DIYmall 6M GPS Module with EEPROM for MWC/AeroQuad with Antenna for Arduino Flight Control Aircraft
- When you test the GPS module, pls kindly note that you need test it in outdoor wide plain place, not indoor..
- The 6M GPS module with ceramic destined antenna, super signal,can be quickly positioned..
- The 6M GPS module uses serial comms to the host. It is setup to use 9600baud by default..
- LED signal indicator,With data backup battery..
- EEPROM power down to save the configuration parameters data..
Check StockCarel Temperature Thermostat IR33F0AHA0 with Temperature Sensor Probe 115V / Technician Ready by Xiltek
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check StockMIDIPLUS PianoEngine USB Host MIDI Sound Module
- GM sound module with improved piano sound sets also drum sound.
- Provides 128 the newest high-quality Piano sounds still GM compitible.
- USB host let connect USB keyboard, improved compatible issueS, such as Akai professional’s MPK mini MKII and other keyboards, in 100 drum songs.
- Interfaces: 3.5mm audio input and output, MIDI IN and OUT, USB Host, micro-USB interface.
- PianoEngine Firmware Update V0.15 20220428 can be downloaded in MIDIPLUS Taiwan website.
Check StockVXDIAG SVCI J2534 Diagnostic Interface Supports SAE J1850 Compatible for Ford Mazda Scan Tool
- VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can....
- High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the....
- [Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed:....
- VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then....
- For software installation, please feel free to contact our online customer service..
Check StockGPS Module Receiver,Navigation Satellite Positioning NEO-6M Arduino GPS Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity,....
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your....
Check StockHiLetgo 2pcs HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth....
- Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged....
- Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART....
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control,....
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port....
Check Stock
2Pack GPS Module,Navigation Satellite Positioning NEO-6M,Arduino GPS, Drone Microcontroller, GPS Receiver Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
- GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
- With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna.
- If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer..
Check StockAITRIP GT-U7 GPS Module GPS Receiver Navigation Satellite with EEPROM Compatible with 6M 51 Microcontroller STM32 UO R3+ IPEX Active GPS Antenna for Arduino Drone Raspberry Pi Flight 2PCS
- GT-U7 main module GPS module using the original 7th generation chip, Software is compatible with NEO -6M..
- With a USB interface, you can directly connect it with computer. That is, with the host computer-owned serial port function, no need for external....
- GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning....
- Operating voltage: 3.6V-5V (or direct usb power supply).
- Operating baud rate: 9600 (can be modified).
- Mobile phones, camcorders and other mobile....
Check StockGPS Module GPS NEO-6M Ar duino GPS Drone Microcontroller GPS Receiver Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
- How to use the GPS module better, the link is obtained in the Product guides and documents, please download it before use..
- ★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make....
- GPSBaud needs to be set to 9600 instead of 4800.
- PPS pin is not needed unless using the GPS to drive a hardware high precision clock.
- With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect.
- USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX....
Check Stock
HiLetgo HC-06 RS232 4 Pin Wireless Bluetooth Serial RF Transceiver Module Bi-Directional Serial Channel Slave Mode for Arduino
- Works with any USB Bluetooth adapters, running in slave role: Pair with BT dongle. Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane.
- Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid..
- Small size, low power consumption,high sensitivity for send and receive. Bluetooth version: V2.0+EDR &Operating voltage: 3.3V &Host Interface:UART &Storage Temperature:-40℃~+150℃&Signal coverage: 30ft &Item size: 4.3 * 1.6 * 0.7cm &Item weight: 3g..
- The module is mainly used for short-range data wireless transmission,such as Bluetooth wireless data transmission,Industrial remote control, telemetry,Traffic, underground positioning, alarm,Smart home ect..
- Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices..
Check StockDog Style Volume 2
- 2022 New Electric Splatter Cool Ball Blaster Toy (MP5 3.0) : We use high-quality materials to upgrade this electric Splatter Cool ball blaster toy.....
- Wonderful Fully Automatic Shooting Team Game: use Coriardo automatic splatter Cool balls blaster MP5 for a wonderful battle, you will have a lot of....
- Safe and Eco-Friendly Gel Beads (Unlimited): We configure soft gel beads. The gel beads is smooth and brittle after absorbing water, and will not....
- User Manual (Safety Instructions): Please wear goggles when using the electric splatter blaster toy, and do not shoot at the opponent's head when....
- Note(Special Reminder): When assembling gel splatter Cool ball blaster MP5, push the black feeder firmly along the rail. Be sure to check that the....
Check Stock
KZ AZ09 Bluetooth 5.2 Module with Mic Wireless Waterproof Ear Hook Extra Long Battery Life Bluetooth Cable for KZ ZST/ZSTX/ZS10/AS06/AS10/BA10/ZSR/ES4 (B pin)
- [Free Switch Between Wired and Wireless] - KZ Bluetooth module is specially designed for Earphones with 0.75mm /0.78mm pins, making the wired headphones become wireless headphones in seconds, and getting rid of the bondage of wire harness. It allows you to switch between wired and wireless according to the needs of different scenarios. It also ensures the sound quality of the original headphones. ( *This product is only for bluetooth upgrade earhook, without earphones.).
- [High-Fidelity Sound] - Adopting bluetooth 5.2 technology, Bluetooth Module offers you an unparalleled audio experience with faster transmission speed, stronger connection stability. At the same time, AAC advanced audio coding transmission technology to greatly improve the quality of hearing and bring natural and clear sound..
- [Long Battery Life] - Each earbud can get 6 hours playback from a single charge. 800mAh charging case supports 7 times of recharging for both earbuds, gives up to 42 hours continuous music time. Keep your music going all day even when you go out..
- [Double Host & High-Performance Game Mode] - Eliminate the conventional single host, dual-channel transmission, lower delay. Earhooks can be used individually. The earhook features a high performance mode that gives you ....
Check Stock
Ingcool 4G/3G/GNSS HAT Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano, Based on SIM7600A-H, 4G/GNSS Module Support LTE CAT4 up to 150Mbps for Data Transfer, etc.
- SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
- Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
- Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
- Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock
