Categories

Best Hobby Parts

Bandai Hobby – Entry Nipper (Blue), Bandai Spirits Tools

  • Banday Hobby presents their official nipper, which is a necessary basic tool of every plastic model lover.
  • Thin, pointed blades ideal for removing delicate plastic parts from sprue.
  • These cutters are perfect for those just looking to get into the hobby.
  • Only product with affixed official Bluefin/ Bandai Namco label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance.
Check Stock

Bandai Hobby - Pokemon 06 Piplup, Bandai Spirits Hobby Pokemon ModelKit Quick!!

  • Bandai Hobby Quick!! - 06 Piplup [Pokémon], Bandai Spirits Hobby Pokémon Model Kit Quick!!.
  • Piplup pursues an astounding form through a fixed pose.
  • Comes with 12 parts and a set of foil stickers.
  • Only product with affixed official Bluefin label has been thoroughly tested for safety and meets all North American consumer product safety regulations and entitles the purchaser to product support assistance.
Check Stock

Valtcan Prime Sprue Cutter for Model Kits Thick Nipper

  • Flush Cut Diagonal Nippers: Cutting Pliers for thick plastic pieces and plastic trees. Remove plastic parts from trees. Leave 1mm between parts and....
  • Reliable Model Kit Nippers with spring - Cut your build time in half. Cut close to parts and cut nubs with minimal to no visible nub marks. Valtcan....
  • Sharp and Precise Cutting Hobby model Kit nippers: High quality Japan steel provide Straight smooth cuts without tearing..
  • Rubber handles provides you with secure grip and full control when cutting even the smallest and delicate model parts. Durable and lightweight....
  • Quick spring release to remove parts and Finish all your Gundam model kits in record time. Note* Pin on side helps to stop plier from over extending.....
Check Stock

52-646-300-0 Cylinder Dial Bore Gage 2“-6 Measuring Range .0005 Graduation 9.5 Measuring Depth with Carbide Anvils and Insulated Grip

  • Valuable Application -- Professional Cylinder Dial Bore Gage great for hobby machinists as well as mechanics, it is commonly used to measure many kind of automotive’s parts or cylinders and easily check for ovality or out of roundness. It can measure the interior diameter of a hole at any depth (within its reach), while internal micrometers can only measure to the depth of their contacts..
  • Technical Features -- Designed 2”-6” Measuring Range, 0.0005” Graduation, 9.5” Measuring Depth. Come with 2″ Contact Extension, 10 x Anvils (, 2.2", 2.4", 2.6", 2.8", 3", 3.2", 3.4", 3.6", 3.8", 4" ), 3 x different size Washers (0.1”, 0.05, 0.02”)Complete set -- The whole set include 1 x Dial Indicator, 1 x Chrome Plated Handle, 1 x Contact Extension, 3 x Washers, 10 x different size Anvils, all parts are collected in a fitted case.
Check Stock

Zettokete Sanding Sticks Fit for Gundam Model Craft Hobby,Carbon Fibre Sanding Rod Sanding Block,Ideal for Sanding and Polishing,3 Sizes(3\×0.6\

  • ...hing Needs】3 common sizes suitable for detailing polishing.The 0.6 inch width one suitable for large parts,plane large scale grinding.The 0.4 inch width one suitable for small parts,small-scale plane grinding.The 0.2 inch width one suitable for small parts,holes and narrow position..
  • 【Ideal Gift for Gunpla Model Hobby】Useful gunpla tools fit for gunpla model kits hobby.Good for all kinds of plastic model detailing polishing work.Suitable sizes for holding and easy to handle..
Check Stock

Max Factory Plastic Angel: Ange Figma Action Figure, Multicolor

  • From the popular column Shunya Yamashita's Plastic Angels.
  • Three face plates included for multiple expressions.
  • A hobby knife, paintbrush, desk and chair are included as optional parts.
  • Pug figure, giant airbrush, and alternate body parts without jacket on are also included.
Check Stock

