HICTOP CR-10 Hotend Full Assemble MK8 Extruder Fit for Creality 3D Printer CR-10 CR-10 mini CR-10S 3D Printer Replacement Parts
- Easy for the CR-10 hotend to Assemble: Packed whole extruder kit, just fix it on X axis and connect to control box, it will work..
- 2 Durable Quality: plug and play cr-10 hotend assembly with high quality..
- 3 Fit for: Creality CR-10, CR-10S, CR-10 Mini and similar 3D printers.
- 4 Stable Material: Aluminum, stainless steel, brass and MK8 nozzle.
- 5 Extruder kit : cr-10 hotend with thermistor, heater carriage, and two cooling fans..
Check StockCreality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover×3, 0.4mm Ender 3 Nozzle×3 and 2 Pair Pneumatic Couplers
- It's 100% Creality Original Upgrade Assembled Extruder Hotend..
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills..
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit..
- With more terminal housing and pins as spare parts, in case fail installation and waste..
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W..
Check Stock
Official Creality Sprite Extruder Pro Upgrade Kit for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 MAX/Ender 3 S1/Ender 3 S1 Pro 3D Printers, Support Printing Flexible Filament, BL Touch/CR Touch
- ...tible With Creality Ender 3 Series 3D Printer - Creality Sprite extruder pro is compatible with creality Ender 3, creality Ender 3 v2, creality Ender 3 pro, creality Ender 3 s1, creality Ender 3 max, creality ender 3 s1 pro, creality ender 3 s1 plus 3d printer...
- All Metal Hotend Kit - All-metal Hotend Kit with heating block, titanium throat and cooling block, allows you to print high temperature materials at 300°C. This ender 3 v2 upgrades perfectly combine dual gear extruder and all metal hotend, enables all the Ender-3 series 3D printers a direct extrusion and high temperature printing conditions..
- Large Torque, Extrusion Force Up to 80N - The use of gear with 3.5:1 gear ratio which perfectly matches with motor makes extrusion force up to 80N (depending on filaments). More precise control of feeding withdrawal..
- Dual Gear Feeding, More Stable Printing -The ender 3 direct drive adapts double-toothed structure which does not damage filaments, allowing more reliable and stable feeding. With adjustable tensioner, allows you to fine-tune the pressure exerted by the drive gears onto the filament to print more exquisite models....
Check StockCreality Spider All Metal Hotend Up to 500℃ High Temperature High Speed 3D Printer Extruder Hot end Kit Compatible with Ender 3 Ender 3 pro Ender 3v2 Ender 5/6/7 CR-10 Series
- 【 Up To 500℃ High Temperature Resistance, Compatible With Most Filaments】 With scientific structure and material selection, Creality Spider All....
- 【250mm/s High-Speed Printing, Save Your Time】The hotend heating block is mainly composed of copper alloy material which has the advantage of....
- 【No Clogging ,Smooth Extrusion】 With fluid polishing process, the Ra ≤ 0.3 roughness inner wall enhances fluidity of filament. Copper alloy....
- 【Simple Installation】Fix by screws or built-in joints, installation is a breeze. This 3D printer hotend kit includes Spider Hotend*1,....
- 【Wide Compatibility】Creality Spider hotend Fits for Ender 3,Ender 3 Pro,Ender3v2, Ender 5, Ender 2, Ender 6, Ender 7, Creality CR-10 ,CR-10S....
Check StockAuthentic Capricorn PTFE 1M Tubing and Upgraded Pneumatic Fittings PC4-M6 and PC4-M10 with Metal Teeth MK8 Hotend Silicone Sock and Replacement Nozzles Ender 3 / Pro CR-10 Series
- Capricorn PTFE tubing is designed with tight tolerances to dramatically improve print quality.
- The silicone sock included help maintain a stable hotend temperature for more consistent extrusion.
- 4 pneumatic fittings with METAL TEETH for superior performance to brass fittings with plastic teeth.
- Replacement hotend nozzles come in .2 .4 .6mm for fine detail or much faster larger part drafting.
- F1RST LAYER is a proud distriubtor of ONLY official Creality and Capricorn parts and accessories.
Check StockBCZAMD 3D Printing Upgrade Parts Ender 3 Direct Drive Extruder Conversion Kit Complete Set Requires No Firmware or Wiring Modification fit for Ender 3/ Pro/Ender 3X/ CR10 Series Printer Accessories
- 1. Fits perfectly on your creality series printers, include Ender 3 Pro, Ender 3, Ender 5, CR10.
- 2. Material: no 3d printed parts, all metal main plate, comes with a kit, so you need to assemble by yourself, install instruction, please reference....
- 3.This kit is a great little light kit that moves your extruder from the side with a bowden line to the top of your hot end. It obviously adds the....
- 4. Work well for most filament, expecial very good for flexible filaments, had no problem printing TPU with this setup..
- 5. Compatible with most extruder hotend, but you need to print a printing before install on V6 hotend, please reference on thingiver..
Check StockSovol SV06 All Metal Planetary Direct Drive Extruder Coming with Stepper Motor Without Fans and Auto Leveling
- This half kit of extruder comes without hotend, fans and auto leveling..
- We also sell the hotend and PEI build plate of SV06 on Amazon now. If you have spare needs you can order them..
- More SV06 accessories will be listed for sale on Amazon. If you want to order any accessories we have not sell on Amazon temporarily please let us know through Amazon message. All accessories of SV06 can be ordered from us..
Check Stock
Creality 3D Capricorn Bowden PTFE Tubing 1 Meter Tube Cutter XS Series with 5 pcs Nozzles for 1.75mm Filament Ender 3 Ender 3 Pro, Ender 5, CR-10,CR-10S 3D Printer
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend..
- Capricorn PTFE tubing ensures the highest quality prints at any given temperature. This XS series tubing is rated for high temperature printing, and also boasts greater lubricity leading to less friction, less slippage, and less wear. Great for flexible filaments! Also guaranteed with to have an inner diameter accurate to within 0.05mm, enabling fine tune retraction settings with more precision than ever before!.
- The perfect replacement kit if the your stock hotend has failed or constantly jams.Capricorn tubing provides enhanced precision for retraction settings, meaning less stringing on prints once calibrated..
- Comes with 1 Meter Tubing, five Brass nozzles and one cutter.
Check StockBIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts
- ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
- ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
- ⭐【Package Including】: 2 * 4mm PTFE Tube.
- Compatible with 100K NTC 3950 thermistors.
- Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
- ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
- ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check StockDragonfly Taichi Hotend Dual Extrusion 2 in 1 All Metal Hot End Double Feed 2 Color 2 Filament Extruder for CR10 Ender 3 Pro V2 Ender 5 Pro Plus CR10 V2 3D Printer Part
- ☀️【2 in 1 Dual Extrusion Hotend】Taichi hotend features integrated double feed port design, which meets the needs of two filaments or multi....
- ☀️【All Metal Hotend】The heatbreak of TAICHI hotend is made of 0.25mm thin-walled titanium alloy for high wear resistance, great heat....
- ☀️【Quick Nozzle Changing】The titanium alloy support screws of TAICHI hotend can reach low heat conduction and excellent heat insulation so as....
- ☀️【Conical All Metal Heatbreak】TAICHI’S conical designed all metal heatbreak fit closely with heatsink so that it’s heat dissipation is....
- ☀️【Compatible with All Filaments】TAICHI hotend is compatible with all thermoplastic filament including typical composite fiber filament like....
Check StockHAWKUNG 41 Pcs 3D Printer Accessories Kit, 10 Nozzle + 3 Heater Block + 3 Throat Tube + 3 V6 Silicone Socks + 10 Cleaning Needle + Other Parts for V6 3D Printer 1.75mm Extruder Hotend
- Contains all you'll need to upgrade your standard E3Dv6 hotend to the new Sock & Thermistor Cartridge Block.
Check StockArtillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer
- 1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not for V1) 3D printer.
- 2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level.
- 3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock..
- 4.Direct drive extruder, great support for flexible filament..
- 5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase..
Check Stocksupregear Sock Aid Kit Wider Sock Stocking Slider Sock Remover Shoe Helper with Long Shoe Horn Dressing Aid for Women Men Elderly Pregnant 34 Adjustable Cords Easy on Easy Off
- Try our SupreGear professional sock aid kit that specially designed to help put on and take off socks or stockings easily for people with difficulty....
- Kit includes a sock aid with foam handles, a sock remover, and a long shoe horn, helping you quickly and easily put on and take off socks and shoes.
- Made of ABS material, the sock aid kit is lightweight, durable, and comfortable to use.
- the sock remover and shoe horn are detachable for easy storage.
- Feature soft foam handles for easy grasping and adjustable rope for desired length.
- also includes a foam pad to keep sock from slipping.
- Use Instruction: (1) pull sock or stocking over the end of the Sock Aid.
- (2) place Sock Aid in front of your foot.
Check Stock
