Categories

Best Hose Clamp For Fuel Line

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

  • Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • please note that these are not for use on rigid, reinforced, or high pressure lines.
  • Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.
Check Stock

8AN Fuel Line Kit 16FT with Fittings Nylon Braided 1/2' 16 ft CPE Fuel Oil Hose - Not for PTFE E85

  • Application: Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Reliable Material: The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use..
  • The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose (psi): 500 psi. Bursting pressure (psi): 2000psi. Operating temperature range: -40°F to 257°F (-40°C to 129°C). Before buying, make sure that the pressure and temperature range are suitable for your application..
  • Package Includes: 10pcs 8an rotating hose ends (4 straight, 2pcs 45 degrees, 2pcs 90 degrees, 2pcs180 degrees),2pcs 8an hose separator clamp,1pcs gloves,1/2 braided fuel pipes (length: 16 feet). Hose ID: 0.44 inch (11.13 mm). The outer diameter of the hose: 0.67 inches (17.02 mm)..
  • Perfect Replacement: Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.
Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

DURATECH 6pcs Hose Clamp Pliers, Pinch Pliers, Line Clamp Pliers Set for Flexible Hoses Fuel Hoses Gas Lines Brake Hoses Radiator Hoses

  • 3 Different Sizes: This set comes with 6 red color fuel line clamps in 3 different sizes. Small 1/8-in to 5/16-in, Medium 1/2-in to 3/4-in, Large 3/4-in to 2-1/4-in..
  • Insulation Material: Our Line Clamps are made of PA6. Heat resistant reinforced nylon construction, non-conductive to ensure security. And with liquids like fuel, these help keep you safe!.
  • Wide Application: These hose clamp pliers are great for use on flexible hoses, such as brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more. NOT for use on hard, reinforced, or high pressure lines..
  • Anti-Slip Handle&Safety Buckle: The grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue. With security card buckle, these pliers can lock into position leaving your hands free to repair..
  • Make Repairs Easier: Using hose clamp pliers helps keep the mess to a minimum. Our plastic clamp pliers close off flexible hoses while leaving them undamaged. The smooth, Special-radius jaws and rounded jaw edges can effectively prevent damage to internal hose reinforcement..
Check Stock

Fuel Line Clamp Set, Hose Pinch Pliers for Radiator, Brake, Coolant and Gas Line, Red (3 Sizes)

  • Hose Pinch Pliers: These flexible fuel line clamp pliers can lock into position leaving your hands free to repair.
  • Multi-Use: These gas line clamps are the ideal coolant, fuel, and brake line clamps tool for auto repairs at home or for professional mechanics.
  • Reliable Material: The fuel line pliers kit is made from durable, lightweight, non-conductive, and rust-resistant nylon.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • Comes With: You will receive a total of 3 brake hose clamp pliers in 3 different sizes.
  • please note that these are not for use on rigid, reinforced, or high-pressure lines.
Check Stock

T-Bolt Hose Clamp Adjustable Stainless Steel Titanium Blue Clamp Diameter Ranger for 2.75\ inch（72-80mm）#4124

  • Size & Package: AN8, Included: 4 Pc x Hose Pipe Clamp.
  • Universal: Aluminum Hex AN4 clip pipe finisher, Fit for Braided Fuel Hoses / Vacuum Hose.
  • Fuel line clamp feature: anti-rust, anti-corrosion, waterproof, oil-proof. Pipe clamps are sturdy, strong and reliable.
  • Easy Installation: Design to Hex, better work with the wrench and looks more fashion and tidy appearance to your hoses with easy installation of a hose clamp.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Hose Clamp Pliers Set, 9pcs Wire Long Reach Hose Clamp Pliers Set for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps, Clamp Removal Tool by BOOTOP PIN

  • 9PCS Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps.
  • Hose Clamp Pliers For replacement of fuel, oil, and water hose.
  • Hose Clamp Tool Pliers for the removal and locking of clamps into open position..
  • Universal Hose Pliers Set Includes long-reach cabled hose clamp pliers(Flexible Hose Clamp Pliers), Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Locking Design: The 5 spring-clamp pliers are capable of locking in place to free your hands and speed up your repair work. Long reach hose clamp plier with wire flexible wire shaft convenient for working hidden areas and long distance. Perfect Fit: Having purpose-built tools will eliminate time-consuming work arounds and jerry rigging, making your hose work a breeze. This hose clamp tool box set works with plastic and metal hose clamps from 11/16 inch to 2 1/2 inches..
  • Automotive hose clamp pliers set may also know as hose clamp tool, hose clamp tool pliers,....
Check Stock

KEONG 5-Feet Fuel Line Hose Tube with 4 Size I.D. x O.D. 3/32In x 3/16In 1/8In x 3/16In 1/8In x 1/4In .080In x .140In for Poulan Craftman Chainsaw String Trimmer Blower, 5 Feetx4

  • Adapt to temperature: -30 ° C -120 ° C.
  • The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
  • Good to replace it at regular intervals,extra 10 Pcs Mini Fuel Hose Clamps Adjustable with screw-tightening hose clamps for more robust applications. could save you a lot time to find proper clamp in local market..
  • Designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors snow blowers dirt bikes and just about all small with 1/4" or 5/16" fuel lines engines..
  • Package includes: 6 Feet 1/4" ID Fuel Line.
  • 10 Pcs 13/32''-15/32''' Mini Fuel Hose Clamps Adjustable. Fuel filters and hose clamps are required for the use of fuel line. The dimensions of the various components within the kit are compatible.You do not need to purchase those part extra!.
Check Stock

Mardatt 7 Pcs Automobile Hose Remover Pliers and Hook Set Include Brake Line Pinch Pliers, Separator Pliers, Fastener Remover Hook, Pipe Repairing Tool for Auto Radiator Vacuum Hoses Trim O Ring

  • 【High-value Hose Removal Tool Set】 You will get 1 pcs hose removal pliers, 3 sizes hose clamp pliers(large, medium, small), 1 pcs fastener remover hook, 1 pcs V-type hose clamp removal hook & 1pc U-type hook, totally 7 pcs. In addition, quipped with a storage bag for convenient storage and carry. The complete tool kit for most practical size satisfy daily repair..
  • 【Hose Clamp Pliers 】 Made of durable nylon with excellent non-conductive and rust-proof.
  • Work great on close off flexible hoses without damage. Fully insulated to reduce risk of short circuit. Leaving your hands free to repair. A wide range of sizes to fit most applications. But NOT for use on rigid, reinforced, or high pressure lines..
  • 【Line Tube Hose Remover】High-grade materials ensure quality performance over the lifetime of the tool. Designed to facilitate quick and easy access into tight areas with flat and thin head. Remove Fuel, Vacuum or Heater Hoses from 5/32”to 1/2”(4mm to 14mm) diameter. Simple to use, push the vacuum hose or fuel line off the fitting or tube by sliver jaw..
  • 【Fastener Remover and Hook Set】The fastener remover is designed for removing automotive audio equipment, trim panels, door panels, window trim, emblems and metal clips without damaging upho....
Check Stock

Fuel Line Pliers Quick Release Remover Set, 9 inch Fuel Filter Calipers Tools for Auto Removal Fuel Filter Line & 7PCS Air Conditioning Cooling Pipe Hose Circlip Pliers Kit

  • ... 【Easy To Use】This set of quick disassembly pliers for automobile oil pipe and air conditioning pipe has a variety of sizes, the handle is easy to grasp, and the jaw has a variety of angles such as 45º/ 90º/ 180º, allowing access to small areas that are difficult to reach. Clamp the jaw on the fuel pipe and remove it easily..
  • 【Wide Application】Fuel Line Disconnect Tool Set used to remove and replace the connectors on the in-line fuel filter. They are suitable for cars of various common brands in daily life,such as Ford/GM /Chrysler/Mazda/Benz/VW/BMW/Audi and can also be used for the connectors of some electrical air conditioning hoses..
  • 【Package Includes】This set includes 3 fuel line hose pliers and 7 different sizes tool to remove/disconnect fittings on fuel lines of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch, a 9 inch fuel filter caliper, a hose pipe clamp clip, 4-in-1 pliers with 45º/ 90º/ 180º, a tool storage bag. It can meet the disassembly and assembly of your daily automobile fuel pipe and air conditioning cooling pipe..
Check Stock

440Pcs 15 Sizes 6mm-20mm Spring Band Clamps for Water Pipe-Automotive Fuel Line-Silicone Vacuum Low Pressure Air Tube Clamp Fasteners Assortment Kit

  • 【15 Sizes】The spring band clamp have various sizes including 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 15 different sizes can meet your different needs..
  • 【High Quality】The spring band clamp is made of 65 Mn steel, strong and durable, corrosion-resistant for long time use..
  • 【Leak Proof】The fuel line hose clamp can ensure a reliable and leak-proof connection between the hose and the joint, and is very suitable for connecting the hose to the joint to prevent flow leakage..
  • 【Easy to Use】1. Prepare pliers and spring clips. 2. Press firmly on both ears to make the inner ring bigger. 3. Put the spring band clips on a suitable pipe. 4. Loosen the pilers, can be clamped..
  • 【Wide Application】The vacuum hose clamp is suitable for push mower, riding mower and snowmobiles, ideal for vacuum and low-pressure fuel lines etc..
Check Stock