Model Shipways Hobby Model Ship Tool Ropewalk Scale

  • Model Expo has been serving hobby enthusiasts with precision Models since 1976, and is a hobby tools Accessories manufacturer, distributor, and....
  • Make your own scale rigging for the perfect Ship Model! Put the master’s touch on your ship models with your own rope! The Ropewalk from Model....
  • No complicated mechanics, bobbins, rails or trucks. Our Ropewalk has only two main parts – the gear head and the tail end. It lays up (twists) any....
  • Best of all, you’ll have a great time experimenting with different cordages to see what you get. You can make larger diameter lines with your....
  • Also great for Western-motif kits such as stagecoaches or covered wagons & Civil War artillery. Illustrated assembly and operating instructions.
Check Stock

BANDAI SPIRITS HG Mobile Suit Gundam: Iron-Blooded Orphans Sigrun 1/144 Scale Color-Coded Plastic Model

  • From "Mobile Suit Gundam Iron-Blooded Orphans G" comes a game-original aircraft!.
  • No glue required for assembly, a hobby nipper is required to remove parts from runners.
  • Colored plastic, little to no paint required to replicate appearance, No requiere pegamento para el montaje, se requiere una pinza de hobby para quitar las piezas de los corredores.
  • Valkyrie Frame Three-dimensional Sigrun of the aircraft..
Check Stock

HAIBOXING 1:18 Scale RC Car 18868 36km/h High Speed 4X4 Off-Road Remote Control Truck, Waterproof Electric RC Cars All Terrain Toy Truck for Kid and Adults Two Batteries Supply 40 Mins Playtime

  • 【HOBBY GRADE OFF-ROAD CHASSIS】Engineered to a hobby grade rc, this truggy, referred to as a stadium truck, is different from 18859 rc monster truck in looks. This remote control car is built with front/rear independent suspensions, metal drive shafts, gear differentials, 9g 3-wire metal gear servo, and 16 ball gears throughout entire drivetrain. Easy to drive and it performs well on short grass, gravel and concrete roads..
  • 【POWERFUL & AMAZINGLY FAST】Driven by a 380 motor and powered by 7.4v 850mAh 25C soft pack Li-Po batteries, this rc truck speeds topping to 36KM/H. Chassis and suspensions are constructed with flexible PA materials, which protect rc trucks from collisions and bumps. Proportional steering and throttle control deliver stable acceleration and accurate steering performance. High/low speed switch on the remote for beginner practice..
  • 【 WATERPROOF ESC QUALITY PROTECTION】Full-function 2.4GHz radio control achieves a 280-feet-range control distance and allows many players to play at the same time without signal interference. Splash waterproof electronics allows 4WD rc cars to run through puddles or in a rainy day. The superb and durable electronics technically embody anti-block prevention, over-current and overheat protection, and....
Check Stock

Model Shipways Dapper Tom 1815 Baltimore Clipper Solid Hull 5 32 Scale MS2003 - Model Expo Regular $219.99

  • The Dapper Tom, an 8-gun topsail schooner, is to great extent, typical of Baltimore Privateers during a time when ships were at the mercy of any....
  • Historically accurate and perfectly scaled. Machine carved basswood hull reduces building time..
  • Eight cast metal cannon replicate the original 9-pounders. Fittings are now cast from lead-free Brittania metal and some laser-cut wood parts added..
  • Made in the USA. Model Expo is an American manufacturer serving hobby enthusiasts with precision models since 1976 and is a hobby tools manufacturer,....
  • Detailed plans and clear assembly instructions. Includes full size actual blueprint. Model Shipways' kits are the most authentic representation....
Check Stock

33Pcs Gundam Model Tool Kit Gunpla Tools Set Modeler Basic Tool Craft Set Hobby Building Tools Kit Bandai Models Tool Kits for Minature Gundam Car Airplane Ship

  • ✔ MUlTIPURPOSE APPLICATION: The Gundam model tools kit is suitable for a gundam starter and advanced modeler as well. You can use it to building toys, cars, robots, cartoon, ship, airplane and hobby model..
  • ✔ DURABLE: All the gunpla tools are well-made and high-quality. The cutting mat with holes, has long lifespan. Precision hobby knife with fine point blade for exact cuts. Lightweight aluminum handle is easy to maneuver. Safety cap for storage and portability. The tweezers are made of stainless steel, anti-static, anti-acid, anti-corrosion and anti-magnetic. Other items also have good quality..
  • ✔ FULL RANGE & COST EFFICIENT: This gundam tool kit includes all the tools you need. There are: 1 x cutting mat, 1 x Hobby Knife with 5 x spare blade, 1 x grinder with grinder polishing head, 1 x cutting pliers, 2 x tweezers, 2 x screwdriver, 3 x files, 1 x steel ruler, 1 x small knife, 4 x sanding paper, 4 x double-sided polished bar, 1 x yellow parts separator, 1 x polishing cloth..
  • ✔ LIGHTWEIGHT & PORTABLE: Our gundam craft set is packed by a durable plastic box or a bag. It is good for you to store and carry. Looking forward to your masterpieces..
  • ✔ GREAT GIFTS: It is no doubt that this hobby model tool set is a great gift for a gundam fan. And if ....
Check Stock

2 Sets Mini Hobby Saw Blades Tools Include 1 Set Mini Hand Hobby Saw Model Tools and 1 Set Precision Cutter Craft Kit Modelling Knife DIY Razor Saw Set for Architecture Modeling, Scrapbooking

  • Easy to install: to use our mini hand hobby saw model tools, you just need to loose the silver handle and insert the desired blade into the space, then screw it back into the handle.
  • To use our precision cutter craft kit, you just need to twist the silver part slightly and insert the blade.
  • Quality material: they are made of metal and plastic, safe and durable.
  • Mini hand hobby saw model tools feature stainless steel fixed interfaces to make the blades solid.
  • In addition, they are comfortable for hand operation with non-slip rubber rings and the handle has a reinforced set screw.
  • Precision cutter craft kit has independent plastic box packaging.
  • A nice hand tool kit to cut tree limbs and branches, for artists, architects, graphic designers, hobbyists and modelers.
  • Coming with blades: mini hand hobby saw model tools come with 1 piece penholder, 1 piece pen cap and 3 different blades for use on various types of materials.
  • Precision cutter craft kit comes with 3 penholders and 13 knives.
  • Enough quantity and various types of blades can meet your different needs and replacement.
  • Wide range of uses: the model saw blade is a practical and safe household tool, suitable for novices and skilled users, widely applied for pruning, carving, cutting branches and so on.
Check Stock

Jetmore 120-PACK Exacto Knife Blades, #11 Precision Replacement Craft Hobby Knife Blades for Art, Craft, Scrapbooking, Cutting, Carving

  • [WIDE APPLICATION]: Exacto knife blades ideal for cutting thin wood, scrapbooking, cardboard, paper, plastic, cloth, leather and foam board craft to meet your different needs..
  • [HIGH QUALITY]: SK5 alloy steel hobby knife blades, extra-thick, premium steel blades. No-rust, exquisite workmanship, processed by multiple processes, sturdy and durable, not easy to chip..
  • [120-PACK #11 BLADES]: Value 120-PACK reliable and sharp spare blades, you can create with confidence and don't have to worry about the blades running out quickly..
  • [SMOOTH CUTTING]: 25-degree blade angle, straight-pointed blade carving is smoother and more detailed, more in line with the cutting of paper models and small parts..
  • [UNIVERSAL BLADES]: Jetmore hobby knife blades fit in all fine #11 craft knives. Replaceable blades, long service life of the craft knife..
Check Stock