Categories

Best Hss Spiral Point

amoolo Titanium Drill Bit Set 60 pcs Premium 4341 HSS Micro Drill Bits for Wood Metal Steel Plastic Aluminum Alloy 3/64 -1/8

  • 【COMBO SET OF 60 PCS】60 Pcs twist drill bit set with portable plastic case. 6 most commonly-used sizes (3/64", 1/16", 5/64", 3/32", 7/64", 1/8")....
  • 【PREMIUM HSS TITANIUM Coating】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set.....
  • 【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and....
  • 【MULTIPLE APPLICATION】Small Drill bits for soft metal, wood, plastic, steel within 10mm thickness, aluminum alloy and other soft metals. Ideal for....
  • 【90 DAYS WARRANTY】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

amoolo Hex Shank Drill Bit Set (16 Pcs), Premium 4341 HSS Titanium Impact Hex Drill Bits for Wood, Steel, Metal, Plastic, Quick Change Design (1/16”-3/8”)

  • 【COMBO SET OF 16 PCS】12 most commonly-used sizes (1/16",5/64",3/32",7/64",1/8",9/64",5/32",3/16",7/32",1/4",5/16",3/8") to satisfy all needs, additional piece of 1/16", 5/64", 3/32" and 1/8"for easy replacement. Total 16 Pcs hex shank twist drill bit set come with a portable plastic case for easy select, storage and carry..
  • 【ADVANCED HSS TITANIUM COATING】Industrial grade 4341 high speed steel drill bits set, harder than 4241 HSS and has stronger cutting capacity. Titanium coating increases wear-resistance and durability..
  • 【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral flute discharge scraps quickly, reduce friction and heat, therefore provides a faster, cooler and more efficient drilling performance.
  • 135° Split Point with straight shank prevents slippage and makes drilling stable and precise. No center punch is needed..
  • 【QUICK CHANGE】1/4"(6.4mm) hex shank base well fits into majority pistol drill and drill press, more easily and securely installation without slippage and shedding..
  • 【MULTIPLE APPLICATION】Small Drill bits for wood, plastic, steel plate ≤ 5mm, aluminum alloy and other soft metals..
Check Stock

Greenfield Threading 330133 GT/VTD SPGP D5 2FL GP Plug Spiral Point Tap, M8 x 1.0 mm

  • Greenfield Threading Plug spiral point tap: M8x1.0: Limit D5 number of flutes: 2. HSS substrate, bright finish..
  • Made from Premium High Speed Steel and Bright finish.
  • Made to Table 302A. 1.0 Threads Per Inch.
Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

  • Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
  • ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
  • ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
  • ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
  • ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check Stock

uxcell Spiral Flute Tap M6 Thread H2 Tolerance M35 Cobalt Titanium Plating HSS

  • Spiral flutes for better chip clearing process. Self-centering point, do not need assistant center drilling or center punching..
  • Complete hole drilling, tapping, deburring and countersink in one operation with power drill, saves labor and time. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron etc..
Check Stock

Meichoon Step Drill Bit Set Large HSS Spiral Groove 6-60mm 12 Steps Sizes, Cobalt Countersunk Drill Cone Drilling Tool Hole Cutting Enlarge Metal Sheet PVC Sheet Wood, Triangle Handle, DC18

  • HSS & Titanium Coating - High speed steel makes it last longer than others, titanium coating ensures easily cut through steel sheets, aluminum sheets, copper & plastic & wood board and many other types of sheet metal with ease..
  • It can automatically deburr holes while drilling to keep the drill bit clean..
  • A necessity for family or handyman or professionals - Perfect for home repairs and light jobs such as drilling holes in plastic, aluminum, copper and many other types of sheet metal..
  • Package includes: 1 x 6-60mm Spiral Groove HSS Step Drill (12 Steps: 6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm).
Check Stock

OCGIG 6-65mm Large Titanium Coated Step Drill HSS Spiral Groove Cone Drill Bit Hole Cutter

  • Material:：High Speed Steel(HSS) with Titanium Coated.
  • Self starting：no need for a pilot hole.Cobalt coated to reduce friction and run at cooler temperature..
  • Spiral Design：3 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-65mm HSS Groove Step Drill (13 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm).
Check Stock

Jerax tools M2 HSS Taper Chucking Reamer 4pcs Set 3/8 1/2 5/8 3/4 Fit 3/8 or 1/2 Shank Chuck Spiral Flute Bridge/Construction Reamer for Steel Alloy Aluminum Wood Plastic

  • [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability..
  • [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability..
  • [Tapered point]: allow entry into overlapping holes..
  • [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8"(10mm) thick mild steel for impact driver or 1" (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed..
  • [Sizes]: 4 pieces, including 3/8" (fit 3/8'' shank chuck), 1/2", 5/8" and 3/4" (fit 1/2'' shank chuck)..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

Gunsmithing At Home For Beginners And Novices

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer & JT833H 10-Amp 8-Inch Spiral Benchtop Jointer with Extendable Table

  • Product 1: Spiral cutterhead utilizes 26 staggered and rotatable HSS blades for a clean, smooth finish.
  • Product 1: Onboard material removal gauge informs users about the cutting depth of each pass.
  • Product 1: Plane boards up to 6 inches thick and 13 inches wide.
  • Product 1: 15A motor generates 10,000 RPM at a 26 feet per minute feed rate.
  • Product 2: Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish.
  • Product 2: Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches.
  • Product 2: Remove 0 to 1/8 of an inch of material with each pass.
  • Product 2: Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees.
Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

  • 【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

Topec 49pcs Screw Extractor/Drill Bit Set, Professional Remove Set for Removing Broken Studs, Bolts, Socket Screws and Fittings

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock