Categories

Best Hull Steel Plate

Ocean Kayak Malibu Two Tandem Sit-On-Top Recreational Kayak Sunrise 12-Feet

  • Enjoy sun and surf with a friend or a furry companion with the kayak's three seating positions, which support solo, tandem, or tandem paddling With a....
  • A pair of comfort Plus seats provide four-way adjustability, Generating a custom fit and greater slip prevention over molded seats..
  • Patented overlapping foot wells allow centre-seated paddlers to settle in and brace their feet comfortably..
  • The open, sit-on-top hull makes it easy to get on and off the kayak and includes a pair of molded-in handles and skid plate..
  • Measures 12 Feet long and 34 inches wide. Lifetime on the hull..
Check Stock

Trailer Bunk Glides (3' x 48') kit of 4

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Solid High Density Polyethene ½” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides.
Check Stock

Seachoice Bilge Pump Installation Kit for 1-1/8 in. Outlets, w/ 6 Ft. Hose, 2 Hose Clamps, and Thru-Hull Fitting

  • Complete installation kit for bilge pumps with 1-1/8 inch outlet.
  • Includes 6-foot black corrugated 1-1/8 inch ID hose.
  • Includes 2 (two) #10 stainless-steel hose clamps.
  • White thru-hull fitting with 1-7/8 inch flange.
  • Thru-hull fitting accommodates up to 1-1/4 inch hull thickness.
Check Stock

Trailer Bunk Glides (Kit of 2 Glides) (3' x 60')

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Kit of 4 ( less than 60" ) kit of 2 ( 60 " or longer ) Solid High Density Polyethene .45” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides ( less than 60 Inches ) or a kit of 2 ( 60 inches or longer ).
Check Stock

Thorn Folding Boat Cleat,Flip Up 4-1/2" Dock Cleat 316 Marine Grade Stainless Steel with Back Plate Pack of 2

  • HIGH QUALITY MATERIALS .Boat surface mount dock edge flip up cleat folding cleats made of 316 stainless steel casting, durable and high strength.Maximum corrosion resistance and durability in the saltwater environment.
  • WELL DESIGNED.These folding cleats simply fold-down when not in use.The fold away feature is a great design, No one will stub a foot or toe, nice smooth surface when not in use.At the same time ,smooth edge avoids cutting of rope or foot injury..
  • QUICK AND EASY TO INSTALL.Drill holes needed and slide the supplied stainless steel screws through the hull.Even no drilling or welding required. direct replacement for the old or broken one..
  • WIDE APPLICATION.Fashionable looking to match marine .Stainless steel dock cleat uses watercraft/boat/yacht,boat docks, decks, piers for tying up boats, kayaks..
  • PACKING WITH ACCESSORIES.We offer two types of screws for your choice(Bolts and screws ).You can install it as needed.And also packing include back plate to make Folding cleat more stable..
Check Stock

Trailer Bunk Glides 3" x 84" kit of 2

  • Fiberglass and aluminum boats, PWC and pontoons easily glide on and off Surfix Trailer Glides..
  • Kit of 4 ( less than 60" ) kit of 2 ( 60 " or longer ) Solid High Density Polyethene .45” thick glides provide full bunk support.
  • no more uneven spaced pads to leave marks on the hull. No thin skin to break down and expose a cost saving Injection molded honey comb or understructure to grind against the hull..
  • Low profile stainless steel wide pan head screws embrace the flat deep mounting pockets. No counter sunk screws to spread the plastic and work them loose or through the material..
  • Quarter-rounded top perimeter and square base provides snug butting and a no-snag transition between glides. Start the glides at the rear most edge of the bunk the quarter-rounded top will be the first contact to slide on the hull.
  • The bright white color allows you to easily see and wash off any sand or road dirt that can scratch your hull. Sold as a kit of 4 glides ( less than 60 Inches ) or a kit of 2 ( 60 inches or longer ).
Check Stock

H2o 5 Inch Deck Plate (Black)

  • Made of Heavy Duty UV-Resistant ABS Plastic.
  • THIS DECK PLATE is leak-proof. SCREW-IN style has a single-start, non-jamming (no cross-threading).
  • A RUBBER O-RING on this screw-in deck plates creates a watertight seal for safety. It includes a safety lanyard to secure the lid cover. Screws not included..
  • THE OUTSIDE Diameter is 6-3/4 inches (171.45mm), THE INSIDE Diameter is 5 inches (127mm) and THE CUTOUT is 5-1/2 inches (139mm).
  • Easy installation with pre-drilled holes. Use silicone sealant on the hull or deck surface when installing the deck plate.
Check Stock

OXO Good Grips Strawberry Huller

  • Simply twist the stainless steel claw and pull to remove the entire strawberry hull and leaves, leaving the sweet fruit behind.
  • Hull and leaves are easily released with the push of a button.
  • Comes apart for easy cleaning and is dishwasher safe.
  • The OXO Better Guarantee: If you experience an issue with your OXO product, get in touch with us for a repair or replacement. We're grateful for the....
Check Stock

Aquaterior 5

  • Designed with a non-skid surface allowing horizontal as well as vertical mounting..
  • Material: UV-Resistant ASA Anti-aging Plastic, Anti-ultraviolet..
  • Corrosion free synthetic fittings and durable rubber seals..
  • Dimensions (Inside): 4" (101 mm) - (Outside): 5 5/8" (143 mm).
  • Easy installation with pre-drilled holes. Use silicone sealant on the hull or deck surface when installing the deck plate.
Check Stock

Revell H.M.S. Bounty

  • Includes: detailed hull with wood grain, deck with pin rails, rudder and row boat, 4 cannons on mounts and sails with canvas texture.
  • Includes: 5 figures and display stand with name plate.
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....
Check Stock

Bilge Pump Hose, 1-1/8 Inch Dia Bilge Pump Installation Kit, 6 FT Premium Quality Kink-free Flexible PVC Hose, 2 Stainless Steel Clamps and Thru-Hull Fitting.

  • The bilge pump hose is made of high-quality PVC material, which is light and durable. And it is resistant to oils, solvents and chemicals..
  • Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow..
  • Kit includes 6 FT of 1.125" Inner Diameter hose, 2 stainless steel worm gear hose clamps, and 1 thru hull connector..
  • Thru-hull fitting accommodates up to 1-1/4 inch hull thickness.
Check Stock

Five Oceans FO296 Marine Round Inspection Screw-in Deck Plate, 4 inches, Anti-Aging, Anti-Corrosive and UV-Resistant ABS Plastic, White

  • This FIVE OCEANS Marine Round Inspection 4 inches screw-in deck plate is made of anti-aging, anti-corrosive and UV-resistant ABS plastic with smooth finish..
  • Deck Plate is leak-proof. SCREW-IN style has a single-start, non-jamming (no cross-threading). Separate cover plate and chassis for easy installation. Screws not included..
  • It is designed with a rubber O-ring that creates a watertight seal for safety and allows to be used for interior and exterior applications. It includes a safety lanyard to secure the lid cover..
  • OUTSIDE Diameter is 5-5/8 inches (143mm), INSIDE Diameter is 4 inches (102mm) and CUTOUT is 4-7/16 inches (113mm)..
  • Use silicone sealant on the hull or deck surface when installing the deck plate.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock