Categories

Best Humidity Controller Switch

iPower Quiet 6 Inch Inline Duct Ventilation Fan with Temperature Humidity App Control via Bluetooth and WiFi, Exhaust Blower for Hydroponics, 6'' EC, Heating Cooling Booster and Grow Tent

  • Intelligent programming controller: Feature with temperature and humidity setting, timer, alarm system and fan speed control. ON/OFF/TIMER/ATUO modes can switch according to needs. The controller can link one additional fan to share the same programming.
  • Efficient EC motor: Upgraded fan has low noise, low power consumption and long life by mixed flow design combined with a Pulse Width Modulated (PWM) controlled EC motor. Reinforced plastic housing and ABS blades ensure durable quality.
  • App remote control: Download "iPower Life" App, connect fan via Bluetooth and WIFI and unlock remote control-set temperature and humidity, adjust fan speed, set the timer and alarm, realize fan auto operation and support third-party voice service.
  • power: 70W. Kit includes fan, intelligent controller, corded sensor probe, AC power plug and required mounting hardware.
  • Applications: Perfect solution to circulate fresh air, boost heating/cooling to rooms, reduce humidity and lower temperature. Designed to quietly ventilate hydroponic grow rooms, grow tents, attic and basement, kitchen and more.
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humi....
Check Stock

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Inkbird Temperature Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed Homebrew Reptile Breed

  • ????????US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • ????????Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • ????????Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ????????More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • ????????Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fe....
Check Stock

Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor

  • 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier

  • Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL list....
Check Stock

WILLHI WH1436H 110V Digital Air Humidity Controller with LCD Display High Accuracy Humidity Sensor & 118'' Power Cable, Humidification Mode & Dehumidification Mode

  • 2 Modes to keep Designed Humidity: This digital humidity controller can help you turn on/off your equipment at desired humidity. You can choose between 2 modes: Humidification Mode & Dehumidification Mode..
  • Accurate Humidity Sensor: Each controller comes with a humidity sensor of high accuracy. The length of the cable is 3 meters so that the sensor can reach much farther places. You can easily plug in/out the sensor. It’s easy to replace and helps saving money..
  • LCD display & Sensitive Humidity Alarming : The humidity controller has high/low humidity alarm function. If the humidity is too high or too low, it alarms you immediately. Also, you can set the range of humidity as you need..
  • Power-Off Protection: The controller can automatically save the data or setting even it suddenly goes out of power..
  • Easy & Flexible to Use: It can be directly plugged in the outlet without any cables so that it can be used instantly. You can install it on the wall or put it on your desk, which is very flexible. It’s widely used with humidifiers, dehumidifiers, dryers, clothes dryers, chemical cooling cabinet, seed germination, etc..
Check Stock

WILLHI WH1436H 110V Digital Air Humidity Controller with LCD Display High Accuracy Humidity Sensor & 118 Power Cable Humidification Mode & Dehumidification Mode+1pc Extra Sensor

  • 2 Modes to keep Designed Humidity: This digital humidity controller can help you turn on/off your equipment at desired humidity. You can choose....
  • Accurate Humidity Sensor: Each controller comes with a humidity sensor of high accuracy. The length of the cable is 3 meters so that the sensor can....
  • LCD display & Sensitive Humidity Alarming : The humidity controller has high/low humidity alarm function. If the humidity is too high or too low, it....
  • 100% Satisfaction Guarantee: It can be directly plugged in the outlet without any cables so that it can be used instantly. It’s widely used with....
  • One extra sensor packed:More convenience if needed to replace it..
Check Stock

Xtrasun XTC1100 LT1 Lighting Controller

  • The Xtrasun Lt1 lighting controller (XTC1100) Provides dual zone lighting control for use with Xtrasun double-ended fixtures..
  • The Lt1 is capable of controlling up to 160 fixtures (80 for each zone). The Lt1 controller is specifically designed for use with Xtrasun Xtdekt1 and Xtdeokt1 lighting fixtures, which use 0-10V dimming and have the proper RJ14 ports for compatibility..
  • The Lt1 controller has an intuitive, easy to use color touch screen display. Each controller incudes two temperature and humidity sensors (one for each zone), mounting hardware, All necessary cables, one external cage clamp adapter, and one power supply..
  • In addition to controlling the on/off scheduling of the light systems, The Lt1 controller offers temperature based dimming, auto shutdown for extreme temperature situations, Sunrise/Sunset simulation, and connections for external equipment such as dehumidifiers and air conditioning systems..
  • Switch, dim and boost from one centralized location easy to use Advanced color display automatic dimming for excessive temperature (user adjustable set-point) automatic ....
Check Stock

iPower 4 Inch 195 CFM Inline Fan, Upgrade Air Carbon Filter, 8 Feet Ducting Speed Controller Rope Hanger and Temperature Humidity Monitor Kits, 4', Grow Tent Ventilation

  • Mini construction fan and rope hanger: Size: 4 inches.
  • speed: 2500 RPM. Noise level: 30db. Free pair of 8-ft adjustable ratchet clip hanger rope: hold up to 150 lbs..
  • size: 4 inches (diameter) x 8 feet (length) when fully extended. Temperature endurances range from 0 ~ 185°F. (-18℃ ~ 85℃). 1 pair of 4-inch metal clamps made from stainless steel..
  • dimension: 4inch flange ducting x 12inch length. 1200 + IAV Australian RC412 activated carbon with pre-filter. 50mm carbon layer of thickness for higher absorption and performance. Hook design, easy to hang..
  • Variable speed controller: One control switch for 3 settings, OFF, HIGH, MED, LOW. Humidity monitor: Fast response that measures every 10 seconds. Measuring range: temperature from 14℉ to 122℉（-10℃~50℃) and humidity from 10% to 99%..
  • Package includes: 1 x 4inch 195 CFM inline duct ventilation fan.
  • 1-pair 1/8 inches 8 feet long rope hanger.
  • 1 x 4inch 8 feet aluminum ducting with 2 clamps..
Check Stock

Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed

  • ❤❤【US ETL Certificate Listed 】ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. More power up to 1800W..
  • ❤❤【Main Functions]】Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ❤❤【Dual Temperature Sensor]】Temperature sensors are waterproof and the temperature control range is -40~212°F (-40~100°C)..
  • ❤❤【Multiple Functions Temperature and Humidity Control Mode with Dual Relay Output】ITC-608T can work as a temperature controller, a humidity controller, a temperature humidity controller and dual temperature controller..
  • ❤❤【Multipurpose Usage】 Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking. Max Loading: 120V 15A 1800W..
Check Stock

VIVOSUN Digital Indoor Thermometer Hydrometer Calibrated Humidity Sensor with Humidity Guage, Temperature Humidity Monitor Meter with Touch LCD Backlight for Home, Office, Indoor, Battery Include

  • Ultra-Reliable & Accurate: VIVOSUN digital thermostat controller records accurate all time/24 hours max and min temperature and humidity readings.
  •  Data measurements are updated every 10 seconds to give you latest changes of the environment.
  • Easy to Read & Operate: The humidity gauge is designed with a clean display and simple to use touch-screen, with a convenient touch panel to switch between Fahrenheit (°F) and Celsius (°C).
  • Pressing the “All-Time” or “24-Hours” buttons turn ON/OFF the automatic 24-hours function and automatically resets the Min./Max..
  • Backlight & LCD Touchscreen: Large LCD display features a green backlight and touch-screen, ensuring the display is easy to read even in dim conditions.
  • Backlight can be turned on/off, so it’s easy to use whether in the bright sun or pitch black.
  • Responsive Readings: This gauge will accurately display indoor humidity and temperature and help you prevent colds, dry skin, and other humidity related ailments.
  • Temperature measuring range: -10~70℃ / -32~158 ℉.
  • Multiple Applications: Digital wall Thermometer is designed for using with a ....
Check Stock

TOPGREENER Dual Tech Humidity Sensor Switch, Infrared PIR Motion & Air Moisture Detection, Bathroom Fan & Light Control, Adjustable Timing, Neutral Wire Required, UL Listed, TDHOS5, White

  • FAN TIMER SWITCH Dual-tech in-wall humidity control switch that controls both bathroom fan and light simultaneously. Dual technology of passive infrared (PIR) motion sensor switch and humidity sensor switch for fan. Automate light and exhaust fan control to keep you hands-free..
  • BATHROOM FAN OCCUPANCY DETECTOR Converts bathroom ventilation fan control wall switch with this smart humidity control switch, turning fan ON automatically when humidity exceeds preset level and turning OFF as it drops to normal to eliminate excess humidity.
  • HUMIDITY SENSOR SWITCH features simple controls and operates in two modes: Occupancy Mode (auto on/off lights, auto on/off fan), and Vacancy Mode (manual on/ auto off lights, auto on/off fan). Adjustable time delay and humidity level.
  • MOTION SENSOR Two single pole switches to control bathroom light and fan separately.
  • Energy savings of up to 40% with motion sensing control.
  • 4 time delay settings from 15 sec to 30 min.
  • 120VAC, 3A fan/motors, 500W incandescent/halogen, 150W CFL/LED.
  • Up to 600 sq.ft coverage, 180 degree field of view.
Check Stock