Categories

Best Hot Dipped Galvanized Pipe

(4) Hot Dipped Galvanized Dipped Square U-Bolts (1/2\ D x 2 1/16\ W x 6 5/16\ L) for Boat Trailer

  • U-bolt Size: 1/2" D x 2-1/16" W x 6-5/16 L, thread length: 2-1/2" inches, suitable for 2" x 2" square beams and shafts, (order Please check the measurement size carefully before).
  • Hot Dipped Galvanized : U-bolts are made of Hot Dipped Galvanized，The white surface is a thick galvanized layer, which enhances the rust and corrosion resistance of the U-bolt..
  • You can get: (4) U-bolts, (8) hexagon nuts, (8) flat washers, (8) lock washers, these additional accessories are also Hot Dipped Galvanized. With these, you can spend less time repairing and more time boating.
  • Tips:Use a hand wrench or socket ratchet when installing the nut. Do not use high-speed power tools or impact tools to tighten the nuts..
  • After-sales service: Our U-bolts provide a one-year warranty service. Please rest assured, if you have any questions, please feel free to send us an email via Amazon. We will solve it for you within 24 hours..
Check Stock

3-1/2 Exterior Hot Dipped Galvanized Common Framing Nail 16d Full Box ~2350 Nails

  • 3-1/2" (16d) Exterior Hot Dipped Galvanized Common Framing Nail for General Construction Purposes.
  • Hot Dipped Galvanized to Prevent Corrosion and Rusting - Smooth Shank - 8 Gauge (0.165).
  • Common Nails are Able to Carry More Load than Box Nails Due to Heavier Shank Size.
  • Durable HD Coated For Outdoor Use, Pressure Treated Wood, Construction, Carpentry and Framing.
  • Our Galvanized Common Nails conform to ASTM F1667 Standards.
Check Stock

Square U-Bolt Zn3/8x4x7

  • SIZE: 1/2" D x 3 -1/16" W x 3-5/16" L (Exactly AS Pictured).
  • CONTENTS: (4) U-bolts with (8) each flat washers, lock washers, and Heavy Hex Head Nuts (ALL hot dipped galvanized).
Check Stock

Rohn 25 Series 40' Basic Tower (25G)

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (5) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete.
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*.
Check Stock

Rohn 25G Series 30' Basic Tower Kit

  • INCLUDES: (2) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *30' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 20' Basic Tower Kit

  • INCLUDES: (1) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *20' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

XL 10" Low Profile Survey Marker - 2 Pack - Hi-Vis Orange

  • 2 Pack - Marine Hot-Dipped Galvanized Steel to last forever, NOT just painted or powder coated that will rust away over the years.
  • Installs flush with ground so you can easily mow or drive right over them.
  • Lifetime Warranty - Marine Hot-Dipped Galvanized Construction.
  • Easy to locate but not obtrusively noticeable to neighbors or someone passing by.
  • 2 Pack of XL Size - 10" long w/Large 2 5/8" diameter head - Patent Pending.
Check Stock

National Hardware N278-879 V7721 Corrugated Joint Fasteners in Bright, 30 pack

  • Siding Nails 2-1/4-Inch x .092-Inch, 15-Degree Collated Wire Coil.
  • Full round head and ring shank, hot dipped galvanized fiber cement material offers superior protection in all pressure treated lumber.
  • Material - HDG steel (Hot-Dipped Galvanized Steel).
  • 2-1/4-Inch x 0.092-Inch. Also know as siding nails 2-1/4In, siding nails coil, coil nails siding, coil nails 15 degree, coil nails 2-1/4In.
  • Package includes 12 x 300 count siding nails.
Check Stock

Gate Fork Latch - 1-3/8\ Fork, Wall Mount for Chain Link Fence Gate | Chain Link Fence Hardware | Gate Latch

  • Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
  • Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
  • Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
  • Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
  • Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..
Check Stock

Portable, Progress Solar and Wind Powered Light Tower

  • Kit Includes (3) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *40' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • Features 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

Rohn 25G Series 50' Basic Tower Kit - Rohn 25G

  • INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS, (1) ROHN 25AG2 STANDARD 9' 9" TOP SECTION *50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete*.
  • The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
  • 1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more information..
  • This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.
Check Stock

1/2 Lock Washer Split Ring Hot Dipped Galvanized Steel Qty 1000

  • Lock Washer Split Ring Hot Dipped Galvanized Steel.
  • Split ring lock washers are used to prevent nuts, bolts and screws from vibrating loose..
  • Lock washers are split at a certain point and bent giving them a helical shape, creating a spring-like effect.
  • In a variety of materials, these lock washers are pressed down adding extra pressure to the nut or bolt and material. This extra pressure creates a resistance to rotation..
  • Hot dipped galvanized steel offers superior corrosion resistance and is well suited for harsh environments, HDG should only be used with other HDG fasteners.
Check Stock

Haws 8300-8309 Combination Emergency Shower and Eye/Face Wash with Axion MSR Showerhead, Green/Silver

  • Eyewash streams provide zero vertical velocity stream engineering with even laminar flow for enhanced comfort, stability and effectiveness.
  • Axion MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching.
  • Pipe and fitting: 1-1/4-inches Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4-inches IPS.
  • Certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.
  • Axion MSR eye/face wash head (patent pending) uses an inverted directional laminar flow to sweep contaminants away from the vulnerable nasal cavity.
Check Stock