Categories

Best Horizontal Turning Machine

5 LBS Aluminum Horizontal Sausage Stuffer Machine, Manual Sausage Maker Kit With Suction Base & 4 Filling Nozzles For Homemade1

  • 【YOUR HEALTHY IS PRIORITY】This MASTER FENG sausage stuffer is upgrated with a food safe silicone piston which is not only healthy but also ensure a better sealing..
  • 【5 LBS CAPACITY & 4 NOZZLES】This Sausage Making Kit has a capacity of 5 LBS, and it comes with 4 sizes of sausage stuffing tubes 25mm, 22mm, 19mm, 15mm and you can make 4 different sizes of sausages, hotdogs, salamies and more..
  • 【HORIZONTAL FOR EASY USE】The solid suction base design to ensure the machine stable during your sausage filling. And the horizontal type is much more labor-saving and easy to press sausage meat out of the cylinder..
  • 【WATER WASHING RECOMMENDED 】You can remove all the turning parts and the stuffing funnel of the sausage machine after use. Washing the meat stuffer with hot water and then dry it. Keep it far away from your kids!.
  • 【MORE FUN IN KITCHEN 】 Now you can making fresh sausages with your favourite recipes and enjoy it with your family and friends, just buy this sausage stuffer to your kitchen gadget collection to have more fun in your kitchen..
Check Stock

Fowler 52-720-000-0 Surface Finish Comparator Set 30 Specimens

  • SURFACE FINISH SPECIMENS: This surface roughness specimen set is ideal for checking, identifying, and specifying the degree of roughness of machine parts.
  • features 30 different specimens for flat lapping, reaming, grinding, turning, horizontal and vertical milling.
  • DIMENSIONS: The surface roughness specimens feature grade AA values displayed in microinch and micron values accurate to within ±12% of the nominal values.
  • each of the 30 specimens made of electro-formed solid nickel is 0.875" by 0.375" in size.
  • EASY COMPARISON: Each type of surface finish is accurately and consistently reproduced to give the operator a realistic idea of the feel, appearance, and texture of the machined components.
  • they can be easily compared with a loupe or by utilizing the scratch test.
  • COST-EFFECTIVE CHECKING: Eliminates costly checking methods, saves time, reduces the production of scrap caused by poor finishes.
  • SET INCLUDES: This roughness specimen set includes a vinyl wallet and instructions.
Check Stock

GARDENBEAUT S1 Wood Chipper Shredder Mulcher 7 HP 212cc Heavy Duty Engine Gas Powered 3 inch Max Wood Diameter Capacity 20:1 Reduction Ratio 1-Year Warranty After Product Registration

  • Wood Chipper Shredder has a 11.8 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and branch's leaves into mulches..
  • Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees.
  • Powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem.
  • Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity.
  • Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED).
  • Can be used to aid in fire prevention and building firebreaks.
  • Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks.
  • DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines.
Check Stock

Rotary Welding Positioner Turntable Table, Welding Positioning Turntable Jaw Lathe Chuck Equipment Adjust Speed 0-90º 110V

  • 【Smooth Rotation】This Rotary Welding Positioner is driven by 15W High-quality DC motor, rotate smoothly & stable.
  • Rotating speed: 2-10 r/min. Using foot switch control table rotation, easy to control rotation..
  • 【High-quality DC Motor】High-quality DC motor, the worktable running smoothly, welding speed can be stepless regulation, large adjustment range, high adjustment precision..
  • 【0-90º Tiltable Table】0-90º table turning angle tiltable of welding positioner, can fix it at any angle with tilt lock wrenches. Clamp and worktable choose simple mechanical connection way, high positioning accuracy..
  • 【Function】BY series Light Positioner is mainly used for welding of annular weld. The main function of the machine is to tilt, turn the workpiece, so that the weld in the horizontal, ship-shape, such as the best position to apply welding..
  • 【Wide Application】For working table or specific tooling for clamping workpiece with manual welding,welding operation machine to achieve automatic welding, and for cutting, grinding, assembly, testing and other processes. Especially suitable for under 10KG flange, steel pipe and other seam welding..
Check Stock

EFCUT C30 Mini Wood Chipper Shredder Mulcher, 7 HP 212cc Gasoline Engine, 3\ Max Wood Diameter, 15:1 Waste Reduction Ratio, 1-Year Warranty After Product Registration

  • 003cp003eEFCUT C30 MINI Wood Chipper Shredder has a 11.8 inch cutting rotor with 2 blades + 4 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and branch's leaves into mulches.003c/p003e.
  • 003cp003eEFCUT C30 MINI Wood Chipper Shredder is easy to assemble, also easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 15:1003c/p003e.
  • 003cp003eEFCUT C30 MINI Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity003c/p003e.
  • 003cp003eEFCUT C30 MINI Wood Chipper Shredder has a unique designed check windows for faster replacement of blades, making your gardening work more efficient.003c/p003e.
  • 003cp003eEFCUT C30 MINI Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder. 1-Year Warranty After Product Registration against machine construction(except blades etc. consumables)003c/p003e.
Check Stock

Sirio SD 27 Dipole CB/10 Meter Base Antenna

  • Base station antenna Factory tuned at mid-band High power handling capability Whip equipped whit waterproof jointing sleeve Made of aluminium alloy....
  • ype: Dipole Frequency range: 26-28 MHz Radiation (H-plane): Horizontal mounting: Directional Vertical mounting: Omnidirectional Gain: 0 dBd, 2.15 dBi....
  • SWR @ res. freq.: ≤ 1.1 Max. power: 1000 Watts (CW) continuous 3000 Watts (CW) short time Feed system / position: Gamma match / center Connector:....
  • Materials: Aluminium, Steel, Nylon Wind load / resistance: 80 N at 150 Km/h / 130 Km/h Wind surface: 0.07 m² Length (approx.): 5420 mm.
  • Turning radius (approx.): 3050 mm for horizontal polarization Weight (approx.): 2560 gr Mounting mast: Ø 35-50 mm.
Check Stock

EFCUT C30 Wood Chipper Shredder Mulcher 7 HP 212cc Heavy Duty Engine Gas Powered 3 inch Max Wood Diameter Capacity 20:1 Reduction Ratio 1-Year Warranty After Product Registration

  • 003cp003eEFCUT C30 Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves on branches into mulches.003c/p003e.
  • 003cp003eEFCUT C30 Wood Chipper Shredder is easy to assemble, also easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 20:1003c/p003e.
  • 003cp003eEFCUT C30 Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity003c/p003e.
  • 003cp003eEFCUT C30 Wood Chipper Shredder has two unique designed check windows, the front one for faster replacement of blades and the back one for easier clearing blockage of debris, making your gardening work more efficient.003c/p003e.
  • 003cp003eEFCUT C30 Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder.1-Year Warranty After Product Registration against machine construction(except blades etc. consumables)003c/p003e.
Check Stock

Biltek 54

  • Brand New Cordless Vinyl Horizontal Venetian Style Blinds.
  • No Cords to Tangle! Child & Pet Safe! The Durable Construction Resists Warping, Fading and Sagging.
  • Plastic tilt wand makes slats 180 degree turning to control light, block Sunrays and provide privacy.
  • Hold down brackets and mounting hardware for installation are included.
Check Stock

Shars 8\ Master Precision Level in Fitted Box for Machinist Tool 303-9501 S}

  • Horizontal level is easily adjusted by turning a set screw located on the top surface.
Check Stock

Yescom HVLP Spray Gun Electric 1.0mm Nozzles Air Paint Sprayer DIY Home Fence Auto Car Outdoor Projects 1000ml Cup

  • ...tos, furniture, instruments, woodworking, etc.
  • [Adjustable Air Volume & 3 Spray Patterns]: With air volume adjustment to control air value, turning clockwise to decrease & turning counter-clockwise to increase.
  • With 3 modes of different shapes, setting to vertical, horizontal and circular spraying to meet your needs, easy to adjust by turning the air cap.
  • [Powerful Motor]: With 450w high power & 27800rpm speed motor makes it easy to operate and leads to perfect spraying effects, achieving a smooth finish without overspray & coating waste.
  • [Durability]: 1000ml anti-corrosion aluminum container allows you to use it for a long time without adding paint frequently and ensures a long lifespan.
  • CE, GS, ETL certification to ensure quality and safety.
  • [Detachable & Convenient]: Detachable design allows to remove the container & air cap for easy cleaning.
  • Comes with a shoulder strap for convenient carrying and operation, reducing burden on hands.
Check Stock

Mophorn 50KG Rotary Welding Positioner Turntable Table 110V 120W Angle 0 to 90° Welding Positioner Positioning Turntable 310mm Diameter Welder Positioner Turntable Machine 200mm Lathe Chuck

  • Working Capacity: 50KG/25KG: Horizontal/Vertical loading capacity:50kg/25kg.
  • Working table diameter/heigh: 310mm/380mm.Made of stainless steel, features high quality and durablility..
  • 0-90° Tiltable Table: The turning structure of worm and gear has the function of self-lock, and the worktable can be turned steplessly between 0-90°. It also can be fixed at any angle you want..
  • Three-jaw Welding Chuck: Three jaws are reinforced to avoid the weldment pieces from moving and falling.It is upgraded to be more accurate and more practical..
  • Stepless Speed Control: Using foot switch to control table rotation, the speed is regulated by the knob on the machine(0.5-5r/min stepless speed regulation)..
  • Time-controller: Time-controller can be furnished to control the working condition and working time, which can achieve the linkage of the positioner and welder..
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

Prime-Line F 2612 Sliding Window Sash Lock, Right and Left Hand, Chrome Diecast

  • Used on either horizontal or vertical sliding windows.
  • Can be used on camper shell or RV type windows.
  • Includes nylon mounting bushing for easy turning.
Check Stock