Categories

Best Hitch Bumper Guard With Led Lights

Autogem Officially Licensed RAM Hitch Cover Black

  • Long life LED light powered Dodge Ram tailgate emblems.
  • Add a stylish touch to your vehicle with Officially licensed, LED Lighted Hitch Cover For a clean look, use an extension to place the wire behind the bumper on certain models..
  • Light-up insignia activates when running lights are on and brightens when brake pedal is pressed (Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights).
  • Durable plastic is corrosion resistant, Fast, easy installation-Some drilling required.
  • Wiring harness plugs into your vehicle’s existing 4-pole trailer connector & Hitch cover slides into receiver, keeping out dirt and grime..
Check Stock

Dasen Universal Tow Hitch Receiver Light Bar Mount Bracket Compatible with Dual LED Cube/Work Lights Pod Backup Rear Reverse Truck Trailer SUV Off-Road

  • 【Fitment】:Design for most trucks, pickups, SUV, Jeep, ATV, 4x4, Boats and trailers with 2.5"-3" towing hitch, good for many Cube/Pod LED lights to function as backup reverse lights, driving lights/fog lamps, daytime running lights, search lights etc..
  • 【Universal Tow Hitch】Please make sure you have enough clearance space for installation! You must have at least 18mm (1.8cm/0.7in) of surrounding gap between the tow hitch, bumper, and metal plates in order to fit the tow hitch bracket..
  • 【Upgraded desing】The tow hitch can clamp around most 2.5" inner openings Class 1, Class 2 tow hitches and some 3" inner opening heavy duty tow hitches as well..
  • 【Easy to Install】:Exclusively designed custom mounting brackets allow for a direct and easy bolt-on installation without any drilling, cutting or modification required..
  • 【Package Including】: 1x Tow Hitch Mounting Bracket..
Check Stock

Hooke Road Cherokee XJ Metal Front Bumper and Rear Bumper Combo Compatible with Jeep Cherokee XJ 1984-2001

  • FITMENT: Full Width Front and Rear Bumper Kit Compatible with Jeep Cherokee XJ 1984-2001 Models. Moderate installation needs minor cutting to install front bumper...
  • DESIGN: The front bumper Integrated grille guard hoop provides superior protection..
  • EXTEA LIGHTING: 2×18W LED spotlights and 2×18W LED floodlights included..
  • CORROSION RESISTANCE: The bumpers were made of heavy duty 9-gauge(5/32 inch) steel. Textured black powder coat finished. Premium E-coating process for 5-year corrosion protection under normal use..
  • FOR OFFROAD: Front bumper has built-in winch plate for up to 12000 lbs use. Rear bumper has 2" standard hitch receiver. Include 4 D-rings and D-Ring isolators..
Check Stock

Bully CR-600 Chrome Stainless Steel Universal Fit Truck Hitch Step Fits 2 Hitch Receivers for Trucks from Chevy Chevrolet Ford Toyota GMC Dodge RAM Jeep

  • Bump Step: it is widely used to gain easy access to the truck bed, luggage racks, or rear cargo area of a vehicle. Hitch steps double-up as bumper guards and can protect against damage from low impact rear-end collisions..
  • Durable Construction: the sturdy hitch step is manufactured using 16-gauge steel to withstand extreme compressions. The non-slip, high-impact rubber step pad adds to the overall strength of the access step.
  • Easy Installation: use of a plug-and-play helps with quick, effortless installation. Once installed, the rubber pad of the multi-purpose utility step ensures users get a secure, comfortable footing at all times.
  • Universal Fit: the utility bumper guard is designed to fit standard 2 in hitch mounts. This bumper guard is suitable to for most common-sized hitch receivers.
  • Specifications: the access step measures 18in. wide, with a tube diameter of 3in. Heavy-duty construction makes the hitch step perfect for sports trucks and SUVs.
Check Stock

