Categories

Best Hydraulic Check Valve

Comp Cams 26906-16 Beehive LS6+ Valve Springs for GM LS Engines

  • PRODUCT FEATURES - The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance. In addition, contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.
  • MIANLY FUNCTIONS - If your car's hydraulic tappet with issues of abnormal noise, stuck, excessively excessive wear on the underside, the check valve is not tightly closed, then this hydraulic valve adjuster product will be your best choice to solve these problems..
  • PERFECT FIT - For 4.7 Dodge/Chrysler Lash Adjusters HLA.
  • Manufacturer Part Number: 53021077 replaces: 5073596AA.
  • Package Includes - 16 Pieces Engine Hydraulic Lifters.
Check Stock

VEVOR Double Acting Hydraulic Cylinder 2'' Bore, Top Link Hydraulic Cylinder 10'' Stroke, Retracted 18\ Extended 26 Hydraulic Side Link Swivel Eye Bearing w/Check Valve for Tractors, Category 1, 2

  • High Tensile Steel Structure: This hydraulic lifting cylinder is a welded double acting cylinder. It has a high tensile honed cold drawn hydraulic tube, a polished piston rod, and sturdy threaded glands. With bearing design on base ends. Carbon steel construction ensures its longevity and features a max 6700 lbs pushing force and 4500 lbs pulling force..
  • 2"-2.5" Bore 10" Stroke Top Link: The top link cylinder is built under specific dimensions. Bore: 2"-2.5". Stroke Length: 10". Rod Size: 1". Pin Size: 0.8". With retracted min length 20" and extended max length 28". Double Pilot Check Valve Port Size: G3/8. Max Pressure: 5076PSI. Max Flow Rate: 20 L/ min. Opening Pressure: 50.76 PSI..
  • Swivel Eye Bearing Design: There is a spherical swivel eye bearing design on both ends. Due to the sturdy and flexible bearings, you can quickly fix and install the cylinder on your tractors or min excavators. Joint Bearing Width: 2". Thickness 0.8". Durable enough to hold a lot of force..
  • With Check Valve & Fully Tested: The well-assembled and thoroughly tested tractor top link hydraulic cylinders also come with a double pilot operated check valve to help hold the cylinder and prevent drift. The assembled inside sealing rings guard the high performance of sealing, accessi....
Check Stock

RULLINE 16 Pcs Engine Valve Lifters Lash Adjuster 3021077 5073596AA Fit Compatible with Dodge 4.7 Overhead Cam Engine 5

  • PRODUCT FEATURES - The pushrod seat is made of a special powdered metal iron alloy that is heat-treated for strength and wear resistance. In addition, contain a longer piston than conventional hydraulic lifters, which provides more load bearing surface and increases lifter longevity.
  • MIANLY FUNCTIONS - If your car's hydraulic tappet with issues of abnormal noise, stuck, excessively excessive wear on the underside, the check valve is not tightly closed, then this hydraulic valve adjuster product will be your best choice to solve these problems..
  • PERFECT FIT - For 4.7 Dodge/Chrysler Lash Adjusters HLA.
  • Manufacturer Part Number: 53021077 replaces: 5073596AA.
  • Package Includes - 16 Pieces Engine Hydraulic Lifters.
Check Stock

Hydraulic Loader Directional Control Valve LV22RFSTKAB Joystick Regen - 10GPM 4000PSI

  • SPECIFICATIONS: Our 2 spool directional control valve for double-acting hydraulic rams has 21 GPM, 3 position spring center and 4 positions, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position spring center and 4 positions that allows an actuator to open and close. This 2 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

JoyTube 5 Packs Check Valve 1/8” 3MM One-Way PVDF Plastic Hose Barb for Fuel Gas Liquid Air

  • One way inline Check valve can connect with hose barb in both sides.
  • Barb hose check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa.
  • PVDF wear resistant check valve’s inside is designed with a pagoda-shaped card slot, non-slip and non-toxic, with good airtightness and good adsorption performance.
  • Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
  • Made of PVDF, sturdy, wear-resistant and durable for long service.
Check Stock

Tolsous 1 Spool Directional Control Valves 11 GPM 3600 PSI MAX High Pressure Integral Valve Double Acting for Small Tractors Tractors Loaders Log Splitters

  • SPECIFICATIONS: Our 3 spool directional control valve for double-acting hydraulic rams has 21 GPM, 4-way 3 pos spring center, SAE 10 inlet and work ports and SAE 12 outlet ports. This hydraulic flow control valve has 4-way valving, adjustable 1500 with 3625 PSI..
  • VERSATILE: This G series P80 DCV has a 3 position, 4-way valving that allows an actuator to open and close. This 3 spool control valve can be used in any hydraulic circuit..
  • PRECISE FLOW: Simple and compact, the hydraulic joystick valve has one spool with a 21 GPM flow rate that precisely controls the direction of the flow of hydraulic fluids. This plow valve has a wide range of applications, including in log splitters..
  • MANUAL CONTROL: This high-pressure control valve comes with a joystick lever actuator for controlling the spool. You can control the log splitter valve manually, without an external, additional control system..
  • TANDEM CENTER: This adjustable relief valve is equipped with a spring tandem center. Since the fluid directly flows back to the hydraulic tank the hydraulic orbit motor prevents overheating and reduces noise during operation..
Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

  • SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
  • VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
  • ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
  • ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
  • HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..
Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock

Lesu 1/14 Metal Hydraulic Rc Backhoe Loader Aoue Bl71 2 in 1 Electric Excavator

  • Front and rear aluminum alloy wheels, high-quality rubber tire covers, full drive 4 * 4 power differential locking axle, and the reduction ratio of front and rear axles is 1:2.7..
  • The front shovel is equipped with a stainless steel bucket, and the bucket has a hydraulic opening and closing function..
  • Front fork, hydraulic front shovel, hydraulic bucket, one machine with multiple functions.
  • The rear digging arm is equipped with a digging assembly to move laterally, and the digging range is larger..
  • Hydraulic support leg, more stable operation.The rotary cab seat is convenient for the driver to operate at both ends and has a higher degree of simulation..
  • The hydraulic system is equipped with a hydraulic reversing valve, switching valve, brushless ESC, oil pump, fine stainless steel oil cylinder, overflow valve and other hydraulic components to form a precise hydraulic system, which is more coordinated and linear..
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Air Over Hydraulic Pump (Single Acting) Green - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock