Categories

Best Hitch Tightener Clamp

CZC AUTO Hitch Tightener Heavy Duty Anti-Rattle Stabilizer for1.25 2 Inch Hitch, Rubber Coated Lock Down Hitch Stabilizer Set with a Wrench for Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount

  • Firm and Solid with a Long Lifespan. CZC AUTO rubber coated trailer hitch tightener equiped with φ0.4 inch U-bolt that coated with orange rubber for a better silence feature.
  • Zinc plated flat wahsers, spring washers, nuts and 0.28 inch thick black powder coated plate are anti corrosion. The heavy duty rustfree anti rattle stabilizer can undertake all weather condition and serve for a long time..
  • Vital Specifications. The tow clamp is perfect for locking 1-1/4 inch and 2 inch hitches Only ( If you need bigger one, please find: B07Z36ZXBT). This hitch clamp is compatible with most hitch brands reese towpower, maxxhaul, connor and hitches classes I, II, III, and IV (1, 2, 3 and 4). It's suitable for trailer truck SUV sedan RV camper van and minivan..
  • Superior Performance in Universal Application. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc, this lock down hitch stabilizer helps to decrease noise and give you a quiet world when towing..
  • Easy to Install. After inserting the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, there is a risk for U-Bolt to....
Check Stock

MAHLER GATES Anti Rattle Hitch Tightener Clamp Heavy Duty 2 Inch Trailer Hitch Stabilizer

  • Widely Application: Anti rattle hitch tightener fit for 2" receivers. Designed for use with almost all hitch mounted bike racks and cargo carriers..
  • Function: Hitch anti rattle was designed to completely eliminate the hitch wobble at the junction of trucks, trailer ball racks, bicycle racks and....
  • Easy to Install: A simple design that is quick and easy to install, simple to use..
  • High Quality: Hitch tightener anti-rattle stabilizer made of high-quality steel, the black powder coating provides durable and enhanced rust and....
  • Package: 1 set of 2" heavy duty hitch coupling clamp(screws included)..
Check Stock

Hefty Haul Trailer Hitch Tightener for 1.25" and 2" Hitch Anti Rattle, Heavy Duty Steel, Anti Rattle Hitch Tightener 2 Inch, Trailer Hitch Accessories, Hitch Clamp, Tow Hitch Stabilizer, 1 Pack

  • Compatibility: anti rattle hitch tightener works with Classes III, and IV Hitch Receivers (1.25" and 2"), hitch stabilizer 2 inch. This hitch clamp will keep your trailer hitch from shaking and rattling when you drive down the road..
  • Durable and Heavy-Duty: The rubber coated U-Bolt and .31" thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads..
  • Perfect Fit: Adjustable fit and high quality materials ensure a quiet and stable towing/hauling experience. Perfect for hitch receivers, hitch racks, hitch anti rattle, anti rattle hitch pin and more..
  • Convenient and Easy Installation: Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place with the included hardware. Trailer hitch accessories..
  • What's Included: Trailer hitch stabilizer with rubber coated U-bolt, tightener plate, 2 lock washers, 2 flat washers, and two nuts with complete instruction..
Check Stock

CURT 22325 No-Tool Anti-Rattle Hitch Clamp Tightener for 2-Inch Receiver, Hollow or Solid Shanks

  • QUIETER TOWING. The CURT anti-rattle hitch clamp promotes quiet towing of your trailer by clamping down onto the receiver hitch connection. Warning: Anti-rattle clamp must be used in conjunction with a properly secured hitch pin.
  • EASY TO USE. This easy-to-use anti-rattle hitch tightener requires zero tools for installation. Simply clamp the U-bolt down onto the shank and receiver tube opening and engage the locking lever, Constructed from high-strength steel and lightweight aluminum.
  • VERSTATILE FIT. This anti-rattle device fits virtually any 2-inch receiver tube. It can be used with hollow or solid shank hitch accessories.
  • ADJUSTABLE. To ensure a tight fit over your hitch connection, this hitch clamp is easy to adjust. Simply twist the threaded nut and lever.
  • TOUGH BUILD. This anti-rattle hitch kit is constructed from steel and aluminum, and it comes with a clear coating for lasting corrosion resistance.
Check Stock

Anti Rattle Hitch Tightener Stabilizer No Sway for 2' and 1.25' Steel Heavy Duty Rust Free

  • [Compatibility] Hitch tightener can be used with 2" and 1.25" tow hitch receivers，including Curt, Rola, Yakima, Inno, Draw-Tite, Blue Ox, Hidden Hitch, Thule, Tulga, U-Haul and other brands. It is compatible with all hitch classes includes I, II, III, and IV (1, 2, 3 and 4), both 2” and 1.25” models, ideal for hitches on SUV’s, vans, trucks, RV’s, sedans and trailers..
  • [Material] Includes a heavy-duty U-bolt and thick powder coated plate that will last to all weather conditions and loads..
  • [Easy Installation] Convenient and easy to install! Simply slip the U-bolt over the receiver, slide the tightener plate into the bolt, and tighten into place. In just 3 easy steps and in less than 10 minutes..
  • [Safety] prevents from rattling, wobbling, rocking and hitch movement for cargo carriers, hitch racks, bike racks and trailer ball mount. Leading design of Tulga hitch tightener is the best anti rattle hitch tightener in the market..
  • [Warranty] Our heavy duty built hitch tightener is backed with 30 days money back guarantee and LIFETIME WARRANTY.
Check Stock

