Categories

Best Hitachi Table Saw Reset Button

Digital Angle Finder Protractor 2 in 1 Miter Saw Protractor Angle Finder Ruler with 7inch/200mm Angle Measuring Tool for Woodworking/Carpenter/Construction/DIY Measurement 2 Batteries Included

  • ...er】TBVHOMM protractor has the function of a ruler and a protracting tool. The combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal and external angles. Suitable for woodworking, construction, drafting and other fields..
  • 【2 Batteries Included】It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you a additional battery as a spare..
  • 【Large LCD Display & Accurate Reading】 TBVHOMM digital protractor is equipped with a large LCD display for easy reading.
  • 【Lock, Zero, Hold and Reverse Angle Functions】This protractor can be locked at any angle by rotating the Locking Knob and pressing the HOLD function button will hold the reading. When you take large angle measurements and reverse measurements, long press the Rev button and the display can be read upside down. Zero button can reset the angle measuring tool at any time..
  • 【Wide Application】Combining the functions of a digital angle meter and a protractor, it can be used to measure all the angles in your workshop for a wide range of uses, such as checking the angle of a table saw blade or the accuracy of a miter saw, making angle cu....
Check Stock

Urethane Band Saw Tires Fits – Hitachi Cb13F Hitachi Cb13F – Super Duty Bandsaw Wheel Tires – Made in the USA

  • EVERLASTING : DNLK band saw tires are made of high-grade, friction-resistant, ultra-durable urethane with superior load-bearing capacity and thermostability. We guarantee dependable performance in both cold and hot environments..
  • MADE IN THE USA: Our urethane tires for bandsaws are EXCLUSIVELY designed and produced in the USA under rigorous quality control by certified authorities..
  • OUTSTANDING PERFORMANCE: Each Blue Max band saw tire features an evenly distributed embossed AcutrackTM finish for preciseblade tracking, superior noise reduction and shockabsorption..
  • NO ADHESIVE, NO SOAKING NEEDED: Our set of 2 urethane bands comes with the necessary tools for quick and easy bandsaw wheel replacement..
  • DNLK urethane band saw tire will fit HITACHI CB13F HITACHI CB13F band saw.
Check Stock

Hitachi 322955 Dust Bag for C10FCH C12FDH C12LDH - 2 Pack

  • Compatible with Hitachi Miter Saw Models C8FSE, C8FSHE, C10FCE2, C10FCH, C10FCH2, C12FDH, C12LDH, C12RSH, and C12RSH2.
  • Measures Approximately 12 inches long and 5 inches deep.
  • Includes: (2) Hitachi 322955 Dust Bags for Miter Saws.
  • Same tools. New Name. Hitachi Power Tools has renamed to Metabo HPT.
Check Stock

Digital Angle Finder Protractor,2 in 1 Auzof Angle Finder Ruler,7Inch / 200mm Stainless Steel Angle Measuring Tool with LCD Display for Woodworking/Carpenter(2 Batteries Included)

  • ...tant stainless steel straightedge, laser scale straightedge measurement error 1mm, Measuring Range: 0-360°.
  • 【Lock, Zero, Hold and Degree conversion Functions】This protractor can be locked at any angle by rotating the Locking Knob and pressing the HOLD function button will hold the reading.Long press on the "Rev" button, the display can be converted ° and ′. Zero button can reset the angle measuring tool at any time..
  • 【Large LCD Display &2 Batteries Included 】 Auzof digital protractor is equipped with a large LCD display for easy reading Resolution 0.1° Clear readings even in low light conditions,Also It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you a additional battery as a spare..
  • 【Wide range of applications】Combining the functions of a digital angle meter and a protractor, it can be used to measure all the angles in your workshop for a wide range of uses, such as checking the angle of a table saw blade or the accuracy of a miter saw, making angle cuts or measurements, trimming or wall angle measurements. A perfect Christmas gift for woodworkers, architects, DIY enthusiasts, etc.
Check Stock

Table Saw Fence Parallel Positioning Tool, Aluminum Alloy Saw Blade Alignment Jig Table Saw Indicator Gauge Woodworking Aligning and Calibrating Adjustable Limit Pin Positioning Ruler

  • Size: Precision steel pin is 350mm/13.78 inch.
  • Fixed block is 54x105mm/2.13x4.13 inch. Our simple set works with any table saw that has a miter slot nominally 3/8" x 3/4"..
  • Fence Alignment: Before it works, please either set or confirm the alignment of your fence to your table, then lock it and make a mark on the fence where the probe touches..
  • Repeat Cuts: When you have your fence set for a certain critical cut, but you have to change it for something else. When you need the fence back at the same spot, just slide the Simple Set back in the track and reset your fence..
  • Easy to Use: You just need to slide the probe until it touches your fence to check your saw blade to miter slot alignment, and lock the thumbwheel. A simple set of fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot..
  • Simple set fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that' s it - a physical reference between the miter slot and the fence..
Check Stock

Drill Press Chuck Fits - Delta 11-990 Type 1 Drill Press - 1/2 Inch Heavy Duty Keyless Drill Chuck - Replacement Drill Chuck - Made in the USA

  • ▶Part Number: SW7A SW7B 489105-00 901801 1344600 400060680002 903981 1343759 46023 438010170141 OR90037 OR9OO37 0R90037(Safety On-Off Toggle Table Saw Grinder Sander Switch).
  • ▶Applications: Compatible with Dewalt, Rockwell, Hitachi, Reliant, Performax, Dayton, Jet, Craftsman OR90037 OR9OO37 0R90037, Harbor Freight, Grizzly, Northern Tool, Powermatic, Ryobi BD46023 J-9301 E156275, Delta 489105-00 11-900 11-950 11-980 11-985 11-990 14-040 17-900 DP400 DP300L 17-950L Drill Press, 34-670 36-600 36-977 36-978 36-980 36-981 TS200LS 36-982 BS100 BS220LS SM200L SM400 TS200 TS220LS TS300 TS350 22-540 23-655 23-675 28-150 28-195 28-560 31-325 36-977 36-978 36-979 36-980 36-981.
  • ▶Also Compatible with 36-982 37-275X 37-380 46-715 31-120 31-250 31-252 31-255X 31-340 31-460 31-695 31-750 31-780 SA350 SA446 SM500 Sander, 22-540 22-560 22-565 22-580 Planer, Ryobi 080900062530 BD46023 080900062522 BD4600 BD4601 BD4601G Sander, Black and Decker Power Tools, BDSA100 Sander, SM300 Drill Press, Power Tools Planer Band Saw Drill Press Table Saw Grinder Sander.
  • ▶Warranty: Returnable for 6 Months and Changeable for 1 Year(return and change for free).
Check Stock

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • ...sm on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Angle Finder with LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement,the display could read up-side-down.The function of automatic shut-off after 6 min saves energy of the battery..
  • 【Easy Operation & Wide Application Angle Protractor 】Many uses, for example as miter saw protractor or for checking angle of blade on table saw or accuracy of miter saw, making angle cuts or measurements, trim / wall / corner angle measuring, bending tubing and metal sheets. Caution: This protractor for woodworking has sharp corners. Handle with necessary care.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPEAR ON BRAND-NEW PRODUCT..
Check Stock

999038 999026 NEW Japanese Carbon Brushes compatible with Hitachi C12LDH P50SA HU12M 18 x 13 x 7mm

