Categories

Best Hose Barbs With Push lock

Residential Misting System- Made in USA Pump- 200 psi Mid Pressure Patio Misting System-12 Nozzles Misting System

  • {Made in USA Pump & Tubing} Mid Pressure Patio Misting Kit complete with 200PSI Booster Pump, Cleanable Brass/Stainless Steel Misting Nozzles, UV treated flexible tubing, and push lock fittings. Easy to install..
  • {Pump Specifications} 110 Volt Kit Includes: - 200PSI Booster Pump with Plug (110v) - 50ft Flexible Tubing – Calcium Inhibitor Filter - 12 Brass/Stainless Steel Mist Orifice Nozzles - 0.012'' - 11 - Push Lock Mist Tees - 1 - Push Lock End Mist Elbow - 6ft Feed line with 3/4 Garden hose connector - Plastic Clamps.
  • {Installation} - Push Lock Fittings - Easy Connect -Whisper Quiet Operation Easy to hook with any garden hose Max Water pressure 200 PSI Supports up to 20 Nozzles Wall Mountable Plugs in to standard 115V outlet (wall plug included on 110v models only).
  • {Comes with Filter to protect your Nozzles} Booster Pump Features: Built-In Thermal Safety Switch Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock.
  • {Easy to Expand} Booster Pump Features: Supports up to 20 Nozzles 110v AC 1.2 Amps 0.50GPM Wall Plug (on 110v pumps only) Inlet Fitting: 3/4'' Garden Hose Connecter Outlet Fitting: 1/4'' and/or 3/8'' Push Lock. MC12020.
Check Stock

YuanTenhwy 3 PCS 3/8 10mm Brass Hose Barb Tee Fittings With 9 PCS Stainless Steel Clamps For Air/Water Hose Splicer 3-Way-T…

  • 【Size】: The outer diameter of Hose barb fitting is 3/8 inch (10mm).
  • 【Packing list】: 3 PCS of 3-way(Type T) Hose barbs fitting with 9 PCS of stainless steel hose clamp.
  • 【Material】: The hose barbs fitting is made of brass, and the hose clamp is made of stainless steel.
  • 【Features】: corrosion resistance, dimensions in line with standards, and overall smooth without burrs.
  • The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak.
  • 【Application Scenarios】：It is applicable to pipeline installation and maintenance, and is often used to assist in the transportation of gas, water or oil. However, federal laws do not allow the installation of these fittings for drinking water in the United States and its territories..
Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

  • 6AN female swivel to 3/8 barb fitting 45 Degree.
  • Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
  • Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
  • Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
  • EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..
Check Stock

ZCONIEY Swimming Pool Liner Bead Lock - 120 Feet for In-ground & Above-Ground Pool, White Pool Bead Wedge T-Lock Roll, Flexible Beaded Pool Liner Clips Fit Top & Side Wall Mount Liner Track

  • ...ue to exposure to the sun or extreme cold weather.
  • VERTICAL BARB SPECIFICATION - Our special 'T' shaped design can better lock pool liner. The 'cross' of the T - is 1/4 inch and the vertical is 5/16 inch. About 1/8" at the narrow end to about 5/32" at the thickest end. Not including the continuous horizontal linear 'barbs' or the base. Beside, 3 rows of parallel barbs on both sides of the embedded part for locking the liner more tightly.
Check Stock

1000pc Plastic Fasteners Lock for Hang Tags,Price Tags with String & Clothing Tags.Retail Store Supplies Used w/ Pricing Gun.Snap Lock 3' Pin Security Loop Snap Fastener. No Tag Gun/Tagging Gun Needed

  • HipGirl 1000pc loop lock plastic ties for clothing tags and labels, garage sale tags, plastic tags, bag tags. No clothing tag gun needed..
  • No clothes tagging gun needed. Push ends snap together easily by hand. Unlike tagging barbs (label tag gun fasteners) which require price tag gun and needles..
  • Same as tagging gun fasteners used with tagging gun for clothing, they are tamper proof. Won't pull apart..
  • Perfect for craft show marking products, jewelry tags, garage sale price stickers, tags for clothes or security tags. No need to bring the tag machine for tagging gun barbs. Just thread through the merchandise tags attach to your craft fair for sale items..
  • Great price for bulk retail store supplies. These plastic lock tag fasteners are must have for your store: attach retail tags, clothes tagger, plastic tags for labeling office files..
Check Stock

Five Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank

  • This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
  • Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
  • This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
  • Barbs provide excellent gripping power for fuel line connections.
  • We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

MSCRP Fuel Injection Line Fitting Adapter Kit EFI FI w/Filter/Regulator LS Conversion

  • 1Pc 6AN 25 feet of high-pressure fuel injection hose.
  • 1Pc 6AN to 3/8" Male Straight Filter Fittings+1Pc 6AN to 5/16" Fuel Filter Return Line Fitting.
  • 2Pcs 6AN to 3/8" Fuel Filter Feed Line Fittings+2Pcs -6AN to 1/4" NPT Fuel Pump Adapters+2Pcs 45 Degree -6AN Female to 3/8" Push Lock hose fittings.
  • 6Pcs straight -6AN Female to 3/8" Push Lock hose fittings.
Check Stock

Rain Barrel Connector Kit

  • Includes two stainless steel hose clamps, one 3' long x 3/4" diameter hose, two poly hose barbs, and two 1/2" bulk head assemblies.
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

【2 Pairs】MRbrew Homebrew Hose Swivel Nut Barb 1/4 Barb & 5/16 Barb Stainless Steel MFL Quick Disconnects Fittings for Brewing Keg System

  • 【MATERIAL】304 Stainless Steel, rust-free, can be used for long time.
  • 【1/4’’ BARB】Often used for liquid ball lock and pin lock disconnects.
  • 【5/16’’ BARB】Often used for gas ball lock and pin lock disconnects.
  • 【KEGGING NECESSARIES】Necessary for home or commercial brewing systems.
  • 【PACKGE】4 * Swivel nuts, 2 * 1/4’’ barbs, 2 * 5/16’’ barbs.
Check Stock

Tippmann Camoflauge Decal Kit for A-5

  • Fitting is compatible with 1/8" INTERIOR DIAMETER Hose.
  • Fitting is NOT compatible with 1/16" INTERIOR DIAMETER Hose.
Check Stock

WallPeg Locking Pegboard Hooks - 100 pk. Flex-Lock J Style for Peg Board Tool Organizer - AM 114 B

  • WallPeg Peg Hooks do not have split barbs that damage peg holes.
  • WallPeg Pegboard hooks have a smooth Flex-Lock system to protect pegboards.
  • Pegboard hooks have rounded safety tips and Patented Flex-Lock features.
  • Black Peg hooks fit 1/4" pegboard hole size, no barbs to damage board holes.
  • Easy to install, easy to move, stays in place…that’s the Flex-Lock way!.
Check Stock

Gardrip 60 Pieces Drip Irrigation Elbow Fittings for 1/4 Inch Drip Tubing Barbed Elbow Corner 90 Connectors for Irrigation or Sprinkler Systems

  • 【Package Quantity】: Package includes 60 pieces of elbow hose connectors, which let you connect your irrigation systems as you wish.
  • 【Barbed Design】: The barbed ends grab tubing, which makes the tube connection more firm, and not easy to fall off, ensure a secure leak-proof connection..
  • 【Material】: The drip line elbows are made of high quality engineering plastics, solid and durable, ensure years of using..
  • 【Easy to Install】: It is easy to install without any glue, tools or clamps. Simply push the tubing firmly over the barbs for a very tight fit that won't leak..
  • 【Wide Application】: These elbow fittings are suitable for garden, lawn, greenhouse, patio and other watering drip irrigation system..
Check Stock