Hitch Tightener for 1.25' and 2' Hitches Hitch Tightener Anti-Rattle Stabilizer Rust-Free Heavy Duty Lock Down Easy Installation Quiet(with 5/8-Inch Pin Diameter Trailer Hitch Lock)

  • 1.Each order comes with One anti rattle hitch tightener and One Trailer Hitch Lock.
  • 2.Hitch Tightener: Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. Enjoy your quiet towing experience..
  • 3.Hitch Tightener: Great ideal for hitchs on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch).
  • 4.Hitch Tightener: The rubber coated U-Bolt and 0.31" thick black powder coated plate with anti-rattling stabilizer enables this to withstand all weather conditions and loads..
  • 5.Trailer Hitch Lock: trailer hitch lock is made of solid hardened steel, and is not easily broken or rusted. With a 5/8-inch diameter pin, our product fits most Class III & IV hitches with 2 inch receivers.Each lock cylinder is unique and protects your hitch from theft.2 keys are included..
Check Stock

RETRUE Hitch Tightener, Hitch Stabilizer Heavy Duty Anti-Rattle Clamp for 1.25" and 2" Hitches, Reduce Movement from Hitch Tray Cargo Carrier Bike Rack Trailer Ball Mount, Rust Free

  • Premium Quality. RETRUE hitch tightener equiped with heavy duty φ0.4" U-bolt and 0.28" thick black powder coated plate anti-rattle stabilizer, can undertake all weather condition, rust free..
  • Practical and Functional. Reduce rattle and movement for hitch tray, cargo carrier, bike rack, trailer ball mount with brands curt,highland, goplus, pro series, rola, yakima, thule, etc. Can help to decrease noise and give you a quiet world when towing..
  • Utility Use. This tow clamp is perfect for locking 1.25" and 2" hitches, compatible with most hitches classes I, II, III, and IV (1, 2, 3 and 4). Suitable for trailer truck SUV sedan RV camper van and minivan..
  • Hitch Tightener Installation. After insert the tube, lock them directly by U-bolt and plate, put on original spring washers, flat washers and fasten by nuts, then done. If the hitch is low, and there is a risk for U-Bolt to scrap ground, lock the tightener from the bottom..
  • From RETRUE your reliable partner, model HT001. If you encounter any problems, please feel free to contact us through the "Ask a Question&q....
Check Stock

WEIZE Hitch Bike Rack Wobble Free Smart Tilting Bicycle Car Racks for Standard Fat Tire and E-Bike 2-Bike 120 lbs Capacity 2-inch Receiver

  • ...structed with reinforced steel which makes it durable and powerful enough to carry 2 bikes weighing 60 lbs each. Besides, compare with roof rack, the hitch mount bike rack can save your cost of fuel up to 30% by reducing wind resistance..
  • ANTI-SCRATCH: The trailer hitch bike rack features foam-padded clamp and hitch tightener to prevent the bicycle from swaying and damaging your car's paintwork..
  • CONVENIENT: Our bicycle car rack is non-foldable, but the tilting function allows for access to the back of your vehicle even when loaded with bikes(NOT suitable for swing-out tailgate), the removable platform can be adjusted for 1 or 2 bikes carrying..
  • HIGH COMPATIBILITY: Fit 17-29 inch wheels, up to 63-1/3 inch wheelbase, up to 5 inch tires, 2 inch receiver, it is also equipped with safety strap, security hitch lock, hitch tightener and other necessary hardwares, please contact us if there are something missing, we will re-send it to you for free..
  • WARRANTY: 1-Year free-return gurantee for any product quality problems. WEIZE tow hitch bike rack aims for quality followed up with quality customer service directly provided by manufacturer. A satisfied solution will be given for ANY of your problems. Our support team is on standby for YOU..
Check Stock

WEIZE Hitch Bike Rack, Wobble Free Smart Tilting Folding Bicycle Car Racks for Standard, Fat Tire and Electric Bike, 2-Bike 120 lbs Capacity, 2-inch Receiver

  • ...t durable and powerful enough to carry 2 bikes weighing 60 lbs each. Besides, compare with roof rack, the hitch mount bike rack can save your cost of fuel up to 30% by reducing wind resistance..
  • ANTI-SCRATCH: The trailer hitch bike rack features foam-padded clamp and hitch tightener to prevent the bicycle from swaying and damaging your car's paintwork..
  • CONVENIENT DESIGN: Our bicycle car rack is versatile, the tilting function allows for access to the back of your vehicle even when loaded with bikes(NOT suitable for swing-out tailgate), the removable platform can be adjusted for 1 or 2 bikes carrying, the folding design also makes the rack to be folded up when not in use..
  • HIGH COMPATIBILITY: Fit 17-29 inch wheels, up to 63-1/3 inch wheelbase, up to 5 inch tires, 2 inch receiver, it is also equipped with safety strap, security hitch lock, hitch tightener and other necessary hardwares, please contact us if there are something missing, we will re-send it to you for free..
  • WARRANTY: 1-Year free-return gurantee for any product quality problems. WEIZE tow hitch bike rack aims for q....
Check Stock

