electrical motors.
  • Digital meter with automatic range selection.
  • Internal memory stores up to 9 test results.
  • Measures insulation resistance from 0 to 1,000 megaohms with 250, 500, and 1,000V DC test voltage.
  • Safety rated to European Standard EN 61010-1 Category III 1,000V.
  • Tests insulation of wires, cables, transformers and electrical motors.
  • Selectable test voltages 250V, 500V and 1000V.
  • Programmable timer to perform the dielectric absorption ratio test.
  • Sensitive ohmmeter for checking resistance of motor windings.
Check Stock

HiLetgo 10pcs 6A/125V 3A/250V ON/Off/ON 3 Terminals 3 Position SPDT Toggle Switch Single Joint MTS-103

  • 3 terminals, SPDT (ON/OFF/ON) 3 Positions..
  • Mounting thread diameter: 5. 7mm/ 0. 22inches.
  • Easy installation.Can be used on low voltage or high voltage circuits, Perfect for switching lights or motors..
Check Stock

MELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

  • Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge).
  • Great for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits.
Check Stock

MagicTech Steel Balance Toy Balancing Tumbler Toy Kinetic Art Balance Toy Decompressive Science Psychology Home Offic Decor Desk Toy PH04

  • Two‑way communication can be through , low voltage function, low voltage and failure ..
  • Double motors, , high sensitivity, long service life, durable, check the of the ..
  • Low‑ and high‑s, two‑way communication, you can check the of the through the , voltage function, undervoltage failure function..
  • Electric four‑wheel control system, the nce is stable than ESC, not easy to burn out..
  • Suitable for s, unicycles, balancing scooter, etc..
Check Stock

Greenhouse roll up Motor Greenhouse Frame Shed Roll-up Motor Electric Greenhouse Light Roll Up Motor for Greenhouse Roof Ventilation - 1x Roll Up Motors + 1x Creepers (E)

  • 【1x Roll Up Motors + 1x Creepers】The greenhouse roll up motors can be installed on the side of the greenhouse or rolled on the top, The controller makes the operation easier..
  • 【24V 100W Motors】This greenhouse electric film roller has 24v 100w motors, which fit for most of your film ventilation roll up work, electric greenhouse frame shed roll-up motor automatic venting solution..
  • 【Pure Copper Motor】This greenhouse roll up motor uses a pure copper motor and an aluminum alloy body, which is not easy to corrode and rust, and has a long service life..
  • 【High-quality Gear】The gear is the most critical part of the film rolling machine. Our film roll up motor adopts high-quality gears that have undergone special heat treatment, which has high stability and greatly improves operating efficiency..
  • 【Specification】Roll up motor: Power: 100 watt.
  • 【Widely Application】The electric roll-up motor for greenhouse is used extensively in greenhouse such as the solar, vegetable, breeding , flower, connecting film , fruit and other assembled greenhouse for automatic ventilation..
Check Stock

ALAMSCN 6PCS DRV8833 Motor Driver Module 1.5A 3V 10V 2 Channel Dual H Bridge Gear Motor Drive Controller Board

  • It can drive DC motors and 4-wire stepping motors with current less than 1.5A..
  • Built-in over-current protection, short-circuit protection, under-voltage lockout and over-heat protection, with low-power sleep mode..
  • Small size, easy to operate, can be used in DIY smart car robot..
Check Stock

DC-DC 12V to 5V 3A Micro USB Converter Voltage Step Down Regulator Waterproof Power Converters for Car Smartphone

  • HIGH CONVERSION RATE: This step down voltage converter uses high quality industrial-grade chip, with high conversion rate, and can transfer 12V to 5V..
  • INTELLIGENT PROTECTION FUNCTION: The USB voltage converter supports 3 intelligent security protection including over-current protection, over....
  • STRONG THERMAL CONDUCTIVITY: Fire retardant plastic casing and organic silicone sealing technology has strong thermal conductivity, IP67 ingress....
  • POWER SAVING: Adopting copper wire, the micro usb voltage converter has great electrical conductivity, low thermal, low carbon and saves more power..
  • WIDE APPLICATION: Widely used for car stereo, radio, monitoring, LED display, electric fan, motors and other electrical appliances, etc.
Check Stock

Genesis Twin Fan High Velocity Reversible AirFlow Fan, LED Indicator Lights Adjustable Thermostat & Max Cool Technology, ETL Certified, White (A1WINDOWFAN)

  • 3 speed settings: the Avalon high velocity Twin reversible airflow window fan features 3 speed settings of low, medium and high. Select your comfort speed level with ease.Voltage:120 volts.Number of speeds:3.
  • Max cool technology: this Twin fan features a built in thermostat with ranges from 60 to 80 degrees, and LED lights that help you visibly keep track of the temperature setting.
  • Dual motors: this innovative double fan has two 9" fan heads with their own durable Copper motors. Copper motors are built to endure through all weather and situations.
  • Expandable side panels: our dual window fan will fit into any window easily with its built in dual expandable side panels that can expand an additional 6.5 inches on either side.
  • Reversible airflow fan: this double fan is uniquely designed to simultaneously operate for intake or exhaust purposes with its reversible blades. Dimensions are 24 x 12 x 4 inches.
Check Stock

35A Electronic Speed Controller 3~6S Brushless ESC AM_32bit RC Controller Compatible for RC Crawler Truck & RC Car Model

  • The continuous current of 35A ESC is 35A, and the instantaneous peak can be up to 40A(≤10S). The working voltage is DC10V to 25.2V.
  • Electronic speed controller is supported DShot150/ 300/ 600/ 1200/ Oneshot/ Multishot and PWM, specializing used in RC car models, such as RC crawlers, trucks, cars. Please note, this ESC only can use for RC car models.
  • The input voltage is suitable for a 3~6s lipo battery. It is optimized for RC outrunner motors, suitable for EVO series motors and other outrunner motors, which can have well-used in RC car models.
  • The throttle signal cable is twisted pair, which is more effective, long life, and reduces interference, making the flight more stable.
  • The size of 35A ESC controller is 1.26 x 0.63 x 0.24in (32 x 16 x 6mm) and the weight is 8.1g(Including wires). The package included one electronic speed controller.
Check Stock