Hooke Road Tundra Solid Steel Front Bumper w/Skid Plate & Rear Bumper Kit Compatible with Toyota Tundra 2007-2013 Pickup Truck (Textured Black)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a skid plate for engine protection. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light.
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate.
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use.
  • Order will be shipped in 2 packages. Package 1: Assembled front bumper.
  • 1×120W LED light bar(22 inches) and 2×18W LED cube lights. Mounting hardware accessories.
  • Installation instruction. Package 2: Assembled rear bumper.
  • Front bumper weight about 105 lbs. Rear bumper weight about 92 lbs.
Check Stock

ECOTRIC Steel Rear Bumper Compatible with 2007-2018 Jeep Wrangler JK with Tire Carrier Bumper w/Lockable Tire Carrier 2″ Receiver 2Pcs High Powered LED Floodlights Textured Black 2 Packages

  • FITMENT: Compatible with Jeep Wrangler JK & Unlimited 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018..
  • HEAVY DUTY: ECOTRIC Jeep Wrangler JK Rear Bumper & Tire Carrier Kit. Bumper integrates high-powered 18W LED Work lights for increased visibility. Durable textured black powder coat finish for corrosion protection and durability..
  • LOCKABLE TIRE CARRIER: Rear bumper with tire carrier is perfect for off-road driving. You can increase the spacing by adjusting up and down, accommodate up to a 37″ Tire. Furthermore, LED lights not only create visual aesthetics, but also provide you with illumination and safety on dark roads..
  • PAKAGE INCLUDED: Heavy duty 1/8″ Steel Construction Bumper.
  • Hardware shown in the picture is Included. You will receive two packages..
  • INSTALLATION: Instruction is not Included.No cutting and no drilling required. Professional installation is recommended..
Check Stock

Hooke Road Tacoma Rear Back Steel Bumper w/2 ×18W LED Floodlights & D-Rings Compatible with Toyota Tacoma 2016 2017 2018 2019 2020 2021 2022 Pickup Truck

  • FITMENT: Solid Steel Rear Bumper Fits for 2016 2017 2018 2019 2020 2021 2022 Tacoma Models. Directly bolt-on installation, no cutting or driling required. Work with factory towing hitch.
  • DESIGN: Rugged styling and full protection rear bumper. Equipped with led lights for extra lighting. Not compatible with factory back-up sensors. Include mounting holes for licence plate.Pre-formed cut-outs to accommodate factory license plate lights..
  • CONSTRUCTION: Heavy-duty, high tensile 10 gauge (9/64 inch) & 8 gauge(11/64 inch) steel construction..
  • CORROSION RESISTANCE: Texured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • 2 D-rings (9500 lbs rated, d-rings w/ rubber rings).
  • Installation instruction. (Bumper weight: about 76 lbs)..
Check Stock

Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25 and 2 Hitch Receivers for Trucks from Chevy Chevrolet Ford Toyota GMC Dodge RAM Jeep

  • It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Racks, Or Rear Cargo Area Of A Vehicle. Hitch Steps Double-Up As Bumper Guards And Can Protect Against Damage From Low Impact Rear-End Collisions.
  • Durable Construction: The Sturdy Hitch Step Is Manufactured Using 16-Gauge Steel To Withstand Extreme Compressions. The Non-Slip, High-Impact Rubber Step Pad Adds To The Overall Strength Of The Access Step.
  • Easy Installation: Use Of A Plug-And-Play Helps With Quick, Effortless Installation. Once Installed, The Rubber Pad Of The Multi-Purpose Utility Step Ensures Users Get A Secure, Comfortable Footing At All Times.
  • Universal Fit: The Utility Bumper Guard Is Designed To Fit Standard 2In. Hitch Mounts. This Bumper Guard Is Suitable To For Most Common-Sized Hitch Receivers.
Check Stock

Autogem Compatible/Replacement for LED Light Hitch Receiver Covers Officially Licensed Jeep Hitch Cover Black/Chrome

  • Light-up insignia activates when running lights are on and brightens when brake pedal is pressed (Low illumination while you’re using tail lights & High illumination when you brake or turn on the hazard lights).
  • Wiring harness plugs into your vehicle’s existing 4-pole trailer connector & Hitch cover slides into receiver, keeping out dirt and grime.
  • Add a stylish touch to your vehicle with Officially licensed, LED Lighted Hitch Cover For a clean look, use an extension to place the wire behind the bumper on certain models.
Check Stock

Hooke Road Ram 1500 Steel Bumper Front + Rear Full Width Bumper Combo with LED Lights & D-Rings for 2013-2018 Dodge Ram 1500 (Exclude Rebel)

  • FITMENT: Easy bolt -on install front and rear bumper kit fits 2013-2018 Ram 1500(Excluding Rebel) Models Regular Cab | Quad Cab | Crew Cab, Not compatible with OE sensor..
  • FRONT BUMPER: Integrated grille guard hoop provides superior protection. 4×18W LED Spotlights for extra lighting..
  • REAR BUMPER: Rugged styling and protection. Integrated steps for easy access to truck bed. 2×18W LED floodlights for extra lighting. Retains factory receiver hitch..
  • CORROSION RESISTANCE: Heavy duty 9-gauge(5/32 inch) steel construction.Textured black powder coat finish, premium E-coating process for 5-year corrosion protection under normal use..
  • FOR OFFROAD: Front bumper winch plate - rated up to 12,000 pounds. Include front and rear high strength D-ring mounts and D-rings with Isolators..
Check Stock

Bully BBS-1104L Black Bull Series Steel Universal Fit Truck LED Brake Light Hitch Step Fits 1.25" and 2" Hitch Receivers for Trucks from Chevy (Chevrolet), Ford, Toyota, GMC, Dodge RAM, Jeep

  • Bump Step: It Is Widely Used To Gain Easy Access To The Truck Bed, Luggage Racks, Or Rear Cargo Area Of A Vehicle. Hitch Steps Double-Up As Bumper Guards And Can Protect Against Damage From Low Impact Rear-End Collisions.
  • Durable Construction: The Sturdy Hitch Step Is Manufactured Using 16-Gauge Steel To Withstand Extreme Compressions. The Non-Slip, High-Impact Rubber Step Pad Adds To The Overall Strength Of The Access Step.
  • Easy Installation: Use Of A Plug-And-Play Wire Harness Helps With Quick, Effortless Installation. Once Installed, The Rubber Pad Of The Multi-Purpose Utility Step Ensures Users Get A Secure, Comfortable Footing At All Times.
  • Universal Fit: The Utility Bumper Guard Is Designed To Fit Standard 2In. And 1 ¼ In. Hitch Mounts. This Bumper Guard Is Suitable To For Most Common-Sized Hitch Receivers.
Check Stock

Rear 2’’ Receiver Trailer Tow Hitch Step Bar Bumper Guard W/Led Brake Light For Truck Suv Van

  • Precision designed to match your vehicle’s body lines. Trailer hitch step bar are a great addition to any truck, suv, or van. They can protect the vulnerable, molded bumpers in the event of a collision.
  • Solid all-welded construction for maximum strength and safety. High quality steel constructions,they come prepped with advanced powder coating. Rust protection. Built to strict quality control standards.
  • Rear hitch drop step bar bumper guard is waterproof and shock-resistant. Able to withstand road abuse & heavy duty towing purposes to it's specified capacities.
  • Quick installation,easy bolt-on. No cutting and no drilling. Bolts and instruction are not included.
  • 350 Lbs Weight Capacity,32.5" Long Bar. 2.25" diameter square Bar. Fits 2" Receivers. Package Include: 1 X Trailer Hitch Step Bar(W/Led Brake Light).
Check Stock

Rear Bumper Compatible with 87-06 Jeep Wrangler TJ YJ Unlimited With 2 x LED Lights 2 Hitch Receiver D-rings Off-Road Style Black Texture

  • Fits：This rear bumper perfectly fits 87-06 Jeep Wrangler TJ YJ..
  • Specification: The item is 100% Brand New. The surface is black with well powder coated. The material is heavy duty steel,with superior....
  • Feature: Manufactured from 3/16" mild steel plating and 2"x0.120" tubing. With 2" hitch receiver & 2 D-rings & 2x 40W LED Lights,textured off road....
  • Package Include:1x Rear Bumper, 2x 40W LED Lights, 2x D-rings,1 Set of Hardware..
  • Installation: Bolt-on Installation. No drilling or cutting is required..
Check Stock