Categories

Best Hollow Wall Mounting Bolt

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

TOGGLER SNAPTOGGLE BDS Toggle Anchor 304 Stainless Steel Channel Made in US,3/8 to 2-1/2 Grip Range For 1/2 -13 UNC Fastener Size Pack of 25

  • Toggle anchor installs behind 3/8"- to 2-1/2"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/2"-13 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 275 lb. in 1/2" drywall with a 1/2"-13 UNC bolt, and 2,038 lb. (material failure) in concrete block with a 1/2"-13 UNC hardened bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Glarks Heavy Duty Gun Wall Anchor Metal Setting Tool with Molly Bolt Hollow Drive Wall Anchor Screws Assortment Kit for Cavity Anchor Plasterboard Fixing

  • ☛ Product Type: High quality heavy duty gun with molly bolt hollow wall anchor screws assortment kit..
  • ☛ Package: In this kit, it include a heavy duty gun with 5 size of 4x32mm, 4x60mm, 5x52mm, 5x65mm, 6x52mm total 18pcs molly bolt packed in a durable box, convenient for your use and storage..
  • ☛ Meterial: The gun is made of solid metal with non-slip rubber grips and slip guard. molly bolts are made of high quality zinc plated carbon steel, rust resistance and corrosion resistance, durable enough for you to hanging items..
  • ☛ Feature: Heavy-duty gun used for setting cavity wall fixings into hollow stud walls accurately and quickly, hollow drive wall anchor expansion when installing, providing strong bearing capacity and safety..
  • ☛ Application: Perfect for cavity anchor plasterboard fixing, widely used in drywall, hollow block, plaster, tile, perfect for hanging curtain rods, lamps, photo frames, coat racks, power switches..
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

TCH Hardware 10 Pack Toggle Bolt 3/16' x 2' + 4' Slotted Drive Screws - Drywall Sheet Rock Anchor Hollow Wall Butterfly Spring Loaded Wing

  • Steel slotted drive machine screw - 10-24 x 4".
  • Perfect for mounting on drywall and hollow walls.
  • Wings lock into place behind wall for superior holding power..
Check Stock

TOGGLER SNAPTOGGLE BAS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BBS Toggle Anchor 304 Stainless Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 3/16"-24 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range for 1/4 -20 UNC Fastener Size Pack of 100

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 50

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately).
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 3/16 -24 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 3/16"-24 UNC-threaded bolts.
  • Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

TOGGLER SNAPTOGGLE BB Toggle Anchor with Bolts Zinc-Plated Steel Channel Made in US 3/8 to 3-5/8 Grip Range For 1/4 -20 UNC Fastener Size Pack of 10

  • Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting material.
  • Anchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes.
  • Made in USA, and includes 1/4"-20 UNC-threaded bolts.
  • Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

CondoMounts Tile/Granite/Marble Mounting Kit for Grab Bars, Hand Rails, Towel Hanger, TVs. Mount Without Studs | Diamond Drill Bit with 4 x 90lbs Wall Anchors

  • No Stud Required Mounting - No stud? No problem! The CondoMounts Complete tile Mounting Kit Can support up to 90lbs on drywall making it the strongest hollow wall anchor available in the market. Now you can complete your DIY projects with confidence and ease!.
  • The Complete Kit – Save multiple trips to the hardware store! Our Complete Tile/Marble/Granite Wall Mounting Kit includes One 1/2" diamond drill bit, 4 pieces of 90lbs hollow wall toggle anchors, 4 pieces of ¼-20 x 2’’ Stainless Steel screws, and 4 individual ¼’’ washers. A Screw length of 2" is provided catering to most wall types..
  • Other Mounting Uses – The CondoMounts Tile Mounting Kit can also be used for other home applications including Mounting Sinks, Cabinets, Bathroom Accessories, Grab Bars, Vanities, Draperies, Curtain Rods, Blinds, Mirrors and so much more!.
  • Mount On Almost Any Surface - The 4 elephant anchors provided can be used to mount almost anything to many different types of material. The tiles will have different types of backings, These include Gypsum board, Drywall, Tile, granite, marble over drywall/cement board, Plasterbo....
Check Stock