Categories

Best Hydraulic Crimping Tool

AMZCNC 10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Burndy Y1MRTC Hytool Ratchet Crimper, Copper Hydent Terminals, Splices, and Thin-Wall C-Taps, 0.73' Width, 9-7/8' Length

  • 【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • 【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..
Check Stock

AMZCNC Hydraulic Cable Lug Crimper 10 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 9 Die (Crimping Tool)

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Hand Operated Hydraulic Crimping Tool Range 12 AWG-2/0 AWG for Cable Lugs Hydraulic Crimping Crimper Wire Terminal Lug Tool with 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

Hydraulic Copper Pipe Tube Fittings Crimping Tool with 1/2,3/4 and 1-inch Dies for ProPress Copper Pipe Fitting,Can t crimp Tee Fitting

  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is....
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Professional tool to attach lugs to the ends of heavy duty power cables and wires. The C-style head makes side entry easy to access and operate. Crimps 12 AWG to 2/0 AWG size copper and aluminum wires..
  • Crimping range is from 4 to 70 mm2. Maximum crimping power 10 tons. Vinyl-dipped grip for comfort and easy control. A carrying case is included to sort of all necessary parts.
  • Easy operation and easy to change the dies. On-Off control for speedy operations.
  • 9 pairs of hexagon dies: a Hydraulic Crimping Tool Instruction..
  • 100% money back guarantee. All items have been double inspected before on market..
Check Stock

marddpair Hydraulic Hose Crimper Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool with 7 Die Set Fit for Barbed and Beaded Hose Fittings

  • Dies size: The hose crimping tool has complete dies covering hose sizes 6, 8, 10, 12(5/16, 13/32, 1/2â€, 5/8) and reduced barrier 8, 10, 12(13/32,....
  • Material: This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability..
  • Stamper hardness: Stamper hardness can reach up to 53 HRC, making the crimping effect better..
  • Advantage: This tool is easy to operate and save your time and energy. It is light-weight and compact, suitable for narrow space. Always wear safety....
  • Application: The hydraulic crimper is ideal for shop and field operations, barbed and beaded hose fittings..
Check Stock

DOUBLE CHEN Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2',3/4' and 1' Jaw Copper Pipe Propress Crimper Pressing Pliers,Along with Pipe Cutter

  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

RIDGID RP 340-B Press Tool - 43348 Hydraulic Crimping Tool Jaws Not Included - ProPress Tool Jaws, PureFlow MegaPress, Standard Series Jaws and Rings Compatible (Cordless)

  • Improved RIDGID Pressing Tool design is 30% smaller to increase maneuverability and a a 17% lighter tool reducing operator fatigue*.
  • LED-light built into the pressing tool for continued pipe joining operations of this hydraulic crimping tool in no or low-light environments.
  • At 42,000 cycles it's the Longest service Interval in the industry and 31% longer than previous models.
  • Cordless hydraulic crimping tool uses powerful an 18V Advanced Lithium 4aHr battery to produce 400 presses per charge for more uptime.
  • Compatible with all RIDGID Standard Series Jaws with up to a 4 inch capacity for copper / stainless steel or 2 inch PEX including RIDGID ProPress, MegaPress, Pureflow, XL-C, and Press Snap.
Check Stock

10 Ton Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8 to 3/16 Cable -Wire Swaging Tool Kit with Stainless Steel Cable Cutter

  • 【DURABILITY】Made of durable materials, high strength and good toughness. And dies are made of hardened steel with chrome finish. It also provides....
  • 【SPECIFICATION】Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic....
  • 【HUMANIZED DESIGN】With this professional crimper, you can crimp wires and butt connectors easily. It is much easier than using a pair of hand....
  • 【Size】Hydraulic Hand Crimper Tool: Length:approx.310mm, Weight:approx.N.W1.75kg G.W3kg. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • 【Package List】Includes Hydraulic Hand Crimper with 9 sets of the crimping dies, seal rings, strong protective carrying case, cable cutter and pair....
Check Stock

UTZIKO Hydraulic Cable Lug Crimper 10 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 9 Die (12awg~00awg Crimping Tool)

  • Professional tool to attach lugs to the ends of heavy duty power cables and wires. The C-style head makes side entry easy to access and operate. Crimps 12 AWG to 2/0 AWG size copper and aluminum wires..
  • Crimping range is from 12AWG to 2/0AWG. Maximum crimping power 10 tons. Vinyl-dipped grip for comfort and easy control. A carrying case is included to sort of all necessary parts..
  • Easy operation and easy to change the dies. On-Off control for speedy operations.Innovative tongs with guide rails effectively control the die so that it does not sway from side to side.Innovative return spring makes one-handed operation very smooth..
  • 9 pairs of hexagon dies；Complete set of seals；a Hydraulic Crimping Tool Instruction..
  • 100% money back guarantee. All items have been double inspected before on market..
Check Stock

10 Ton Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool 9 Dies Crimping wires Crimper

  • Design: C-type head, easy to change mold and fixed line position Hydraulic.
  • Efficiency: Hydraulic crimping machine is much easier than hand crimping, higher efficiency, less strength.
  • Hydraulic Design: Provide 10 tons of maximum pressure relay hydraulic mechanism, can easily rotate crimp wire.
  • Safety: Quick release of on/off knob, when the pressure reaches the maximum pressure of the valve, automatic release to prevent overpressure.
  • Compatibility: 10 Ton hydraulic wire crimper features 9 sets of dies for providing large crimping range from 4 to 70 square millimeters, ideal for meeting your different crimping needs.
Check Stock

BLIKA 10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Dies, Wire Swaging Tool for 1/8' to 3/16' Cable Railing Hardware

  • Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic crimper’s head can be rotated 180° freely to benefit narrow space working, a good choice for battery and welding cables, power wires, electrical cables, etc..
  • Material: Made of durable materials with high strength and good toughness. Black Oxide Crimp Head and Dies won’t chip or flake. Dies are made of hardened steel with chrome finish. Vinyl-dipped grip for comfort and easy control..
  • Black Crimping Dies: Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG cables and creates strong, hexagonal crimps for a clean, efficient look for your projects..
  • Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. The C-style head makes side entry easier to change the dies..
  • Package List: 1X Hydraulic Crimper Tool + 9 pairs of crimping dies + 1X Cable Cutter + Seal Rings + 1X Work Gloves + 1X Carrying Case. If you’re not satisfied with this item at any time within one month of purchase, we’ll provide a refund or replacement..
Check Stock