Categories

Best Hole Cutter Tool

100 pc Brass Grommet 1/2\ ID Set

  • Complete with tool and rustproof brass grommets for replacement or repairs in canvas or plastic. Instructions included.
  • 24 per package,an inside diameter of approximately 5/16-inch.
  • Tools with kit: Cutting Block, Hole Cutter, Inserting Punch and Die.
  • A handy, compact, economical kit complete with tools and 48 rustproof brass grommets for immediate replacements or repairs in canvas or plastic.
Check Stock

Spot Weld Cutter Set Double Sided 14 Pcs,3/8" HSS Spot Weld Cutter Remover Drill Bits Hex Sheet Metal Hole Cutter Remover Kit for Power Drill Spot Welding, by NAKAO

  • ... ◆【Easy separation】 The spot welding cutting machine drill bit can easily separate the spot welding plate without distorting the metal plate. Separate spot welding of sheet metal, panels, etc., and cut out small inspection holes. Also known as: spot weld drill bit, spot weld bit, spot weld cutter drill bit, spot weld drill cutter, spotweld drill bits, spot weld cutter, Rotary Spot Weld Cutter Sets Double Sided, Power Drill Spot Welding.
  • ◆【Package Include】：1 x Drill with Cutter,2 x Pilot Pin.,11 x Extra 3/8" cutters. Also known as: Remover Drill Bits Hex Sheet Metal Hole Cutter Remover, Punch Remover Panel Separator, Spot Weld Cutter Set, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool, Metal Hole Cutter Remover.
  • ◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more information!We will solve it for you in the first time!.
Check Stock

General Tools 1/2\ Grommet Tool Kit - 12 Solid Brass Grommets for Tarps Repair, Fabric Rings, Reinforcing Canvases, & Canopies

  • CANVAS REPAIR KIT: This versatile set is used to reinforce holes and prevent tearing materials, including canvas, leather, fabric, and vinyl. Instead of replacing your possessions, repair your tarp, flag, awning, and pool or boat covers..
  • PROFESSIONAL GROMMET KIT: Our easy-to-use set includes a hole cutter, single hardwood backer block, hardened mandrel, anvil, setting tool, and 12-1/2" brass grommets. They are solid and will never rust.
  • enjoy years of durability and performance..
  • TARP RINGS: The anvil and setting tool are coded with lines for each size grommet, allowing you to quickly choose which eyelets you need for your project. For added comfort and safety, the appliance features a knurled body..
  • EYELET SETTING TOOL: Choose your cloth, put the block under your item, and center the hole cutter where you're installing the grommet. Hammer to punch the hole and install. Place the grommet on the mandrel, beat it evenly, and complete your project..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock

General Tools 3/8\-1/2\ Grommet Kit - Rustproof Solid Brass Grommets for Tarp Repair, Reinforcing Canvases, and Fabric Rings

  • PROFESSIONAL GROMMET KIT: Easy-to-use set includes a hole cutter, single hardwood backer block, double-sided anvil, 2 hole punches and punch heads, 6-1/2" and 6-3/8" brass grommets. Enjoy years of durability and performance with our rustproof gear..
  • CANVAS REPAIR KIT: These heavy-duty tools reinforce holes and prevent tearing materials, including canvas, leather, fabric, and vinyl. Instead of replacing your possessions, repair your tarp, flag, awning, and pool or boat covers..
  • TARP RINGS: The anvil and setting tool are coded with lines for each size grommet, allowing you to quickly choose which eyelets you need for your project. For added comfort and safety, the appliance features a knurled body..
  • EYELET SETTING TOOL: Choose your cloth, put the block under your item, and center the hole cutter where you're installing the grommet. Hammer to punch the hole and install. Place the eyelet on the mandrel, beat it evenly, and complete your project..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

WICHEMI Annular Cutter Set 3/4 Inch Weldon Shank 2 Cutting Depth and Cutting Diameter from 7/16 to 1-1/16 for Magnetic Drill Press HSS Standard Kit Two Flat with 2 Pilot Pins

  • ✔️ TWO FLATS FOR CUTTER MOUNTING — This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems. The Original Mag Drill Annular Cutter From Which All Others Are Measured..
  • ✔️ GROUNDED & FULLY FLUTED — Provides better chip evacuation, requires less HP and offers better performance in deeper holes..
  • ✔️ O.D. MARGINS — Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish..
  • ✔️ PATENTED HOUGEN-EDGE GEOMETRY — Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles..
  • ✔️ I.D. TAPER — Relief area between slug and cutter. Reduces horsepower and improves slug ejection..
Check Stock

General Tools 1/2\ Grommet Tool Kit - 12 Solid Brass Grommets for Tarps Repair & 1261-4 1/2-Inch Grommet Refill, 2 Packs of 12 Sets, 24 Complete Grommet Sets

  • Product 1: CANVAS REPAIR KIT: This versatile set is used to reinforce holes and prevent tearing materials, including canvas, leather, fabric, and vinyl. Instead of replacing your possessions, repair your tarp, flag, awning, and pool or boat covers..
  • Product 1: PROFESSIONAL GROMMET KIT: Our easy-to-use set includes a hole cutter, single hardwood backer block, hardened mandrel, anvil, setting tool, and 12-1/2" brass grommets. They are solid and will never rust.
  • enjoy years of durability and performance..
  • Product 1: TARP RINGS: The anvil and setting tool are coded with lines for each size grommet, allowing you to quickly choose which eyelets you need for your project. For added comfort and safety, the appliance features a knurled body..
  • Product 1: EYELET SETTING TOOL: Choose your cloth, put the block under your item, and center the hole cutter where you're installing the grommet. Hammer to punch the hole and install. Place the grommet on the mandrel, beat it evenly, and complete your project..
  • Product 2: For use with General's 1/2" grommet kits.
Check Stock

CenPro 29A-008 - Pizza Dough Box - 4.5 Gallon Capacity

  • Professional dough proofing box, home baking accessory – complete with dough cutter and scraper tool.
  • Multipurpose – use for bread dough, pizza crust, marinating meats, storing vegetables, entertaining, parties.
  • Ideal size – 13” x 9” x 3” – universally fits on most home refrigerator shelves, fits 4-6 dough balls comfortably.
  • Leak-proof, airtight lid with convenient handle – won’t let moisture escape, important for fermentation process.
  • Dough scraper and cutter tool included, premium baking accessory, anti-slip, hanging hole, durable and handy.
Check Stock

Chamfer End Mill 3 Flute Chamfering Router Bit 90° Tungsten Steel CNC Polishing Carving Tool for Small Cutting Amount(D3*90°*50L)

  • 3 FLUTES: The chamfering knife is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
  • ONE-PIECE DESIGN: The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • EASY TO USE: The milling cutter bit dopts professional chamfer design, which can polish and engrave the workpiece without unloading..
  • STANDARD SIZE: The end mill chamfer bit has standard size and can be used as an aluminum‑copper milling cutter tool and an engraving milling cutter head..
  • APPLICATION: The chamfering tool is compact design, easy to carry and store, mainly used for 90° chamfering or taper hole processing on the workpiece..
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

Generic Double Sided Diamond Whetstone/Blade Sharpening Stone 400 1000 Grits

  • Has double sided , provide perfect grinding by using the 400 Grit as coarse honing before the 1000 Grit as fine grinding..
  • The small ceramic rod in the middle of handle is available for grinding.
  • Tungsten steel pieces ceramic pieces the handle offer sharpening/ polishing for ..
  • Sharpens any cutter such as bread cutter, fruit cutter, cutter, best choice for chef, home using tools honing..
  • handle ensure comfortable and firm gripping during grinding, provided with the hanging hole for easy placing or storing..
  • Multifuntional, provide efficient and convenient sharpening/ polishing of and , be a multifunctional accessory tool for ..
Check Stock