Categories

Best Hose Clamps For Fuel Line

IZOKEE 1/4\ Inch ID Fuel Line Set - 2 Meter / 6-Foot ¼ Inch Fuel Line + 2 Pcs 1/4 Inch & 5/16 Inch Fuel Filters + 10 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engine

  • 【Upgraded Set】The IZOKEE Package includes 6 Feet 1/4" ID Fuel Line.
  • 10 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. The dimensions of the various components within the kit are 100% compatible!.
  • 【3-layer thickened fuel line】The fuel line is divided into 3-layers: inner pipe, outer pipe and intermediate reinforcing layer. The inner and the outer pipe are made of rubber and the middle reinforcing layer is a woven fiber nylon thread. Wall thickness is 2.94mm. Oil resistant, cold-resistant and ethanol tolerance. 6 Foot / 2 m hose can be cut to size for all your applications..
  • 【Fuel Filter】Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor, only allows clean fuel flows in and keep engines at full power..
  • 【Hose Clamps】Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..
  • 【Wide Application】Fits selected Briggs & Stratton, Kohler, Craftsman, Simpson, Kawasaki, Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that use this type filter for motorcycle, lawnmower, power equipment and small engines ect..
Check Stock

KeeYees 1/4"ID 20-Foot Fuel Line Hose with 30 Pcs Hose Clamps for Motorcycles, Cars, Lawn Mowers, Marine Boat Outboard

  • ★ 20 FEET LENGTH ★ The length is up to 20 feet (6.1m). It is more convenient to tailor and use according to your length needs. In addition, there are 30 Pcs reliable hose clamps in the package. This helps you fix the position and further prevent liquid leakage..
  • ★ BRAIDED NYLON ★ Sandwich design. The nylon braided wire provides better support and makes the fuel line more resilient. It is difficult for leaks to occur. Average service life can be up to 5 years..
  • ★ 30 Pcs HOSE CLAMPS ★ Made of 65Mn Spring Steel. Durable and sturdy, corrosion resistance. The clamps are springy, nice construction and hold well..
  • ★ CLEVER PACKAG DESIGN ★ Similar to the design of a tissue box, you can take out the fuel line in the box according to your needs, then cut it. Also there is a about 9 inch (23cm) ruler at the box, which can roughly measure the length of the fuel line hose..
  • ★ Wide Application ★ KeeYees Fuel Line Hose is universal. Please pay attention to select the correct inner diameter size. Suitable for conveying gasoline, diesel, gas, bio-diesel, fuels in Motorcycles, Ca....
Check Stock

Glarks 290Pcs Fuel Line Hose Water Pipe Air Tubing Spring Clips Clamps Assortment Kit - Size 5-13MM

  • ☆【Product Type:】High quality fuel line hose tubing spring clips clamps assortment kit..
  • ☆【Wide Hose Clamp Size:】 In this set, we provide 9 size of hose clamps which are 35pcs 5mm, 35pcs 6mm, 35pcs 7mm, 35pcs 8mm, 30pcs 9mm, 30pcs 10mm, 30pcs 11mm, 30pcs 12mm, 30pcs 13mm, total 290pcs packed in a plastic box, easy to storage and carry..
  • ☆【Durable Quality:】 All the hose clamps are made of spring steel 65Mn, with zinc plated on the surface, corrosion and rust resistant, durable enough not easy to break..
  • ☆【Save Time and Money:】These fuel injection line style hose clamps are polished smooth to avoid damage to the hose, excellent for sealing hoses against loss of liquid, saving your time and money on costly repairs the pipe..
  • ☆【Function and Use:】These clamps are locking secure and tight, widely used in most motorcycles, boats, ATVs, snowmobiles gas tubing pipes..
Check Stock

Powerbuilt Multi-Directional Hose Clamp Pliers, Hold Clamps, Fuel Lines and Radiator Hoses, Gripping Plier Jaws - 647868M

  • 16mm Wide Pliers Jaws Effectively Grip Hose Clamps.
  • Cross Groove Design Grabs and Holds Hose Clamps Securely. No More Surprises by Flying Hose Clamps.
  • Special jaw design with stripe surface and intersected slot.
  • Great for VAG, SEAT fuel line and tank ventilation line clamps.
Check Stock

ATPEAM Hose Clamp Pliers Pinch Off Pliers Set 3 PCS Plastic Fuel Line Clamp Pliers Set for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses (3pcs Straight)

  • ...astic with good non-conductivity to ensure your safety during operation, the hose clamp pliers set is of highly durable, long lasting and chemical/fuel resistant. No need to worry, it dose not melt when in contact with chemicals or fluids..
  • 【Locking Function】These line clamps flexible hose clamps pliers have smooth rounded jaw edges and adjustable locking ring locking function which can squeeze the hose against the stable surface over a wide area without damage the hose. Each hose clamp plier includes a slider to lock the pinch off pliers in place, radiator hose clamps holds hoses in place so that you can work with both hands..
  • 【Ergonomic designed】This plastic fuel line clamp pliers set adopts ergonomic designed handle for comfortable grip and easy use, the grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue..
  • 【Specifications】In these pinch pliers kit, you will get 3 sizes pinch off pliers to fit all types of hoses, including straight hose clamp pliers: 5.9"/155mm, 7.3"/185mm, 10"/255mm. This hose plier set can clamp hoses with diameters of 15mm, 20mm....
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ...'' fuel filter caliper, a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, ....
Check Stock

Spring Hose Clamp 6-22mm Spring Band Type Action Fuel Silicone Vacuum Hose Pipe Clamp Low Pressure Air Clip Clamp-100Pcs

  • 【High Quality】These hose clamps are made of 65Mn Spring Steel. which is durable and sturdy, corrosion resistance in a humid environment, nice construction and hold very well.
  • 【Hose Clamps Size】This hose clamp assortment include 10 different diameters clamps 6mm, 8mm, 10mm, 12mm, 14mm, 15mm, 16mm, 18mm, 20mm, 22mm, each size 10 pieces, Fit many sizes of hoses.
  • 【Easy to Use】The surface of clamps are polishing that can effective prevent pipe damage, using pliers to open the clamps surface, Easy to tighten since it is out away from the hose surface..
  • 【Wide Applications】Spring hose clamps wide used for fuel lines/ vacuum hoses/ gas pipe/ air hose/ water pipe/ silicone hose, great choose for garage, boats, motorcycles, lawn and car engines connection, etc.
  • 【Package】Total 100 Pieces fuel line clamp, come with a plastic storage box has classification figure inside, could facilitate your storage and classification size..
Check Stock

CLAYTON MACHINE WORKS Firewall Mount Brake/Gas Pedal Assembly P/N TA-206-BKA1

  • Hose Clamps: These flexible pinch off pliers can lock into position leaving your hands free to repair.
  • please note that these are not for use on rigid, reinforced, or high pressure lines.
  • Multi-Use: These tools are ideal to use as coolant hose clamp pliers, fuel line clamps, brake line clamp, and even as fuel line clamp pliers.
  • Reliable Material: These hose pinch pliers kit are durable, light weight, non-conductive and rust-proof, easy to use.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • What's Included: You will receive a total fo 3 hose pinch off pliers in 3 different sizes.
Check Stock

Fuel Line Clamp Set, Hose Pinch Pliers for Radiator, Brake, Coolant and Gas Line, Red (3 Sizes)

  • Hose Pinch Pliers: These flexible fuel line clamp pliers can lock into position leaving your hands free to repair.
  • Multi-Use: These gas line clamps are the ideal coolant, fuel, and brake line clamps tool for auto repairs at home or for professional mechanics.
  • Reliable Material: The fuel line pliers kit is made from durable, lightweight, non-conductive, and rust-resistant nylon.
  • Dimensions: The large pliers measure approximately 9.93 x 2.12 x 0.75 inches, the medium pliers measure 7.18 x 1.87 x 0.75 inches, the small pliers measure 6.12 x 1.62 x 0.62 inches.
  • Comes With: You will receive a total of 3 brake hose clamp pliers in 3 different sizes.
  • please note that these are not for use on rigid, reinforced, or high-pressure lines.
Check Stock

Koehler Enterprises KE001 Hose Clamp Emergency Kit, 6 Piece

  • [Package Contents]:The 10AN hose separator 5pcs with allen wrench 1pc,please ensure the sies of the hose separator clamp match the OD of your hose.
  • [Quality Material]:The hose separator is aluminum, it's different from other plastic products which will pollute the environment, and you also don't need to use plastic tape to fix your line.Metal Suits -10AN SS braided hose secure tight with hex allen head bolt.more easy for you to install them..
  • [ Compatibility and Reusable ]:Our guarantee that this product is not disposable, and you can easily reuse them. You can use them for Fit for 5/8 Fuel Line, Oil Line, Brake Line, Water Pipe and Gas Line and so on.
  • [Convenient and tidy]:The hose line separator clamps are used to improve the tightness between multiple pipes and make the hoses more organized and tidy, especially in cars or other small spaces.
  • [Tip]:Our hose separator clamp suit,usually used forwater Hose pipe Gas,Line,Fuel Line and other purposes,Please check the size and pictures carefully before buying,If you have any questions, Please contact us, We will be happy to provide you with the best service..
Check Stock

HIAORS Gas Fuel Filter Hose Tube Line for Chinese GY6 50cc 150cc 139QMB 157QMJ Tao Tao Scooter ATV Motorcycle Parts

  • ... Husqvarna, Oregon, Stens, Gravley, John Deere, Kubota engines that designed for conveying gasoline, E-85, diesel, and bio-diesel, fuels in mowers tractors motorcycle snow blowers dirt bikes and just about all small engines..
  • 【Upgraded Set】The HIDARS Package includes 9.8 Foot 1/4" ID Fuel Line.
  • 20 x 1/3" ID Hose Clamps. Hose Clamps are made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage..
Check Stock

AloneGoer 1/4″ ID Fuel Line + 1/4″ In-Line Fuel Filters + 2/5″ ID Hose Clamps Clips Compatible with Kawasaki Kohler Small Engines ATV UTV Motorcycle Snowmoble

  • SIZE: 1/4″ ID = ID 6mm x OD 12mm Fuel Line.
  • APPLICATION: Transfer petroleum products fuel lines vapor emission lines and vacuum smog control..
  • ADVANTAGE: The Fuel Lines are oil resistant, cold-resistant and ethanol tolerance..
  • Replace fuel line of Kawasaki EZGO Polaris Snowmobile Lawn Mowers Tractors Bike Scooter ATV Golf Cart Motorcycle ect. Power Equipment.
  • Package include: 5 feet Fuel Line Tubing + 20x Clamps Clips + 6x fuel filter.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock