Categories

Best Hvac System Service Valves

Kazeffi Synchron Motor 24V 4RPM Replacement for Honeywell Motor 802360JA，Used in V8043/8044 Zone Valve Control

  • 【Higher Performance】:802360JA Zone Valve motor Adapt to Honeywell zone valve motor V8043/V8044 . This Zone Valve Motor 24V, 4rpm at 50/60HZ. Cable....
  • 【Save time and money】:This Replacement motor for v8043 zone valves motor Easy to install. No need to replace brand new actuators or other HVAC....
  • 【High Quality】:Quality tested for over 100K cycles for flawless operation,Metal gears can be perfectly compatible with Honeywell V8043 or V8044....
  • 【More Applicable Scenarios】:802360JA can be replaced: HVAC damper control motor, Actuator Zone Valve motor etc. After many professional debugging,....
  • 【After-sale service】:100% after-sale guarantee, if you have any dissatisfaction with the product, you can ask for a replacement or a full refund.....
Check Stock

6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter

  • ...ening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
  • Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
  • Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow.
  • The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance.
  • Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for durability and safety.
Check Stock

Aupoko R134A R12 Valve Core Quick Remover Installer, Air Conditioning Adjustable High Pressure (Red) and Low Pressure (Blue) Valve Core Tool, 2 Pack

  • ☀ GOOD REPLACeMENT --- R134a valve core remover installer designs for using of servicing valves to remove and install the valve core R134 or R12 from a 1/4-inch male flare access fitting in AC systems without the loss of refrigerant. Excellent for replacing valve cores without discharging or reclaiming the system..
  • ☀ HIGH & LOW PRESSURE QUICK COUPLER --- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
  • ☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason....
Check Stock

Robinair 49134A R134 Aluminum Manifold Hose Set and Service Couplers,MultiColor

  • ❥【R134A CHARGING HOSE】The R134a Charging Hose is 19" with 2.75“ Air Conditioning Gauge, R-134a Can to R-12/R-22 service port connection,1/4"....
  • ❥【BPV31 PIERCING VALVE】BPV31 Piercing Valve ( Not OEM）for HVAC System, 3-In-1 Line Tap Piercing Valve for Bullet, Fits 3 sizes of tubing:....
  • ❥【ADAPTER]】The 1/4 to 1/4 Adapter with valve core, fits for Mini Split System Air Conditioners, HVAC and Refrigeration..
  • ❥【PREMIUM QUALITY & EASY INSTALLATION】 The replacement part is made from durable high quality material and well-tested by the manufacturer. You....
  • ❥【SALES SERVICE】The R134a Charging Hose kit has 12 months warranty, true worry-free shopping experience. If this part ever fails please contact....
Check Stock

Orion Motor Tech Vacuum Pump with Manifold Gauge Set, HVAC Vacuum Pump for R134a R12 R22 R502

  • ...tup and easy operation as you nip your HVAC problems in the bud.
  • WIDE APPLICATION: This car AC gauge set works with R134a, R12, R22, and R502 refrigerants.
  • ideal for both DIY and professional HVAC maintenance, it allows you to measure your system's pressure, evacuate and refill coolant, and more.
  • QUICK SETUP, LASTING SERVICE: Get right to work evacuating and recharging your HVAC systems with this air conditioner vacuum pump, reassured by its strong 1 year warranty and OMT's usual friendly 24/7 customer service!.
Check Stock

WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600

  • ...e the refrigerant. Note: Before removing the valve core, close the valve of the valve core wrench and disconnect the air conditioner inner connection..
  • Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
  • Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and durable, suitable for most equipment..
  • Package Include: 1*Valve Core Remover Wrench, 1*R410 R32 Brass Adapter, 20*Valve Cores, 5*brass nuts, 1*Valve Core Rod.
Check Stock

iPower 6 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 6\

  • Lightweight valve wings: The valve wings open under the pressure created by the airflow and then automatically close with the spring work. The backflow flap closes automatically at low air volumes. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction.
  • Keep away from rattling: It has an internal foam strip and a smooth-running spring to keep the valve wings from rattling. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 6 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

R134A R410A R12 R22 Refrigeration Charging Hose Set with Ball Valve 3 Color Coded Hoses/w Ball Valve 1/4 SAE Thread Connector for Air Condition Refrigeration Charging Tools AC HVAC Maintenance Kit

  • WIDE APPLICATION --- Standard refrigeration charging hoses with 1/4" SAE male and female thread for refrigerants R134A, R22, R12, R502, R404..
  • HIGH WROKING PRESSURE --- 7" length ball valve hvac charging hose completed with solid brass manual shut-off ball valve. Rated working pressure: 3000....
  • PREFECT DESIGN --- HVAC hoses with ball valves designed to meet standard 1/4 inch SAE female refrigerant charging hoses set with shut off of red, blue....
  • EASY INSTALLATION --- R22 charging hose and ball valve set design with 45 degree angle on the service port site for easier access. Can be operated....
  • PREMIUM QUALITY --- Refrigerant hose made of high-quality brass alloy and rubber, last long. Strong sealing for durability and safety. Necessary tools....
Check Stock

OMT R410a Gauges, AC Manifold Gauge Set for R410a Refrigerant, 3 Way AC Gauges R410a Manifold Set with R410a R22 Safety Valves, 3 Hoses, R410a Adapters, Universal Can Tap, AC Recharge Kit

  • a heavy-duty blow molded carrying case comes included for easy storage and transport between jobs.
  • SATISFACTION GUARANTEED: Order this AC manifold gauge kit with your peace of mind assured thanks to OMT’s strong 1-year warranty and usual friendly 24/7 customer service.
  • order at no risk and start enjoying better air conditioning today!.
Check Stock

iPower 4 inch Backdraft Shutter Damper Back Draft Blocker, One-Way Airflow Ducting Insert Backflow Preventer with 2 Inline Springs Loaded Folding Blades, 4", HVAC Extractor Fan Vent, Range Hoods

  • ...ition of the spring should be horizontal for horizontal installations so that it can open and close optimally.
  • One-way airflow ducting insert: Back-flow valve with 2 spring-loaded wings prevents the reverse airflow movement through the ventilation duct when the ventilation system is turned off.
  • Material: The 4 inch Backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel and can withstand temperatures from 14 to 140 °F.
  • Wide applications: Back draught valves can be inserted into ventilation ducts which are flexible or non-flexible. Designed for use with range hoods, bathroom fans, kitchen and other home HVAC applications. Essential for HVAC ventilation.
Check Stock

4PCS 16CM U-type Magnetic Tip Screwdriver Anti-slip Repair Tool(1.7 2.0 2.3 2.6)

  • Versatile 11-in-1 Screwdriver / Nut Driver for the HVAC professional.
  • Includes unique style bit for installation/removal of common TR-4 Schrader valves and aggressive thread extractor tip for backing out broken cores.
  • Great for HVAC and other industrial applications.
  • Blast finish bit tips provide a firm hold and reduce cam out.
  • Contains: 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted, #1 and #2 Phillips, 1/4-Inch (6 mm), 5/16-Inch (8 mm) and 3/8-Inch (10 mm) nut driver, #1 and #2 square, core removal/installation, core extractor.
  • Cushion-Grip handle for greater torque and comfort.
Check Stock

RTMMFG Oxygen MAPP Torch Kit Portable Cylinder Metal Stand for Soldering Brazing Sparker Protection glass Extra nozzle Gas Cylinders Not Included

  • Advanced gas control system on handle makes it easy to precision flame , dual flashback arrestors..
  • For soldering, brazing and jewellery work. Applicating in HVAC and plumbing..
  • 360° rotation of torch tube is capable for various using environment. Temperature can reach 6432℉..
  • Super oxy blow torch with MAPP & OXYGEN. Lightweight & Portable. Suited for 14.1OZ MAPP and 1.4 oz Oxygen Fuel Cylinders..
  • Caution: Must close the valves on the cylinders when not in use! If you encounter the problem that the welding torch can not ignite, after the welding torch is installed, please adjust the flame valve and ignite when you hear the sound of outgassing. It will be your best partner at work. Please just feel free to contact us at any time..
Check Stock

Draft Blocker 6 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector 6 Inch

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring....
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC....
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal....
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from....
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are....
Check Stock