Categories

Best Hxchen Pin Metal

Brass Clutch Badge Insignia Clutches Pin Backs Replacement (Gold, 50 Pieces)

  • Material: the small clutch is made of quality nickel plated brass.
  • Unnoticeable while lock pins firmly and keep them secure.
  • Metal material makes it anti-wear, sturdy.
  • Package contents: each clutches pin size is approximately 10 mm in diameter, packaged in clear plastic case for neat storage.
  • Quantity are enough for replacement to your torn or lost one.
  • Exquisite design:clutch pin backs are great match for most metal pin.
  • clutch provides good grip of pin to keep it stay in place.
  • With its firm and protective grip, rest assured that you will never lose another pin again.
  • Easy to use: featuring a spring-loaded fastener, these pin backings are easy to put on and take off.
  • Simply push to secure onto pin post and pull the trigger while holding onto your pin to release.
  • These locking pin backs are a great alternative to rubber clutches.
  • Wide usage: the metal pin back can be applied with tie tacks and lapel pins that have lost their backings, or with your own homemade craft pins.
  • Can also be applied as the back of lapel pins, hat, tie tacks, name tag, toy pins, citation bars, service bar, etc..
Check Stock

Asexual Panromantic Pride Flag Cute Funny Ace Aesthetic Tank Top

  • HIGH QUALITY metal and hard Enamel colors pin 0.8" (20mm) height.
  • Made of hard enamel and durable silver colored metal.
  • Each pin comes with a matching card, wrapped in transparent poly bag.
  • Each pin has a durable and sturdy metal clutch back.
  • Multicolored flag Asexual LGBTQ heart pin.
Check Stock

60 Pieces Metal Drapery Curtain Rings Curtain Hanging Rings and 60 Pieces Metal Curtain Drapery Pin Hooks for Window Door Shower Curtain, 30 mm Internal Diameter (Black)

  • Amount of package: you will receive 60 pieces metal curtain hanging rings and 60 pieces metal curtain drapery pin hooks, nice combination and enough quantity for meeting your various requirements.
  • Size information: the metal drapery curtain ring size is approx. 30 mm in diameter, the metal curtain drapery pin hook size is approx. 25 x 20 mm, proper size fits for most curtain, please make sure the size before purchase.
  • Durable material: the curtain hanging rings are made of quality solid steel, thick and strong, durable and not easy to be torn or fall off, hold the curtain firmly and securely.
  • The curtain hooks are made of zinc metal material, it has pin points in the hooks, be careful to scratch your fingers or getting caught on threads in your header tape.
  • Easy to install: just use the metal curtain hanging ring to through the curtain rod one by one, then attach the metal curtain drapery pin hook to the ring, it's finished and you can try to sliding the curtain easily, no other tools required.
  • Where to use: nice combination of the curtain hanging ring and metal curtain drapery pin hook can widely applied for most kinds of curtains, such as shower curtain, window curtain, french window curtain and so on, classic color can m....
Check Stock

Lapel Pin Backings,Butterfly Clutch Pin Backings PVC Rubber Pin Backs Pin Keepers for Replacement Uniform Badge (Black, Pack of 50)

  • Nice packing-Rubber backs are packed in a transparent plastic box,Each box contains 50pcs rubber pin backers. Pin Locks suits for lapel pins, badges, hat, tie tacks, name tag, toy pins, citation bars,etc..
  • Super practical-These PVC rubber pin backs are totally awesome! because they keep the pin from moving around.The soft rubber pin back effectively isolate sharp metal pins and ensure they remain in place，Great replacement for pin clutch backs..
  • If you wear lapel pins on the reg. Throw away the metal backs that don't grip and replace them all with these rubber backs that won't fall off, leaving your pin lost on the ground somewhere. They have great grip, and don't loosen with time..
  • the PVC pin back is tight and they are not easy to fall off.
  • Each pin back has a hole which is compatible with the tie tack pin，The rubber pin backs are only compatible with the pin 1-1.2 mm in thickness, it can't fasten if the pin is too slim..
  • Put the pin in the rubber pin backing, your items will keep pinned securely. With smooth opening and closing, yet the pin back clasp is well secured because of the pin backs locking feature.If there is any problem or these Pin backings does not fit your, just contact we will return full refund to you..
Check Stock

Five Nights at Freddy's Black T-Shirt-XL

  • FNAF Night Guard Security Metal Badge Cosplay Is The Perfect Piece To Add To Your Collection, Your Uniform, Hat, Perfect for FANF Fan And FNAF Gamer..
  • 5 Nights Freddy's Metal Security Badges Pin Fits All Your Needs To Make For The Perfect Gift, For All Occasions, For Childs, Teen, And Fnaf Fan, Or Even As Just A Little Something Special For Yourself, It'll Draw In Smiles And Joy On Uniform..
  • You Will Receive: 1 Metal Security Badge Pin With Metal Chain, Made from Metal and Attach To Uniform by Pin or use with chain as a necklace.
Check Stock

JOREST Watch Band Tool Kit, Repair Kit for Watch Strap Adjustment and Replacement and Resizing , with Watch Link Removal Tool, 10 Spring Bars, 10 Pins, User Manual

  • ...her products】 — Compared with other products, we added the leather strap punch, you can punch to adjust the length of your leather strap.
  • we lengthened the length of the pin punch, increased the grip handle of the double-headed hammer, more conducive to operation.
  • shortened the pin of the pin punch pin, and use metal to protect the pin is not easy to bend and can be replaced..
  • 【Two strap remover with use】–metal strap remover is more suitable for taking out the strap pin directly.
  • watch bracket and double-headed hammer is convenient to insert the strap pin, two tools with use more convenient..
  • 【Precautions】–When you use the metal strap remover and fail to eject the pin, please check whether the following situations occur: 1. The direction of the punching needle is inconsistent with the direction indicated by the arrow on the strap 2. The pin hole of the strap is not aligned The gap at the front end of the metal strap remover.
  • please adjust the strap, otherwise it is easy to cause the punching needle to bend and damage your watch..
  • 【Easy to use】 — Turdy and durable, easy to carry, practical, easy to operate, you can solve the problem of the watch at home, save the expensive expenses, suitable for beginner families, can be used as a g....
Check Stock

Aromantic ARO Ace Asexual Arrow Pride Flag Themed Garden Flag Welcome Party Outdoor Home Yard Banner 3x5 Ft Decorative Flag

  • HIGH QUALITY metal and hard Enamel colors pin 0.8" (20mm) height.
  • Made of hard enamel and durable silver colored metal.
  • Each pin comes with a matching card, wrapped in transparent poly bag.
  • Multicolored aromantic flag LGBTQ heart pin.
Check Stock

Est Mundun Office Inspired Pins for Jackets, Backpacks and Hats - Dwight - Michael - Pam - Toby - Pam

  • QUALITY BAKCING PIN : This Pin features all metal backing to insure you never lose your pin! By having two backing pins the pin will not rotate and will always stay in position on your jacket or shirt! Perfect for everyday wear!.
  • MATERIAL: Our Pins are made from soft enamel meaning the pins color will not fade or become less vibrant. Our pins also feature RAISED metal meaning the ” black ” is slightly raised over the enamel adding a nice shine and luster to the pin!.
  • MEASURES: Pin measures 1.5″ and .70″ – Pin would look great on the pocket of a jacket or dress shirt. Perfect for anyone with a individual sense of style!.
  • PERFECT GIFT: This pin is GUARANTEED to bring a smile to anyone in your life! Pin is crafted in the best material available to insure it lasts a lifetime!.
  • Our offices favorite character! Toby from The Office TV show brought to life in an enamel pin! Also available we have Kim Kardashian, Drake, Lebron Kermit and Others..
Check Stock

Bisexual Pride Pin Bi Flag Enamel Lapel Heart Gay Pin Brooch

  • Made of hard enamel and durable silver colored metal.
  • Each pin comes with a matching card, wrapped in transparent poly bag.
  • Pink Purple and Blue bi community flag pin.
Check Stock

Star Wars Millennium Falcon Collector Metal Pin, 3 x 2 Inches | Official Lucasfilm Collectible, Rey Skywalker And Han Solo Vehicle | Enamel Pins For Backpacks, Jackets | Novelty Gifts And Accessories

  • Make The Kessel Run: We've got a good feeling about this. Express your fandom with this exclusive Star Wars pin. Specially crafted with fans in mind, the movie-authentic design features the Millennium Falcon..
  • Exclusive Design: Inspired by Han Solo's iconic YT-1300 Corellian freighter, this unique metal pin depicts the legendary Millennium Falcon. Buckle up and go to lightspeed with this collectible accessory..
  • Premium Construction: Pin is made out of die cast metal, featuring a hardened exterior to ensure a durable, long-lasting product. The silver-toned design and fine detailing provides extra authenticity..
  • Solo-Approved Cargo: Perfect for display or trade, this collectible metal pin measures approximately 3 x 2 inches. Comes with two rubber backings, allowing it to be securely pinned onto a variety of items..
  • Makes A Great Gift: Punch it! Jump to hyperspace with this officially licensed Millennium Falcon metal pin. Smuggle this Star Wars pin into your collection or gift it to someone who loves a galaxy far, far away..
Check Stock

Starrett Drive Pin Punch Set, S565WB, 8 Pieces - 1/16\

  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer.
  • SET OF 8: The Starrett S565WB bulk set includes eight drive pin punches with a 4" overall length and 1/16.
Check Stock

Starrett Drive Pin Punch Set, S248 - Set of 5 -1/8\

  • PIN PUNCH USES: Pin punches are tools used to insert or knock out rivets and pins in assemblies.
  • They have a metal shank on one end and a metal pin driver on the other and are typically tapped with a hammer.
  • SET OF 5: The Starrett S248 bulk set includes five drive pin punches with an extra long length of 8" and 1/8.
Check Stock

Winks For Days It s Fire Hard Enamel Lapel Pin

  • QUALITY MATTERS: It's Fire is a colorful, high-quality, hard enamel pin made with gold metal. Each pin has a smooth, polished, surface that’s....
  • SAFE AND SECURE: Each pin has 2 posts on the back and comes with two rubber pin backs to attach it securely to your clothing or bag. It's important to....
  • UNIQUE ARTISTIC STYLE: We design each pin ourselves. After all, you’re one-of-a-kind and you deserve originality and creativity. Even the backs of....
  • COLLECTIBLE: Our pins are tiny metal pieces of collectible art you can wear. Pop them on, pop them off. Winks For Days has so many fun designs to....
  • THE PERFECT GIFT: Enamel pins from Winks for Days make perfect presents for family and friends. Need a gift for your bestie? Pin! Gift for your....
Check Stock