  • FBA.Dimension : 18 x 13 x 7mm. Original Code :999038 999026. Product Type : Replacement (Aftermarket). Condition : New. Material: Japanese TOYO TANSO Carbon.Item locationg:USA.Made In China..
  • Compatible with: Hitachi Saw: C10FCE C10FCH C12 C12FDH C12FSA C12LC C12LCH C12LDH C12LSH C12RSH C6NT C7BD C7BD2 C7BMR C7SB C7SB2 C7YA C8 C8U C8V C9 C9BA2 C9BU2 C9SA2 C9U C9U2 CC12SA CC14SA CC14SB CS28B CS35B CS280A CS350B..
  • Compatible with: Hitachi Angle: GP13 G18 G18DF G18SC G18SD G23SA G23SB FY-40B.Polisher: SAH -180 SR15 SR15M. Sander / grinder: S18Y SB11 SB110..
  • Compatible with: Hitachi Hammer drill / drill: BM60M BM60Y BLU4 BM35T1 IE45MR IE50SA IE50SA1 IE50SB IE55 DU-PN2 H55SA H55SB H55SC. Planing: P20SD P40 P50 P50K P50SA PDE -180 PG21SA..
  • Compatible with: Hitachi Crosscut and miter saw: CC12SA-M CC16 CC16M HU12 HU14 HU12M HU14M. Nibblers / Scissors: CN45SA CN60SA..
Check Stock

Mini Hobby Table Saw 180W Portable Precision Table Saws with 4 Blades 25/32 Inch Cut Depth Multifunctional Small Cutting Saw for Woodworking Crafts Handmade

  • 【Powerful motor】This mini table saw adopts pure copper core motor, which is High-speed and strong power, faster speed, energy-saving and....
  • 【Convenient】It is a tiny table saw, please check the machine dimensions (L x W x H) 11x7.9x5.9", weight 6 lbs, compact size, easy to carry and....
  • 【One-key switch working mode】Press the button up and the machine will be in reverse state, used for grinding and engraving.
  • 【Application】This 180w mini cut off saw can be used in the production of household DIY handicrafts, suitable for cutting acrylic boards, bakelite....
  • 【High quality】This precision table saw adopts a fully enclosed metal shell, which is upgraded and thickened, dustproof, shockproof and durable.....
Check Stock

SHALL Oscillating Tool, 4.5A Oscillating Multitool Kit with 5° Oscillation Angle, Quick Change & Kickback Protection, 6 Variable Speeds, Auxiliary Handle, 34Pcs Saw Accessories and Carry Bag Included

  • Easy Change with Kickback Protection: Able to change saw accessories easily without using other tools and prevent clamps the finger. Universal, fits most brands’ saw blades, sanders, and other accessories. Quick change by tool-free blade system, Just three steps to replace the accessories (move the flip button, change the saw blade, reset the button).
  • Auxiliary Handle: Two-position side handle, can be mounted left or right. Provides convenient and stable operation, anti-vibration and reduce hand fatigue. Ergonomic design and anti-slip handle offers comfortable hand feel during operation.
Check Stock

Metabo HPT Compound 10 Miter Saw with Sawhorses

  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT.
Check Stock

Hitachi 948583 Miter Gauge Assembly for Hitachi CB75F Band Saw

  • Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name..
  • Compatible with the Hitachi CB75F band saw.
Check Stock

Metabo HPT Jig Saw, Variable Speed (CJ160V)

  • Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
  • Includes: CJ160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (x10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter, Sub Base, Carrying Case.
  • Auto-mode feature runs the tool at half power and ramps up to full power once a load is detected for easier starts, less vibration and more control.
  • 7. 0 amp motor, intense power for the toughest woodworking jobs.
  • Electronic speed control maintains SPM while cutting.
  • Stroke length of 1-1/32", Ideal for many woodworking applications.
  • Tool-less blade changing system for quick and easy blade replacements.
  • Multi-position switch, to angle blade for beveled cuts.
  • Included Components: Cj160V Jig Saw, No. 41 Jig Saw Blade (725389), No. 42 Jig Saw Blade (725379), No. 123X Jig Saw Blade (X10) (725394), Allen Wrench (944458), Splinter Guard (338994), Chip Cover (338996), Dust Collection Adapter (321591), Sub Base (339018), Carrying Case (339017).
Check Stock