WAVESRX Boat Trailer Hitch Tightener & Stabilizer | Stainless Steel Anti-Rattle Clamp for 2\ Hitch Receivers | Marine Grade, Rust-Free, Long-Lasting U-Bolt for Safe Transportation of Your Watercraft

  • ...ONDITIONS - Most hitch clamps out there are designed for universal use and perform poorly in harsh marine conditions that boat trailers are often subjected to. How often did you find yourself struggling to remove a steel nut that has been seized by salt and corrosion? We certainly had, so when we designed our hitch tightener for boat trailers, we used 316 Marine Grade Stainless Steel U-bolt, nuts and washers, to ensure Corrosion-Free & Rattle-Free Towing..
  • UNIVERSAL FIT AND EASY INSTALLATION - If your vehicle has a 1.25" (32 mm) or 2" (50 mm) hitch for towing a Boat or a Jet Ski, you can Quickly and Effectively secure it using our Premium Hitch Tightener Clamp. Just place the black tension plate on the bottom with the angled lip pointing up and away from your vehicle, insert the U-Bold from the top over the towing hitch and secure it from the bottom using the included washers and nuts (see product images for recommended installation position)..
  • FREE BUNDLED EXTRAS & BONUS FEATURES - When it comes to product value, we don't believe in cutting corners by eliminating essential features or components. That's why included in the box you'll find a Rubber Coated Stainless Steel U-Bolt (for complete weather and scratch protection), a Reinforced Bottom Plate (f....
Check Stock

TOPTOW Hitch Extender Fits for 2 inch Receiver 8.5 inch Extension Length Anti-Rattle Bolt with Hitch Pin Kit and Anti Rattle Stabilizer

  • ★Please check the product dimension before purchasing this part. Extender length (hole to hole): 8-1/2". Shank size: 2". Extender receiver size: 2"....
  • ANTI-RATTLE DEVICE: With seperate anti-rattle hitch tightener and bolt on 2 inch receiver, it can eliminate the hitch wobble at the junction of your....
  • HIGH STRENGTH: This 2 inch receiver tube is rated to tow up to 3500/350 lbs GTW/TW.
  • Package: Comes with hitch extender, 5/8" Hitch Pin and Clip and Blue Anti Rattle Hitch Clamp.
  • Black Powder Coating Finish, Enhanced Rust and Corrosion Resistance.
Check Stock

MYCAN Hitch Tightener Anti Rattle Hitch Stabilizer for 1.25 and 2 Hitches Locking 2 inch Receiver Trailer 304 Stainless Steel clamp Reduce Movement from Trailer Hitch Cargo Carrier Bike Rack

  • The plate of the hitch tightener is constructed from powder-coated steel. U bolt, flat washer, and lock washer of this locking hitch tightener were....
  • Hitch Stabilizer Universal Fit, compatible with almost all hitch brands and hitch classes I, II, III, and IV (1, 2, 3, and 4), as long as your....
  • The Anti-rattle hitch tightener is Widely Use: Ideal for cargo carriers, hitch receiver, trailer ball mounts, shackle hitch, tow hook, bike racks,....
  • This Hitch stabilizer is easy to install, lock the receiver tube by U-bolt and plate, put on flat washers, spring washers, and fasten with nuts.
  • MYCAN Hitch Stabilizer provides Quiet & Stable Experience, prevent and eliminate unwanted hitch movement, wobble, rattle, rocking, and noises, ensure....
Check Stock

Qualward Hitch Tightener Anti-Rattle Clamp, Heavy Duty Steel Stabilizer for 1.25 and 2 inch Hitches 304 Stainless Steel Towing Hitch Mounts,Anti-Rust Double Coating Protective

  • Eliminates Hitch Wobble & Rattle Noise: Anti-rattle hitch tightener was designed to completely eliminate hitch noise, wobble, rattle and hitch movement for cargo carriers, hitch receiver, trailer ball mounts, bike racks, hitch racks, etc. Enjoy your quiet towing experience..
  • Universal Compatibility: Great ideal for hitches on trucks, suv's, vans, RV's and trailers. Easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or larger hitch)..
  • Upgraded Material: Made from solid steel, it is a pretty good quality tightener with upgraded extra-thick U-bolt and plate. It is designed to reduce noise and keep things locked tight for however far you have to travel even in tough weather conditions. You can expect this to be really tough right out of the gate..
  • Package including: A heavy duty 304 stainless steel U-bolt and thick powder coated plate will never rust, spring lock washers and flat washers help to tightening it in place and secure..
  • Easy Installation: First and foremost, you are going to need the following tools: ¾” socket or wrench, U-bolt, tightener plate, washers, lock rings, and nuts. Then，drop the U-Bolt over the stinger and position the tightener plate onto the U-Bolt. Next, pla....
Check Stock