Wiha 200mm VDE Needle Nose Pliers

  • Made from high quality forged CV tool steel 50/52HRC.
  • Soft vinyl grip handles are oil and solvent resistant.
Check Stock

TEKTON Mini End Cutting Pliers | PMN64001

  • Blades are finely beveled and induction-hardened to HRC 60-63 to produce a refined semi-flush cut.
  • Cuts soft wire like copper, aluminum, brass, and silver (14-38 AWG) and trims plastic parts.
  • Recessed coil spring gently assists opening to minimize hand fatigue.
  • Wide, flat handles with slim, nonslip grips provide comfortable fingertip control.
  • Total Length: 4.1 in., Width: 3.7 in., Height: 0.6 in., Cutting Capacity: Soft Wire 14 - 28.
Check Stock

Wiha 32670 Adjustable Water Pump Pliers Set, 3 Piece

  • Made from high quality forged CV tool steel 50/52HRC.
  • Soft vinyl grip handles are oil and solvent resistant.
Check Stock

4 Pieces Egg Beater Stainless Steel Mini Spring Coil Whisk Silicone Whisk Hand Held Sauce Stirrer Blender Milk Frother Foamer Coffee Mixer

  • Reliable quality: crafted by stainless steel and silicone, this mini whisk spring egg beater set contains the steel coil and silicone coil, which are....
  • Classic design: featuring with a short flat handle, the small egg whisks can move smoothly across edge of bowl, getting into the corner easily.
  • Convenient to use: silicone coil magic whisk can be applied on non stick surfaces container, no scratches, and the high heat resistant to 475 degrees....
  • Easily using and cleaning: ergonomic handle gives you a secure grip for any mixing task, steel coil whisk is a nice handheld manual milk frother....
  • Package include: 1 package comes with 4 pieces of whisk spring egg beaters in your package, 2 in steel coil and 2 in silicone coil, convenient kitchen....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This heavy-duty rebar cutter bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending or cutting rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

National Hardware N278-879 V7721 Corrugated Joint Fasteners in Bright, 30 pack

  • Siding Nails 2-1/4-Inch x .092-Inch, 15-Degree Collated Wire Coil.
  • Full round head and ring shank, hot dipped galvanized fiber cement material offers superior protection in all pressure treated lumber.
  • Material - HDG steel (Hot-Dipped Galvanized Steel).
  • 2-1/4-Inch x 0.092-Inch. Also know as siding nails 2-1/4In, siding nails coil, coil nails siding, coil nails 15 degree, coil nails 2-1/4In.
  • Package includes 12 x 300 count siding nails.
Check Stock

TreeWorks Chimes Percussion Effect (TREcoil)

  • THE SPRING THAT SINGS | Simply use the included stainless steel beater to achieve an array of metallic effects including a finger cymbal ding, a dark metallic coil hit, and a long scrape of the coil. Playing only takes one hand, so it's easy to mute or stretch the coil for even more sound manipulation..
  • PROUDLY MADE IN THE USA | The TREcoil is made from a 1/4" rod of solid Aluminum/Titanium alloy that is hand-bent and tested by ear in our workshop just north of Nashville, TN..
  • FORGED FOR SUPERIOR STRENGTH AND SOUND QUALITY | Each coil undergoes high temperature heat treating to harden the metal and to add depth to its sound. The mantle secures the coil in place with a super durable polyurethane coated braided steel cord to keep your triangles hanging year after year..
  • A SAFE AND CONVENIENT MOUNT | The coil is removable and interchangable with other hanging instruments, making this an invaluable addition to your percussion section. The included stainless steel beater slides easily into a hole drilled in the top of the mantle for storage between uses..
  • DIMENSIONS | The TREcoil is 5" in diameter and 19" inches in length and comes with one Light Triangle Beater (TREbtr-LTE) that is 8 1/4 x 3/8 x 1/4 inches in dimension..
Check Stock

Chroma Haiku Damascus 8-Inch Chef's Knife

  • Made from 32 layer Damascus an VG-10 core steel with a hardness of HRC 59-60.
  • Sharpened, Polished, And Mounted In Japanese Cherry Wood Handles Fixed In Place By The Signature Japanese Meguki.
  • The most refined and unbelievable sharp knife line you can buy online.
  • Damascus Blades Perfectly Fit The Classic Character Of Chroma Haiku Knives! Sumikama Is The Foremost, And In All Probability, The Best, Maker For Damascus Kitchen Knives In Series.
  • Sumikama Provides Chroma In Japan With Unbelievably Sharp Blades Made From 32 Layer Damascus An Vg-10 Core Steel With A Hardness Of Hrc 59-60.
Check Stock

Handmade Damascus Steel Chef knife Blank Blade Kitchen Knife fixed blade knife 9045rd

  • ✅ " JNR Traders" Premium Quality Damascus Steel Chef Knife Blank Blade. This Genuine Handmade Damascus Steel Blade is a Solid Built , has excellent edge retention for lasting durability and is Perfect for cutting .....
  • ✅ KNIFE DIMENSIONS: Overall length: 10.50 Inches . Blade length: 06.00 inches . Handle length: 4.50 inches . Blade thickness is 2.5 mm...Hardness is 56±2 HRC..
  • ✅ MATERIAL : Blade Material is Damascus Steel (4340 and 1095), Hardness of the Blade is HRC 56±2 , sharp edge with 12 degree angle sharpening.
  • ✅ APPLICABLE OCCASIONS: Suitable for Christmas Gift , Birthday Gift , Wedding Gift , Thanksgiving Day and also for Cooking , camping, Cutting Chopping , and outdoor Cooking.
Check Stock

WORKPRO 14-Inch Bolt Cutter, Tri-Material Handle with Comfort Grip, Chrome Molybdenum Steel Blade, for Rods, Bolts, Rivets, Wires, Cables and Chains

  • WORKPRO 14-inch Bolt Cutter: Your handy tool to handle a variety of cutting jobs with ease. Cutting Capacity: HRC≤42: 7/32-inch(5mm Maximum).
  • HRC003c25: 1/4-inch(6mm Maximum) Note: Cutting locks is not recommended.
  • Strong & Durable Construction: Drop forged chrome molybdenum steel jaw with sandblasting treatment for long life. Hardened center-cut blades with HRC56-60 hardness deliver superior cutting performance..
  • Ergonomic Design: Tubular steel handles for maximum leverage, with anti-slip soft tri-material rubber grips offering comfort and control during extended use..
  • Compound Action: By combining handles with hinges that transfer power to the jaw and cutting blades, compound cutting action generates more cutting force to cut through hard materials..
  • Extensive Uses: This heavy duty bolt cutter is ideal for cutting rods, bolts, rivets, wires, cables and chains..
Check Stock