Categories

Best Hub Spindles

JDMSPEED 2 Trailer Idler Hub Kits 5 on 4.5 Replacement for Axle 1-1/16 Bearings 2000 lbs - 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Kits also include: 4x L44649 outer cone bearings, 2x Grease seals 1-1/16", 2x E Z lube grease caps with rubber plug.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Note: This hub fit straight spindles, not for tapered spindles.
Check Stock

LIBRA Set of 2 Trailer Idler Hub Kits 5 on 4.5 for 1-1/16 Straight Spindle 2000lbs Axles- 22016K

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 2,000 lbs trailer axle, for 1-1/16" straight spindle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 4x L44649 outer cone bearings, 2x Grease seals, 2x E Z lube grease caps with rubber plug.
  • pls noted, this hub fit straight spindles, not for tapered spindles.
Check Stock

RIGID HITCH INCORPORATED Pair of 5-Bolt On 4-1/2 Inch Hub Assembly AKRD-2200545 Includes 2 1-1/16 Inch Straight Spindles & Bearings

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub).
  • Spindles feature a ROUND 1-1/4" stock diameter with a bearing surface of 1-1/16 inch..
Check Stock

RIGID HITCH INCORPORATED Pair of 5-Bolt On 4-1/2 Inch Hub Assembly AKSQ-2200545 Includes 2 Square Shaft 1-1/16 Inch Straight Spindles & Bearings

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2", flange diameter 5.56" and measures 4-1/4" tall (through center of hub).
  • Spindles feature a 1-1/2" SQUARE stock diameter with a bearing surface of 1-1/16 inch..
Check Stock

Southwest Wheel R40842 42 Spindle & 8-6.5\ Bolt Circle Trailer Hub

  • Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts.
  • Fits both 1" and 1-1/16" diameter straight spindles.
  • Hub measures 4-1/4 inches tall (through center of hub).
  • 2,000 lbs capacity - 1/2-20 thread - 5 bolt on 4-1/2 inch bolt circle.
Check Stock

RIGID HITCH INCORPORATED Trailer Hub Kit BT-150-F 5 Bolt on 4-1/2 Inch Circle - Fits 1 and 1-1/16 Spindle

  • Complete assembly with bearings, seal, dust cap, cotter pin and lug nuts.
  • Fits both 1" and 1-1/16" diameter straight spindles.
  • Hub measures 4-1/4 inches tall (through center of hub).
  • 2,000 lbs capacity - 1/2-20 thread - 5 bolt on 4-1/2 inch bolt circle.
Check Stock

Southwest Wheel R40842X 42 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Pair of 1" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44643 1" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

Southwest Wheel R20484X 84 Spindle & 5-4.5\ Bolt Circle Trailer Hub

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

Southwest Wheel R30484X 84 Spindle &5-4.5\ Bolt Circle Trailer Hub

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2.
Check Stock

Southwest Wheel R30484X 84 Spindle & 5-5.5\ Bolt Circle Trailer Hub

  • Pair of 1-3/8" to 1-1/16" tapered spindles..
  • Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D.
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 5" bolt circle. Pilot diameter 2.59.
Check Stock

Yukon Gear & Axle (YA WU-04) Spin Free Locking Hub Conversion Kit for Dodge SRW Dana 60 AAM Differential

  • "locking hub conversion kit for '00-'08 dodge dana 60 and 9.25"" front, single rear wheel design".
  • the yukon worry free spin free kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races.
  • the result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon.
  • this hub kit also includes low-profile yukon hardcore premium locking hubs, giving you more driving selectability.
  • this kit includes new wheel hubs, spindles, high strength yukon 4340 chrome-moly outer axles, yukon hardcore premium locking hubs, timken bearings, high quality seals and all hardware for installation.
Check Stock

Southwest Wheel 7,000 lbs Trailer Axle Electric Brake Kit

  • Pair of 12" x 2" 8-6.5" bolt circle TruRyde hub and drums 25580 inner bearing 14125A outer bearing.
  • Pair of 12" x 2" TruRyde electric backing plates.
  • Works with Al-Ko, Dexter, Lippert,and Quality Trailer Axles. TruRyde parts are manufactured to automotive standard in ISO/TS-16949 registered factory..
  • Comes with TruRyde bearings, 2.25" ID seals, 2.125" ID seals, lug nuts, solid grease caps, ez lube grease caps, cotter pins, spindle washers, tang....
  • Built for 42 spindles with a 5 hole brake flange.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKRD-200044) Includes (2) 1 Inch Straight Spindles & Bearings

  • Pair of 1" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44643 1" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock