Categories

Best Hose Connector Elbow

MAXFLO Hose Adapter Garden Hose Elbow Connector 90 Degree Brass Hose Connector Elbow [2 Pack] 90 Degree Hose Elbow for RV Water Hose Bib | Hose Connectors | 4 Extra Pressure Washers

  • Hose adapter 90 degree hose elbow: female to male connector, universal fit 3/4" garden hoses, water bib, rv water hose and more.
  • 90 degree hose elbow allows practical hose maneuvering without twisting and damaging your valuable water hose. Made of high quality corrosion resistant metal brass.
  • No more leaks fitted with o-ring seals for a watertight connection that prevents leaks, high quality connector for a solid water connection saving you time and money.
  • Standard connection 3/4" garden hose elbow 3/4" garden hose thread, male to female multi use connection perfect for adding to quick connectors, hose shut off valves and much more.
  • Solid brass high quality brass will stand the test of time, extra 4 pressure washers included.
Check Stock

BBTO 3/5 Inch AC Drain Hose Connector Elbow Fitting with Rubber Ring for Mini-Split Units and Window AC Unit and Air Conditioner Drain Hose with 5.2 Feet Long

  • Fit size: the diameter of drain hose connector elbow fitting is approx. 15 mm/ 0.6 inch, it will fit most air conditioner unit of mini-split units or window AC unit and universal air conditioning, the air conditioner drain hose has an inner diameter of 15 mm/ 0.6 inch and an outer diameter of 26 mm/ 1 inch, the length of hose is approx. 1.6 m/ 5.2 feet.
  • Material: the drain hose connector elbow is made of hard plastic material, enough durable to use in most weather conditions, the air conditioner drain hose is made of quality EVA and PE, not easy to age, and the thickened end of the drain hose is not easy to deform.
  • Leak-proof design: there is a rubber ring on the drain hose connector elbow to stop water from leaking from the side, the end of drain hose adopts thickened design that makes the connector more closely connected with the drain hose, not easy to fall off and eliminate the case of water leakage.
  • Practicality: the air-conditioning hose has good elasticity and resilience, it can be bent to shape as you need, it can be restored immediately after compression and has a long service life.
  • Note: the drain pipe should have a suitable angle of inclination when installed on the air conditioner, it's recommended to hang above the desired overflow area.
Check Stock

Camco 40004 RV Gravity Water Fill Adapter with Shut Off Valve and Clip - Allows for Quick Filling of Your RV's Gravity Water Fill - Adapter Fits Standard Drinking Water Hoses

  • Protect Your Water Hose: Eliminates stress and strain on your RV hoses.
  • Easy to Set Up: Thanks to an easy-grip connector, it's simple to protect your water hose with this 90-degree water hose elbow for RV.
  • the brass elbow with swiveling easy grip connector fits 3/4" to 11.5 NH hose connections.
  • Durable Materials: Give your RV hose support with our solid brass elbow adapter.
  • Water Hose Connectors and Fittings: Eliminate hose crimping, kinking, and straining in one easy step for natural water flow.
  • Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ...t hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesiv....
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ... hose made of high quality flame retardant aluminum that measures 4" (diameter) x 10 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesiv....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ...t hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including hydroponic planting rooms and tents, bathrooms and attics, heating and cooling equipment and other equipment. The STV-90 is used for the air duct connector of the dryer. The strong adhesiv....
Check Stock

Funmit STV-90 Dryer Duct Connector - 90 Elbow Dryer Hose Snap - Indoor Hook-up Dryer Vent Kit fit 4in vent ducting

  • 【POWERFUL FUNCTIONS】- Use the STV-90 dryer vent connector to quickly connect your dryer and hose to Make your dryer more efficient. The connector set includes 1* 90 elbow, 1* drying hose clamp , 1* plastic drying hose. You will never have to connect the hose directly to the dryer again.
  • 【EASY TO INSTALL】- The steps to install dryer hose vent fittings are very simple, you just need to follow the instructions in the manual and you can complete the installation in a few minutes without any special tools.
  • 【PREMIUM MATERIAL】- Our 90 Degree Elbow Dryer Duct Connectors are strictly made of 100% factory-tested high-quality materials, fully compliant with OEM standards, the silicone sealing strip can provide your dryer with more efficient and stable exhaust function . Robust material extends the life of the dryer vent connector.
  • 【WIDE COMPATIBLE】- Use our newest STV-90 dryer duct connector design, it measures 5.5 in x 6 in x 4.25 in. You can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match, suitable for all brands of dryers on the market.
  • 【SHOP WITH CONFIDENCE】- Funmit adhere to provide all customers with a simple, streamlined shopping experience of large appliance replacement parts, and prove that we have the hi....
Check Stock

Twinkle Star Garden Hose Elbow Connector 90 Degree Brass Hose Elbow (2Pcs)+ Extra 4 Pressure Washers

  • 90 degree hose elbow: Female to male connector, universal fits for 3/4″ garden devices such as garden hose, RV camper water hose..
  • These 2 pack garden hose elbow made of high quality corrosion resistant brass..
  • With 3 years product warranty .If for any reason you are not satisfied, please let us know and our customer service team will help you RETURN OR REFUND..
  • Extra 4 pcs pressure washers which are good ideal for replacing the damage washers to prevent water leak or fix missing washer issue..
  • Avoiding twist to prolong the life of hose with this thoughtful design..
Check Stock

Shark Industrial Premium No-lead brass dishwasher swivel connector elbow fitting 3/8" comp x 3/4" FHT

  • One lead-free brass swivel connector elbow fitting servering as adapter to attach to dishwasher hose with 3/8" comp connection and connect to dishwasher that has 3/4" female garden hose thread connection.
  • BURST PROOF - Designed to last, our connector fitting is made of solid forged lead-free brass with rubber washer for seamless connection to dishwasher.
  • CERTIFICATIONS - Our fitting is certified by UPC,WRAS,IAPMO Lead Free, RoHS.
  • EASY FIT - the elbow fits dishwasher with 3/4" FGH(Female Garden Hose) connection.
  • MONEY BACK GUARANTEE - We offer 100% money back gurrantee with no questions asked. This great product also comes with 10-year warranty for quality related issues because we are so confident about our product quality. Rest assured for your purchases..
Check Stock

EZ-FLO 48336 Braided Stainless Steel Dishwasher Installation Kit, 6 foot

  • LENGTH: The water connector measures 6 Ft long.
  • MATERIAL: This long-lasting water connector is made up of high-quality, heavy-duty stainless steel which resists corrosion and provides extreme durability.
  • UNIVERSAL KIT: This installation kit is universal and fits major dishwasher brands with ease.
  • CONTENT: The kit includes both elbow fittings- hose thread and male pipe thread, one hose clamp for drain hose, 3 wire nuts and one 1/2″, and a 6 Foot long braided water connector.
  • EASY INSTALLATION: The included hardware makes the installation process easier and efficient.
Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

  • ...nd backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
  • ¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..
Check Stock

Valterra F02-3103 Red Bulk EZ Coupler Sewer Adapter

  • RV SEWER ADAPTER: Twists directly onto your existing drain hose with no extra tools or hose clamps for easy installation.
  • 90-DEGREE DRAIN FITTING: Turns your RVs drain hose into a 90-degree elbow that easily presses into multiple sizes of sewer outlets for easy draining.
  • 3/4" CONNECTOR INCLUDED: Includes a 3/4" threaded connector for a second gray water tank.
  • VERSATILE DESIGN: Multi-tiered design presses into different sizes of sewer outlets for use at any campground or RV site.
  • COMPACT SIZE: Compact size and 2-piece design allows it to remain attached to your hose for convenient use.
Check Stock