Categories

Best Horizontal Check Valve

Stainless Steel SS316 NPT 2 Swing Check Valve WOG 200 PSI PN16 CF8M

  • Body Material:Stainless Steel 316,200PSI/PN16,ANSI B1.20.1.
  • Working Pressure 200 WOG,Port Types:Female x Female threaded.
  • Temperature range: -60 to 450 degree Fahrenheit,Suitable for full range of liquids and gas.
  • Check valves are used to help direct flow in one direction. The stainless steel bodies and PTFE seals are highly corrosion resistant allowing these check valves to be used with a wide variety of fluids including, but not limited to water, oil, gas, air, light alkali's, acids, biodiesel, fuels and alcohols..
  • Swing check valves are for horizontal use only. When fluid pushes on the stopper in the correct direction, it will "swing" open to allow flow. If flow moves in the opposite direction, it will swing shut. The check valve cannot be used in vertical applications as gravity may affect the function of the swinging motion..
Check Stock

Watkins Replacement Water Check Valve for Hot Springs Spa, 3/4" - 35233

  • This 3/4″ water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the back flow of water through the circulation pump once the jet pump is activated.
  • Works on Tiger River Spas, Hot Spring Spas, and Limelight Spas..
  • All water check valves have arrows stamped on the outside to indicate the direction of flow which should be pointer towards the circulation pump..
  • Troubling Shooting: The symptoms of a non-operative check valve are.
  • * Water Leak – If water is leaking from around the check valve, it should be replaced. * Rattling – A rattling check valve indicates that water is not being allowed to flow properly past/ through the check valve. * Verify the check valve is installed with the flow in the correct direction. * Heater High-Limit Tripping – Poor water flow through the check valve could lead to heater high-limit tripping. Ensure the check valve is n.
Check Stock

PVC True Union Check Valve 1’’ Slip Swing Full Port Utility Check Valve Sch80 Socket Pool Ball Check Valve for Backflow Prevention

  • 【PVC Ball Check Valve】Schedule 80 PVC ball check valves have a spherical ball inside the valve body which works as a check to allow flow in one direction and close off to prevent back-flow..
  • 【INSTALLATION TIP】PVC union check valves are designed for VERTICAL installations, MUST be used in an upflow position to work properly. Check valves MUST be installed with the valve's flow arrow pointing in the direction of the flow. Do not install valve upside down.（NOTE: NO SPRING).
  • 【PVC Union Check Valve】True union check valve, can be taken apart for cleaning, allows for easy removal without breaking down the piping connection..
  • 【Material】1'' Slip check valve made of PVC material, O-ring with EPDM material, low-temperature-resistant, impact-resistance, ultraviolet-resistance, rust-resistance. Fits for Schedule 80 1 Inch Pipe..
  • 【Application】PVC Swing Check Valve 1’’(DN25) - Non-return or "one way" valve is ideal for flow control, such as commercial plumbing, aquariums, irrigation, swimming pools, water parks and OEM applications..
Check Stock

PumpSpy Silent Sewage or Sump Pump Check Valve 2-Inch Check Valve Stainless Clamps Fit 7-1/4 Gap in 2-Inch Schedule 40 PVC Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Increase

  • QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
  • CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 2" Schedule 40 pipe. Fits within a 7-1/4" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped contents within the discharge pipe from falling back into the sump basin. A fully functional check valve can increase pump life expectancy by preventing contents from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevent costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working properly..
Check Stock

PumpSpy Silent Sump Pump Check Valve - 1-1/2 with Buna-N Couplings Model CV-150 Spring-Loaded Flapper Quiet Check Valve Sump Pump Life Expectancy Increase Includes Steel Clamps Fit 1-1/2″ Pipe

  • QUIET OPERATION: Our sump pump check valve has a unique spring-loaded flapper that helps eliminate the water hammer noise that standard check valves produce. The water hammer noise occurs when the discharged water slams the check valve flapper down. This silent check valve can bring a quiet operation to your sump pump..
  • CLEAR VALVE BODY: This check valve will provide visibility to water movement. With the valve's clear body, it's easy to visually confirm that pumped contents are moving, the pipes are not clogged, and the pump in the basin is fully operational..
  • INCLUSIONS: Our silent sump pump check valve comes with stainless steel clamps and Buna-N rubber couplings for quick installation. The clamps and couplings fit a 1-1/2" Schedule 40 pipe. Fits within a 5-1/8" gap..
  • KEEP WATER OUT: This check valve is designed to keep pumped water within the discharge pipe from falling back into the sump basin. A fully functional sump pump check valve can increase pump life expectancy by preventing water from being pumped twice..
  • ABOUT US: PumpSpy provides sump pump systems that help eliminate the unknowns of a sump outage and prevents costly damage. We also offer Smart Sump Pump Systems that automatically track incoming data and check that a sump pump is working pr....
Check Stock

Tektall 2 Pack 10mm 3/8" Aluminum Alloy Non-Return One Way Check Valve for Fuel Line Oil Petrol Diesel,with 4Pcs Universal Adjustable Hose Clamps.

  • 【What is Fuel Non Return One Way Check Valve?】 The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel from returning back to the tank and keeps it in the line.So this one way valve can perfectly solve your vehicle's hard or slow startup issues..
  • 【Good Quality】 Tektall non return check valve is made of high-quality aluminum alloy, the life is longer than plastic oil valve, and this check valve is more durable and corrosion-resistant strong..
  • 【Easy to Replace】 According to the little arrow on the valve, connect the fuel line.Then using the hose clapms and screwdriver to ensure the pipes don't drop off and keep tightly. This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient..
  • 【Wide Applications】 This one-way check valve is installed in many low pressure fuel systems / diesel / Carburetors and bio fuel systems where fuel to only flow one way, suitable for petrol, diesel, water, oil. It universal can be used on any UTV, quad, dirtbike, jetski, waverunner, boat, truck, car, motorcycle, tractor, camper, lawn mower, blower, pressure washer, etc..
  • 【Working parameters】 The minimum upstre....
Check Stock

Hydro Master Plastic Sump Pump Check Valve with Stainless Steel Clamps for 1-1/2 inch or 1-1/4 inch

  • 1-1/2" or 1-1/4" Slip-on check valve for most sump pumps.
  • Made of strong ABS body and EPDM rubber on both ends to prolong service life.
  • Stainless steel 301 clamps and fasteners for corrasion and rust resistance.
  • Can be installed vertical or horizontal, but vertical would be best.
Check Stock

3600 PSI Power Pressure Washer Water Pump 2.5 GPM 3/4 Shaft for Honda GX200

  • The ROP Shop replacement Horizontal Triplex Pressure Washer Pump.
  • Specs - Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM. Maximum HP: 6.5 HP, Male Outlet: 22mm Threaded, Standard....
  • Includes - (1) Horizontal Triplex Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Oil Reader.
  • This pump mounts horizontal and MUST have the oil dip stick pointing up when mounted. Pump needs at least 6.5HP to handle PSI. Pump head CANNOT be....
  • Replaces most pumps with 3/4" shaft. The 4-bolt mounting pattern is 2 9/16" center to center.
Check Stock

GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7

  • 【Versatile】This 3-Port Brass Female Threaded Air Compressor Check Valve excellent replacement for the old or broken check valve of your air compressor.
  • 【Easy to install】Easy to install with the thread connecting ends, the three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump.
  • 【Package Content】 1 x Air Compressor Check Valve.
  • 10mm Female Thread Tube Connector Air Compressor Check Valve, Male Thread : 16mm Hex Head Size : 18mm.
  • 【After-sale Service】Each Compressor Check Valve is quality checked, we provide 30-day money back service or exchange for customers, just feel Free to contact us if you have any problem with the product, we will solve for you within 12 Hours.
Check Stock

Aquarium CO2 Check Valve, Stainless Steel Needle Check Valve Bubble Counter Aquariums System CO2 Regulator Fish Tank Accessory(Single Head Micro metering Valve Bubble Counter)

  • Stainless Steel Needle Micro-metering Valve—This aquarium CO2 check valve adopts high quality stainless steel needle micro-metering valve with high precision, that is easy to release CO2 by fine tuning..
  • Different Styles to Choose—This aquarium CO2 check valve provide many different styles for you to choose, can meeting your different demands..
  • Qualitative Materials—This aquarium CO2 check valve is made of high grade stainless steel material, which is anti-corrosion, abrasion resistant, glossy and durable..
  • Ergonomically Design—This aquarium CO2 check valve adopts ergonomically design, special metal-grinded surface, that is easy to operate..
  • Easy to Install & Remove—This aquarium CO2 check valve adopts simple design, which is easy to install and convenient to remove..
Check Stock

Junniu Automatic Livestock Water Bowl Heated Waterer Trough Water Dispenser for Livestock Animals Cattle Pig Cow Goat Sheep Pet Dog, Plastic Outdoors

  • ... attach this waterer to the wall and it will not take large space..
  • 【Automatic Water Supply】Automatic water bowl can automatically replenish and cut off water through the float valve. The plastic float valve is light in weight and can accurately sense changes in the water level. When the water level rises to the horizontal line, the water source is cut off, and when the water level drops, water is added in time..
Check Stock

GE WD24X10018 Check Valve Dishwasher

  • The GE Appliances Check Valve Piston is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • GE Appliances Check Valve Piston prevents water in the drain hose from flowing back into the tub.
  • GE Appliances WD24X10018 fits inside the check valve body.
  • The high quality GE Appliances Check Valve Piston is also called the Piston & Nut Assembly and is common on GE and Hotpoint Dishwashers.
  • Repair your appliance with confidence when you choose factory certified GE Appliances Parts & Accessories.
Check Stock

Check Valve 3/8 Inch 10 mm ABS Plug-in Check Valve Fuel Oil Water Gas Air One-Way Check Valve for Liquids and Gases 6 Pieces

  • Material: this check valve is made of ABS plastic, and the internal valve core is made of silicone, ABS plastic has high hardness, good heat resistance and corrosion resistance, strong resistance to acids and alkalis, and is resistant to organic solvents to some extent.
  • Suitable size: you will get 6 no-return check valves with a size of 3/8 inch, which is 1.61 inches long, enough quantity to meet your use of check valves in different situations to prevent fluid backflow.
  • Function introduction: 3/8 check valve is applied in fluid system to prevent fluid backflow, or applied in pneumatic system to prevent compressed air backflow.
  • This check valve can be applied in the temperature range of -20 degrees Celsius to 70 degrees Celsius.
  • Widely use: one-way valve can be applied in water process, air purification, automobile parts, machinery industry, household appliances, etc., to effectively prevent backflow of the medium.
  • Note: when installing the check valve, pay special attention to the flow direction of the medium.
  • The normal flow direction of the medium should be consistent with the arrow direction indicated on the valve body, otherwise the normal flow of the medium will be cut off.
Check Stock