Categories

Best Hss Reduced Shank Drills

100pc 1/8\ Shank Rotary Tool Accessory Set for Dremel (Sanding | Polishing | ...

  • Universal fit for all rotary type tools including Dremel | 1/8th Shank.
  • Sanding Band, Rubber Mandrel for Sanding Band, Fiber Glass Cutoff Wheel, Abrasive Wheel,.
  • 15pc Soft Wool, 9pc Pink Aluminum Oxide, 9pc Green Aluminum Oxide, Polishing Woolen Wheel.
  • 30pc Soft Wool, 10pc Hard Wool, Silicon Cutoff Wheel, Aluminum Oxide Cutoff Wheel,.
  • Stainless Steel Brush, Mounted Abrasive Point, Diamond Burs, HSS Burs/ Drills, HSS Burs/ Drills.
Check Stock

COMOWARE Impact Screwdriver Bit Set with Titanium Drill Bits - Quick Release Twist Drill Bit Set with Tough Case, Impact Driver Bit Set Total 35Pcs

  • ...aintenance, and most general repairs..
  • 【Complete Specifications】A complete set of screwdriver bits and titanium drill bits which is most commonly used. Anytime ready to satisfy your different needs..
  • 【Wide Applications】Our drill bits set can be widely used on electric screwdrivers, hand screwdrivers, cordless drills, electric drills, air drills and so on. The bits are also impact-rated and for use in ¼” hex impact drivers (sold separately)..
  • 【HSS-Ground Titanium Coating】Classic HSS construction with titanium coating to sustain long life. The cutting edge is hardened and honed for drilling accurate and clean holes in metal, wood and plastic, Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel..
Check Stock

1/2” Reduced Shank Drill Bit, HHS-G Black Oxide Twist Dill Bit Metric Size Steel Metal Plastic Wood（16mm）

  • Common flute and overall length for minimal adjustment during tool changes.
  • Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge.
  • Hex shank, which is suitable for most drills,fit for electric screwdrivers, hand screwdrivers, electric drills, air drills and so forth..
Check Stock

IRWIN Drill Bit Set, General Purpose, 3/8-Inch Reduced Shank, 29-Piece (60148)

  • These drill bits are constructed of M-2 high-speed steel for strength, as well as heat and wear resistance.
  • Each drill bit has a standard 118° point for use in metal, wood and plastic.
  • 3/8-inch reduced shank fits most 3/8-inch drills.
  • These IRWIN drill bits come in a metal index case.
  • Includes 1/16″ through 1/2″ drill bits in 1/64″ increments.
Check Stock

NordWolf 12-Piece Metric Step Countersink Cone Drills with 1/4 Hex Shank Multi Drill Saw & Automatic Center Punch Titanium HSS Set in Storage Box

  • 【Step Drills and Cone Drill】3 piece 5/9/14 step drills (4-12/20/32mm) and 1 piece cone drill (8-20mm). Laser marking of step size provide convenient and accurate drilling.
  • 【Countersink Drill Bits】6 piece countersink drill bits: 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm - 90° point, three cutting edges, ideal for deep countersinking.
  • 【High Quality】All drills are HSS Titanium coated, come with 1/4" (6.35mm) hex shank, and are precision ground, heat treatment, and hardened for consistently accurate drilling or enlarging holes into sheet & non-ferrous metals, wood and plastics.
  • 【Multi-Drill Saw & Center Punch】Multi drill saw (6mm) can be used in combination with drills, saws, rotary files, reamers and routers. Automatic brass center punch provides high impact spring-loaded strike when pressed against working surface.
  • striking force is adjustable by turning cap.
  • 【Ergonomic Storage Box】Insert hex shank into black plastic holder at 10°-15° first, then push head of product down to fix firmly. Box can be re-used to store other tools by taking out foam inlay.
Check Stock

NEIKO 10218A Countersink Drill Bit Set for Wood and Metal, 1/4” Tri-Flat Shank, 5 Piece Countersink Bits, M2 High Speed Steel

  • PRECISION MACHINED TIPS: These countersink drill bits come with 1/4" tri-flat shanks with a precision-ground 82-degree tip for sinking holes into wood, machinable metals, mild steel, fiberglass plastic, and more and fit common handheld power drills..
  • M2 HSS MATERIAL: Each metal countersink bit is made of high quality M2 HSS material for extended drill bit life and efficiently drills countersinks to help create strong joints between screw and material..
  • FIVE-FLUTE DESIGN: Each of the 5 counter sink bits utilizes a five-flute design that reduces vibration for smoother drilling as found in woodworking with a 1/4-inch shank that allows easy gripping..
  • BIT HOLDER CASE INCLUDED: Each countersink drill bit set comes with an aluminum case for carrying and easy storage..
  • BIT SIZES: Each countersink tool set contains 1/4.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • ...zes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

IRWIN Marples Forstner Bit, Wood Drilling, 1-Inch (1966900)

  • Drills flat-bottomed and pocket holes in significantly less time than traditional Forstner bits.
  • Features optimized ultra-sharp knife edge design specifically engineered to cut through hard and soft woods smoothly and efficiently.
  • Easily drills high-quality flat-bottomed and pocket holes with a fine, smooth finish.
  • Reduced shank fits 3/8" and larger drills and drill presses.
  • Ideal for fine woodworking, cabinet-making, and more.
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • ...ersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink dri....
Check Stock

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

  • Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life.
  • 6 HSS core drills with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16, all with 1 inch cutting depth.
  • CNC-machined high precision cutters with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
  • Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack.
  • Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench.
Check Stock

Frank O. Gehry: The Complete Works

  • Easily Drills High-Quality Flat-Bottomed And Pocket Holes.
  • Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
  • Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
  • Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Check Stock

IRWIN Marples Forstner Bit Set, 14-Piece (1966893)

  • Easily Drills High-Quality Flat-Bottomed And Pocket Holes.
  • Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
  • Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
  • Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Check Stock

NEIKO 10235B 13/16” Drill Bit for Metal, 1/2” Shank, Silver and Deming, 135° Split Point, High Speed Steel Drilling Bit for Metals, Wood, Plastics, Composite Materials

  • HSS HIGH SPEED STEEL: The high-speed steel material these bits are made of are designed to ensure sharp and fast execution in any material for clean results while making the bit long-lasting, durable, and wear resistant..
  • 135° SPLIT POINT DRILL TIP: The 135-degree split point increases cutting speed with self-centering with no pilot hole and prevents walking while clearing chips and particles faster..
  • 1/2” TRI-FLAT SHANKS: The tri-flat on the shanks of these drills are constructed for tighter chucking to maximize the hold to create precision holes..
  • CHISELED PRECISION CUT: Each of the 13/16 inch drill bits have a precision manufactured cut for accurate drilling and the all-purpose reduced shank has a 1/2-inch chiseled diameter to fit any type of drill chuck with a precise and snug fit..
  • DRILLING TYPES: This 13/16-inch silver and deming drill bit is ideal for drilling into steel, copper, aluminum, brass, wood, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, and composite materials..
Check Stock