Best Hss Shank Cutters
KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4
- ...ength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
- 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
- 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
- arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
- with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
- HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
- Packed in high quality carrying case. Please note that it shows "HSS M3" on the carrying case but actually it is made of HSS M42 with cobalt 8%. You could see it on the hole saws.DescriptionHSS M42 with cobalt 8% bi-met....
Check StockS&F STEAD & FAST Spot Weld Cutter Kit 3/8 Threaded Shank Depth of Cut 1/4 Cutting Diameter 5/16” 3/8 7/16” 1/2 9/16” 5/8 3/4 Annular Cutter Set for Hand Drill Small Angular Cutter Bits
- PREMIUM HSS STEEL Drill bit cutters with thick walls made of super hard M2AL High Speed Steel (HRC 66), designed for wear resistance and superior performance.
- FAST CUTTING AND LONG LIFE Premium spot weld cutters drill 3 times faster than twist drill bits or double sided cutters and last much longer.
- ASSORTMENT Small annular cutters with 3/8” threaded shank, cutting diameter of 5/16”, 3/8", 7/16”, 1/2", 9/16”, 5/8, 3/4", suitable for cutting up to 1/4” depth.
- APPLICATIONS Spot face cutter can be used not only for spot weld cutting in auto body panels but also for general hole cutting in sheet metal, piping, conduit, electrical, automotive and HVAC work. Materials suitable for cutting: steel plate, aluminum, cast iron, stainless steel, plastic, laminated materials.
- STURDY CASE Includes Cutter x 7, Arbor x 1, Pilot pin x 2, Center punch x 1, Small washer x 1, Large washer x 1, Hex wrench x 1.
Check StockRocaris 23-Pack Woodworking Chamfer Drilling Tool, 6pcs 1/4\ Hex 5 Flute 90 Degree Countersink Drill Bits, 7pcs Three Pointed Countersink Drill Bit with L-Wrench, 8PCS Wood Plug Cutter, and Automatic
- Package included 23pcs woodworking chamfer drilling tool, 6pcs 1/4" Hex Shank HSS 5 Flute 90 Degree Countersink Drill Bits, 7pcs Three Pointed High Speed Steel Countersink Drill Bit with One L-wrench for Wood Drilling or Woodworking Chamfer, 8pcs wood plug cutters drill bit set and 1pcs Automatic center punch for marks workpiece with a dimple, creating a starting point that prevents screws and drills from wandering.
- 3/8" shank 8pcs wood plug cutter drill bit set made of durable carbon steel material,used for tapered 1/4.
Check StockFein JME Holemaker III High Powered Endurance Magnetic Base Drill with 2\ Maximum Drilling Depth - 3/4\ Straight Shank, 1,100 W, 590 RPM - 72705961090
- The optimal drilling speed designed for use with carbide and hss cutters on the toughest jobs and applications.
- Effective solution for customers drilling harder materials.
- Improved magnet for easier placement and better holding power on thinner material.
- Cost effective drill for running with Carbide cutters which offer longer life, higher cutting rate and capable of cutting harder materials. Also running with standard HSS cutters with great results..
- Extemely wear resistant concept with durable newly designed polyurthane motorhousing for use in industry and manual trades..
- Side-reversible feed handwheel with hexagonal hub.
- Extemely lightweight drill yet powerful enough for heaviest drilling applications..
Check StockWkstool 40mm Blade Diameter,90 Degree,Industry Chamfering Chamfer Metal Countersink End Mill Cutter Drill Bit,High Speed Steel,Deburring Tool Set Ø40mm×12mmShank×85mmOAL 1Flute
- 40mm blade diameter × 12mm shank diameter × 85mm OAL,Material:Uncoated HSS M2AI,Round Handle.
- 1Flute chamfering with 90° Countersink Angle on the point for sharp and precise countersinking.
- Can be use both at home or industry.Suitable for Aluminum,Brass, Bronze, Iron, Plastic,Stainless,thin iron plate,wood,carbon steel,insulation board,or PVC board etc.
- High-precision,Manufactured to exacting tolerances,Full grinded,high abrasion resistance,best obtain accuracy and fine finish..
Check StockFTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking
- ...M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
- Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
- Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits....
Check StockAOTE-PITT Cordless Rotary Tool Kit, 4V Mini Rotary Tool with 72 Pcs Rotary Accessory, 3-Speed 18,000 RPM Multi-Purpose Power Tool with USB Charge for Sanding, Polishing, Drilling, Engraving, DIY
- ...rk site when the rotary tool is running. It weighs 0.30 lbs only..
- 【YOU WILL GET】4V cordless rotary tool and 72 pieces accessories Including Diamond Wheel Points x 6,Grinding Stones x 5, Sanding Bands Small x 12, Mandrel for sanding bands x 1, Felt Wheels x 6, Mandrel for Felt Wheel x 1, Pen Nylon Brush x 1, HSS Cutters x 2,HSS drill bits x 1, Mandrel for Cut-off Wheels x 1, Sanding Discs x 30,Felt Wheel Tips with Shank x 2, Rubber Grinders with Shank x 2, Charging Cable x1, Accessory Case x 1, Lettering Templates x 2, User Manual..
Check Stock8pcs Wood Plug Dowel Maker Cutting Tools Hole Cutter Tenon Carbon Steel Metric Straight and Tapered Shank Drill Bits Set 5/8' 1/2' 3/8' 1/4' Taper Claw Type HSS Cork for Woodworking Tool
- This set includes 4 standard plug cutters and 4 four-tooth chamfered cutters..
- Chamfered cutters make tapered plugs to fill countersunk holes..
- Use standard cutters to eliminate imperfections in wood.8 Piece plug cutter set makes perfect plugs for counter-bored holes..
- The cutter set achieves excellent finish when using same timber..
Check StockFTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits
- ...ountersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
- Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
- Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check StockThis is Not A Drill Funny Carpenter Woodworking Mens T-Shirt
- ... 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
- Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
- DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
- THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 ....
Check StockWhitney Tool 355070 Keyseat Milling Cutter Style 121 Carbide Tipped 507 10 7/8 Cutting Diameter 5/32 Cutting Width Stagger Tooth
- Carbide tipped, stagger tooth style 121 #506 (8) 3/4" X 5/32".
- Carbide tipped cutters cut 3 to 4 times faster than HSS cutters.
- Increase production and reduce overall machining costs.
Check StockAccusize Industrial Tools R8 to 3/4'' Weldon Shank for Annular Cutters use on Bridgeport Milling Machine, Mc08-0034
- R8 to 3/4'' Weldon Shank Arbor for Milling Machine.
- for Annular Cutters use on Bridgeport Milling Machine.
- Fit with Any Size Annular Cutters which Have 3/4'' Weldon Shank.
Check StockATOPLEE Metric Thread Tap, M12 HSS 6542 Right Hand Thread Tap (M12X1.25/M12X1.5/M12X1.75, 3pcs)
- Type:M12*1.25 HSS/M12*1.5 HSS/M12*1.75 HSS.
- Thread Diameter:12mm, Total Length:88mm.
- Shank Diameter:9.0mm, Pitch:1.25mm/1.5mm/1.75mm.
- Square Head Size:6.8x 6.8mm (L*W),Net Weight:0.045 kg.
- Package Included:3pcs Metric Right hand Thread Tap.
Check Stock