Categories

Best Hp Horizontal Shaft Engine

212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40/41/420 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

  • Package Included: 1 x 3/4″ Driver clutch bore, 1 x Overall Diameter 6″ (5/8″ driven pulley), 1 x 10 Tooth Sprocket for #40 #41 #420 Chain (Chain not included), 1 x Drive belt, 1 x Plastic Assy Cover, 1 x Full Mounting hardware Kit, 1 x Aluminum Mounting Bracket Plate. (As Pictures Shown).
  • Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. 3/4″shaft with flat key.
  • Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton and clones, Kohler, Lifan, Robin, and Tecumseh motors.
  • Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM.
  • however, this can be adjusted from Minimum 1200 RPM – Maximum 3100 RPM by changing out springs (not included) and other adjustments.
  • Replace Part Number: Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, 203814A 30-75.
Check Stock

OEM Technologies 90026 Vertical Axial Cam Replacement Pressure Washer Pump Kit, 3100 PSI, 2.4 GPM, 7/8\ Shaft, Includes Hardware and Siphon Tube, for Residential and Industrial Gas Powered Machines

  • [Reborn Your Pressure Washer] YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3300 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2900-3300 PSI and fit most 212-240cc 7HP-8HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
  • [Extended Durability] High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum and SOLID BRASS HEAD for protection against rust, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine..
  • [Easy Start] Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in action as quickly as possible, Set up in 5-10 minutes!.
Check Stock

YAMATIC Pressure Washer Pump Horizontal 3/4\ Shaft 3000 PSI @ 2.5 GPM Universal Pump and Original Engineering for Most Brand gas engine power washer

  • 【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3000 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2600-3000 PSI and fit most 180-225cc at 6HP-8.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more..
  • 【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 120 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
  • 【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..
  • 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine. Each kit includes a siphon tube with filter, mounting bolts, shaft key, and instruction booklet to get your machine back in act....
Check Stock

Spree compatible replacement for Spree Predator Harbor Freight Generator 4000W / 3200W 6.5 hp air filter set

  • Replacement filter set for Harbor Freight generator 4000/3200W with 6.5 HP horizontal shaft engine.
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ...andard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft only!!! Some Excell units have the 7/8″ shaft and this pump will not work!**.
Check Stock

SurmountWay 3200PSI Pressure Washer Pump Horizontal 3/4" Shaft Replacement Power Washer Pump 2.4 GPM for 309515003,308418007, K2400HH (Horizontal)

  • 【Fit 3/4″ Shaft Horizontal Pumps】Fit Most 3/4″ Shaft Horizontal Crank Pressure Washer Engines, brands including Honda GCV , Generac, Briggs.
  • 【Pressure Washer Pump】Direct drive horizontal axial pump fits most horizontal 3/4″ shaft power washer: Could work at wide range from 2900 to 3200 PSI, best performance at 3000PSI and 2.4GPM. Good replacment for horizontal pressure washer pumps..
  • 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine..
  • 【Easy to Install】When installing, please ensure that the keyway is installed before running your pressure washer..
  • 【Sale and After-Sale Service】The provides a convenient connection to most 3/4” diameter shaft, if you are not sure your high pressure washer could fit or not, please inform us your engine model, install size, we would like to service you..
Check Stock

BILT HARD 420cc 15HP Gas Engine with Electric Start, Horizontal Shaft 4 Stroke OHV Gas Motor, Gas Powered Multi-Use Engine

  • POWERFUL ENGINE - Our 420cc displacement 4-stroke horizontal cylinder gas engine has a max torque of 19.56ft.lbs @2500RPM, max 3600 RPM speed, 15 maximum horsepower, 1.7 gal fuel tank. Built to meet & exceed industrial grade quality standards & provide dependable performance. The engine is shipped dry so make sure you add gasoline and engine oil correctly before starting (not included)..
  • SHAFT SPECS - 1 in Diameter, 3.48 in Length, end tapped with 3/8 in.-24 UNF.
  • Mounting pattern 7.7L x 4.06W-4.09W in. Durable design runs quiy and provides smooth operation.This engine spark plug system can take Torch: F6TC spark plugs, with a clearance of: 0.027-0.0.31 in. The engine runs on a minimum 87+ unleaded gasoline (10%003e ETHANOL recommended)..
  • SAFETY & WIDELY APPLICATIONS - Built-in Force Air-Cooled and Splash Lubrication System, keeping the motor cool during extended use of time and ensure the operator's safety. A low oil shutoff functionality turns the engine off to prevent serious damage or failure. It's the perfect replacement engine for a pressure washers, cement mixers, compressors, mowers, log splitters, vacuums, tillers, water pumps, chipper/shredders and blowers..
  • GREAT REPLACEMENT - Our 420cc 15HP Horizontal Engine is a great replacem....
Check Stock

BILT HARD 301cc 10HP Gas Powered Engine, Horizontal 4 Stroke OHV Gas Motor, Shaft 1" Diameter, 3.48" Length, 1/4" Keyway, Replacement for Go Cart, Compressor, Log Splitter, Pressure Washer

  • ...rial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
  • The engine runs on Unleaded 87+ octane Gasoline (10% or less ETHANOL recommended).
Check Stock

AlphaWorks Gas Engine 7HP Motor Horizontal 4 Stroke OHV Recoil Start 3600RPM 8.85Ft-Lbs/12Nm Torque 3/4\ x2.43” Shaft 3/16\ Keyway 5/16”-24 UNF End Tapped Go Kart Log Splitter EPA/CARB Certified

  • ...que & high RPM Speeds. Built to meet & exceed industrial grade quality standards & provide dependable performance. Manufactured to OSHA/ISO Regulations, EPA3 LCRPS.2121GC-010) / CARB(U-U-169-0418) Certified & Approved, making this a solid choice for the everyday Hard Working American!.
  • GEARHEAD SPECS - Our 7HP 209cc Horizontal Cylinder 4 Stroke OHV Recoil Starting Gas Engine has a Max Output Power/Speed of: 4.3kW/3600RPMs & 8.85Ft-Lbs/12.4Nm of Torque @2500RPMs. Counterclockwise Rotating PTO Ball Bearing Support Shaft Dia. of: 3/4" x 2.43”, 3/16" Straight Keyway & 5/16”-24 UNF End Tapered. Compression Ratio of: 8.2:1, Bore x Stroke of: 74.5mm x 48mm. Valve Clearance (Cold) Intake: 0.05-0.10mm & Exhaust: 0.05-0.10mm. Universal 4 Bolt Mounting Pattern: 6.38"/162m x 3.17"/80.5mm..
  • SUPERIOR PRODUCT INTEGRITY - The engine is designed to ensure the operator's safety.
  • Always operate the machine according to directions in the user manual, always wear the appropriate ANSI standard hand and eye protection (ENGINE OIL NOT INCLUDED, MUST ADD UPON UN-BOXING).
  • The engine runs on Unleaded 87+ octane Gasoline (10% or less ETHANOL recommended).
  • SAFETY & PROPER USE - The engine is designed to ensure the operator's safety. Always oper....
Check Stock

Axial High Pressure Washer Pump 2700 psi 6.5 HP 3/4" Shaft fits Cat General AR

  • Power Washer Axial Horizontal Pump series 15 Full Brass Head.
  • 3/4 Inches shaft suitable for engine 5.5 and 6.5 HP like GX160.
  • PLUNGER SEALS Germany Parker Include detergent injector and Thermal relief valve.
  • Output:M22 -14mm Standard Input: Garden hose connection.
Check Stock

Sea Eagle MM3 Motormount for SE8 and SE9 Inflatable Boats

  • For use with Sea Eagle Inflatable SE8 and SE9 Boats models produced after 1985.
  • Solid yet light and easy to assemble. Marine grade hardwood plywood with waterproof glue, It can carry a 3 hp engine on the SE-9, and a 2 hp engine on the SE-8.
  • Gas motor 3 hp max (45 lbs. max weight, 20" shaft minimum).
  • Electric motor 70 lbs. thrust max (45 lbs. max weight, 26" shaft minimum).
  • Fits models produced after 1985. Motormount only. Boat not included..
  • Made with Marine grade hardwood plywood with waterproof glue.
Check Stock

JMCHstore Stage 1 Performance Kit for Coleman CT100U CC100X 98cc, Predator 79cc 3HP Engine, Massimo MB100 79cc Mini Bike, SK100 CK100 Go Kart, 154F 3.0 hp OHV Engine Parts, Red (Red)

  • JMCHstore Red Stage 1 Performance kit for Coleman CT100U CC100X 98cc Mini Bike.
  • For Predator 3 HP (79cc) OHV Horizontal Shaft Gas Engine.
  • For Coleman SK100 CK100-S Go kart , 154F 3.0 hp OHV Engine Parts.
  • Higher Top Speed. Thanks to High Flow Air Filter & Velocity stack, Not only the intake air become smoother but also speed up. W/ massive amount of intake air , you should experience an increased top speed of about 5 -10 mph..
  • Performance Carb W/ Rich main jet. With the added air flow, the more rich main jet is mandatory for optimal engine performance. But now Coleman is equipped EPA Carb w/ non-replaceable main jet. So we provide this old version carb which can replace to rich main jet (Provided ) Direct replacement for stock EPA carb..
Check Stock

Flieeya Polaris RZR 1000 XP & S Drive Clutch Aluminium Alloy Powersports Clutch Compatible with 2014-2020 RZR 1000 XP XP4 & 2016-2019 RZR 1000-S Models, with Weights & Spring

  • Go Kart Clutch 3/4 Bore 12T for 35 Chain, Perfect for Go Kart, Minibike and Fun Kart Engine 3/4 Bar.
  • Centrifugal Clutch Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh Engines 2-6.5 HP with 3/4” shaft.
  • Mini Bike Clutch Fits Any Other Engines with 3/4 Crank Shaft and 3/16” Keyway, Most 5.5 HP Clones, 6.5 HP Clones and 4-7HP Motors in All Brands.
  • Double Protection: Predator Engine Go Kart Clutch Bolt,Washer,Screws and Allen Wrench are All Included. Mounts Onto Crankshaft Using Bolt and Washer on the End of the Crankshaft and Using Screws Set for Double Secures Your Clutch to the Engine.
  • OEM Replacement Quality: Made of Quality Iron Material, Which is Lightweight, Portable, Sturdy, Durable, Maximum Torque, Wear-resisting and Fast Heat Dissipation.
Check Stock