uxcell Mini Hot Glue Sticks for Glue Gun 0.27-inch x 4-inch Brown 12pcs

  • 4 inch long and 0.27 inch diameter hot glue sticks fits most of glue guns on the market..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

uxcell Mini Hot Glue Sticks for Glue Gun 0.27-inch x 4-inch Dark Green 12pcs

  • 4 inch long and 0.27 inch diameter hot glue sticks fits most of glue guns on the market..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

uxcell Mini Hot Glue Sticks for Glue Gun 0.27-inch x 4-inch Light Blue 12pcs

  • 4 inch long and 0.27 inch diameter hot glue sticks fits most of glue guns on the market..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

uxcell Mini Hot Glue Gun Sticks 11-inch x 0.44-inch for Glue Guns, Yellow 5pcs

  • 11-inch long and 0.44-inch diameter hot glue sticks fits most of glue guns on the market..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

uxcell Mini Hot Glue Gun Sticks 8-inch x 0.27-inch for Glue Guns, Yellow 10pcs

  • 8-inch long and 0.27-inch diameter hot glue sticks fits most of glue guns on the market..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

uxcell Mini Hot Glue Gun Sticks 8-inch x 0.27-inch for Glue Guns, Yellow Clear 20pcs

  • 8-inch long and 0.27-inch diameter hot glue sticks fits most of glue guns on the market..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

uxcell Mini Hot Glue Gun Sticks 12-inch x 0.44-inch for Glue Guns, White 12pcs

  • 12-inch long and 0.44-inch diameter hot glue sticks fits most of glue guns on the market. Safe to use with both high and low temperature glue guns..
  • EVA material, with strong viscosity, easy operation, aging resistance and good temperature resistance, will not harden after long-term storage..
  • Tough & versatile, Hot Glue Sticks provide a long term hold even on hard to bond surfaces..
  • 7mm glue stick is used for 12W, 20W, 25W and 30W small glue guns (below 30W, including 30W).
  • 11mm glue stick is used for 60W, 80W, 100w-200w (above 60W).
  • Please Note : Avoid exposing the hot melt adhesive stick to the sun for a long time. The nozzle of the hot melt glue gun and the melted glue sticks are at a high temperature during operation. Do not touch them..
Check Stock

Women's Christmas Halloween Feather Flower Lace Veil, Black, Size One Size

  • Masquerade half face mask on stick with side feather flower..
  • the length of the stick from the mask edge to the stick end:about 22.5cm (8.86’’).
  • Christmas Halloween New Year Annual meeting birthday party cocktail party masquerade masks.
  • Note.1:the stick is glued to the mask bottom plate by hot melt glue.which won’t fall off under normal use, because we have used enough glue to fix them..
  • Note.2:However, since the mask is shipped from China by sea or by air to the USA, which will inevitably be subjected to mechanical collision or extrusion.A very small part of the stick may fall off.If the stick falls off, please heat the hot melt and reattach It, then it would work normal.(Take it carefully if you mind.).
  • Note.3:If you have any other problems, please contact us asap, we will solve your problem quickly and properly.Thank you!.
Check Stock

Men's Masquerade Christmas Halloween Ball Party Half Face Masks on Stick (Black)

  • Masquerade half face mask on stick with six colors.
  • the length of the stick from the mask edge to the stick end:about 22.5cm (8.86’’).
  • Color:black, blue, gold, green, purple, red.
  • Christmas Halloween New Year Annual meeting birthday party,cocktail party,masquerade mask.
  • Note.1:The stick is glued to the mask bottom plate by hot melt glue.which won’t fall off under normal use, because we have used enough glue to fix them..
  • Note.2:However, since the mask is shipped from China by sea or by air to the USA, which will inevitably be subjected to mechanical collision or extrusion.A very small part of the stick may fall off.If the stick falls off, please heat the hot melt and reattach It, then it would work normal.(Take it carefully if you mind.).
  • Note.3:If you have any other problems, please contact us asap, we will solve your problem quickly and properly.Thank you!.
Check Stock

Women’s Black Half Face Mask on Stick with Side Feather Flower with Colorful Sequins Covering it(Gold)

  • half face masquerade mask on stick with side feather flower and sequins covering..
  • the length of the stick from the mask edge to the stick end:about 22.5cm (8.86’’).
  • Christmas Halloween New Year Annual meeting birthday party cocktail party masquerade masks.
  • Color:black, blue, gold, green, purple, royal blue, red, rose red, white.
  • Note.1:the stick is glued to the mask bottom plate by hot melt glue.which won’t fall off under normal use, because we have used enough glue to fix them..
  • Note.2:However, since the mask is shipped from China by sea or by air to the USA, which will inevitably be subjected to mechanical collision or extrusion.A very small part of the stick may fall off.If the stick falls off, please heat the hot melt and reattach It, then it would work normal.(Take it carefully if you mind.).
  • Note.3:If you have any other problems, please contact us asap, we will solve your problem quickly and properly.Thank you!.
Check Stock

Hot Glue Sticks Colored, 36 Pcs ENPOINT 3.93 x 0.43 in Full Size Hot Glue Sticks, Glitter Adhesive Hot Melt Glue Sticks Standard for DIY Art Craft Wood Glass Card Fabric Plastic Christmas Decoration

  • 【Best Choice】12pcs Colorful, 12pcs Glitter, 12pcs Transparent Clear, totally 36pcs for most repair DIY and Crafts use, 100mm/3.93" length, 11mm/0.43" diameter glue sticks fit for full size glue tool with a smoothy operation..
  • 【Better Strong Viscosity】Hot melt glue sticks are made from natural and smell-free Resin EVA, strong viscosity, no odor, strong adhesive, anti-aging, beautiful colored..
  • 【Multiple Test, Save Time】After our multiple tests,these glue sticks's best melt time is time-saving, adhesive cooling time about 2 minutes is the best working time for car dent repair..
  • 【Easy-to-Use】Simply insert the glue stick in the glue tool, turn on and Glue On.It is an ideal hot melt glue for home, office and school projects. Perfect adhesive for your crafts and DIY projects. Please use the glue sticks with adult supervision..
  • 【Wide Applications】Hot Melt Adhesive Glue Sticks are perfect for stick paper/plastic/wood/glass/fabric/metal etc, such as card making, carton sealing, phone case beauty, Christmas crafts, electronic appliances, school, home decorations and DIY art craft.Can be used on wood, fabric, felt, plastic, ceramic, and glass..
Check Stock

Colored Hot Glue Sticks, ENPOINT 3.93 x 0.43 in Hot Melt Glue Sticks Full Size, Standard Adhesive Hot Glue Sticks, Dent Repair Glue Sticks Car Repair Remover Crafting Tool Set, Bulk 36 Pack

  • 【Best Choice】Totally 12 colors 36pcs hot melt glue sticks for most repair use, 100mm/3.93" length, 11mm/0.43" diameter glue sticks fit for full size glue tool with a smoothy operation..
  • 【Quality Material】Colored hot melt glue sticks are made from quality smell-free Resin EVA, strong viscosity, no odor, strong adhesive, anti-aging, beautiful bright multiple colors..
  • 【Strong Viscosity】Strong adhesive can be used on wood, fabric, felt, plastic, ceramic, and glass etc. with different colors to blend into different surfaces when gluing..
  • 【Easy-to-Use】Simply insert the glue stick in the glue tool, plug in, turn on and Glue On.It is an ideal glue for home, office and school projects. Perfect adhesive for your crafts and DIY projects. Please use the glue sticks with adult supervision..
  • 【Wide Applications】Hot Melt Adhesive Glue Sticks are perfect for stick paper/plastic/wood/glass/fabric/metal etc, such as card making, carton sealing, phone case beauty, Christmas crafts, electronic appliances, school, home decorations and DIY art craft.Can be used on wood, fabr....
Check Stock

DTF Powder White Digital Transfer Hot Melt Adhesive 500g, DTG Pretreat Powder for Epson Printer DTF DTG Printer Direct Print on All Fabric Include Jeans Cotton T Shirt Textile etc

  • ...d on all color include black white dark light. Design on hoodies, canvas, tote bags, T-shirts, pillow cases, caps, gloves, sneakers, phone cases etc..
  • VIVID COLOR & WATERPROOF. The DTF Hot Melt Powder for DTF transfer ink and film is TPU material, feels soft and stretchy and offers high adhesion. The DTF Powder will stick to the ink instead of the film, provide bright, vivid color. Waterproof and Washable, Durable..
  • FOR INKJET PRINTER & DTG DTF PRINTER. The DTF transfer powder work with all DTF&DTG inkjet printers, include epson printer, DTG DTF printer L1800 F2100 ET4700 XP15000 Printers. And work with any PET film size..
  • HIGH QUALITY & FEATURE.The DTF hot melt powder is 80-200um, works with both automated shaker and hand-application. Work with both hot and cold peel PET films for high production output..
  • PACKAGE INCLUDE & 100% SATISFY GUARANTEE. 500G HOT MELT POWDER. NOTE: To use the DTF Transfer Adhesive, you need a DTF printer and DTF film (not included in the package). Please apply full refund if any unhappy, we will try our best to make you smile..
Check Stock