Categories

Best Hydraulic Fluid Kit

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock

Mophorn GO-KART Brake Master Cylinder Kit for 150cc Go Kart Hydraulic Brake Kit Universal Go Karts Brake Kit Kandi Complete Including Master Cylinder, Hose, Caliper, Pad for 150cc

  • High Adaptability: This go-kart hydraulic brake kit is compatible with Hammerhead and Trailmaster karts and other 150cc go-karts. It provides superior performance demanded by off-road enthusiasts..
  • Promised Braking & Cooling: This hydraulic brake kit features heavy-duty stopping power for everyday drivability. Drilled & slotted rotors improve heat dissipation during extreme conditions..
  • Quality Material: The master cylinder of this go-kart brake kit is made of high-performance aluminum, preloaded with DOT3 brake fluid. The brake discs are constructed from high-quality steel, durable and lasting for daily use..
  • Complete Accessories: The go-kart hydraulic brake assembly includes a master cylinder, three brake calipers, three brake hoses, and brand-new brake discs. It comes ready to install, pressurized with brake fluid. Do not worry about bleeding the brakes..
  • Key Parameters: Bolt Spacing of Master Cylinder Brake Pedal: 0.787" / 20 mm.
  • Master Cylinder Mounting Hole: 2.36" / 60 mm center to center. Three rubber brake hoses: 34" / 860 mm, 43" / 1090 mm, 75" / 1900 mm..
Check Stock

AmazonCommercial Air Operated Pneumatic Oil Transfer Pump Heavy Duty Double Action 3:1 3.2GPM / 12LPM for SAE130 Oils/Fluids (NOT for Gasoline or Diesel)

  • Heavy-duty pneumatic (air-operated) 3:1 double-action oil transfer pump for medium- to high-viscosity fluids and short- to medium-distance applications.
  • Provides a high flow rate of up to 3.2GPM (12LPM).
  • suitable for SAE130 oils/fluids, including motor oil, synthetic hydraulic oil, gear oil, hydraulic fluid, and automatic transmission fluid (NOT for use with gasoline or diesel).
  • Air inlet connection of 1/4-inch and oil outlet connection of 3/4-inch male.
  • maximum air inlet pressure of 5-8BAR / 70-115PSI.
  • maximum fluid pressure of 24BAR / 350PSI.
  • Long pumping life of 221k+ gallons (840k L).
  • minimal moving parts in the air motor assembly translate to less downtime and lower repair costs.
  • corrosion-resistant design uses stainless steel, aluminum, and chrome on key components for longer life.
  • 2-inch adjustable bung adapter for easy installation.
  • can be barrel, cart, or wall mounted (wall mount kit or extension tub kit sold separately).
  • backed by an AmazonCommercial 1-year limited warranty.
Check Stock

64 Pc 37 Degree JIC Flare Thread Cap and Plug Assortment Kit Hydraulic Hose Tube and Pipe Fitting Kit Galvanized Steel

  • [Wide Application]: JIC cap and plug kit widely used in agriculture, construction, mining, and fuel industries, works great for hydraulic repairs, can withstand high pressure applications and fuel delivery and fluid power applications..
  • [Excellent Performance]: Protects the ends of hydraulic hose and fittings to prevent leakage of hydraulic fluid to the ground or into machinery. Also prevents contaminants such as dirt, dust, and moisture from entering and damaging machine components. Works great for temporarily capping or plugging hydraulic lines while working on equipment..
  • [Exquisite craftsmanship]: The cap and plug are produced by precision machines, using high-quality heavy-duty steel that can withstand high temperature and high-pressure environments, and are galvanized to resist multiple corrosions. Precision threads that can be disconnected and reconnected repeatedly without deformation..
  • [Packages Include]: Package includes 6 common uses sizes of JIC caps and plugs, #4 (7/16-20) JIC caps and plugs---each 10PCS, #6 (9/16-18)caps and plugs---each 8PCS, #8 (3/4-16)caps and plugs---each 6PCS, #10 (7/8-14)caps and plugs---each 4PCS, #12 (1 1/16-12) caps and plugs---each 2PCS, #16 (1 5/16-12) caps and plugs---each 2PCS, a total of 64 pieces in the set.....
Check Stock

TRUEGARD Hydraulic Oil AW 32 55-Gallon Drum

  • 6,000 HOUR SEVERE SERVICE - Extremely long life fluid with very long oxidation life. Three times the life of most other fluids..
  • ANTI-WEAR BOOSTER PACK - Contains a built-in severe service, anti-wear booster pack. Three times the zinc of most other hydraulic oils..
  • HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, it prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
  • DIRECT OEM FLUID REPLACEMENT for CAT HYDO 10 and CAT HYDO 10 Advanced OEM fluids..
  • ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release. SAVES 40%- 80% on fluid costs annually versus regular or economy hydraulic oils..
Check Stock

Dometic Baystar Hydraulic Steering Kit, HK4200A-3

  • Gives 5 wheel turns lock-to-lock when using BayStar outboard cylinders.
  • Kit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438).
  • Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses).
  • Dn not use BayStar on smaller HP outboard engines that use wing nut type transom mount clamping screws.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

LUCAS 10018 Hydraulic Oil Booster with Stop Leak, 1 Gallon, Brown

  • 6,000 HOUR SEVERE SERVICE - Extremely long life fluid with very long oxidation life. Three times the life of most other fluids..
  • ANTI-WEAR BOOSTER PACK - Contains a built-in severe service, anti-wear booster pack. Three times the zinc of most other hydraulic oils..
  • HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, it prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
  • DIRECT OEM FLUID REPLACEMENT for CAT HYDO 10 and CAT HYDO 10 Advanced OEM fluids..
  • ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release. SAVES 40%- 80% on fluid costs annually versus regular or economy hydraulic oils..
Check Stock

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

Amalie 160-62836-56 Ford Type F ATF Trans

  • Motorcraft MERCON V is a premium-quality automatic transmission fluid.
  • recommended by Ford Motor Company for use in Ford, Lincoln and Mercury vehicles that require either MERCON V or MERCON type fluid.
  • Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended.
  • Do not use in transfer cases where MERCON ATF was previously recommended.
  • Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil.
Check Stock

CNC Aluminum 7/8' (22mm) Universal Motorcycle Dual Hydraulic Brake Clutch Master Cylinder Reservoir Lever Fit 50cc-300cc Sport Bike Street Bike Scooter (1 Pair, Red)

  • ★Universal Applications - Fit on most brand 50cc. to 300 cc. Sport bike/Street bike/Scooter with 7/8" (22mm) Standard Handle bars..
  • ★High Quality - Levers are made of CNN 6061 Aluminum Alloy and anodized in the same color as the cap of the brake fluid reservoir, two-finger short levers with 6-position adjusters..
  • ★Fitment - Suits for Honda, for Kawasaki, for Yamaha, for Suzuki, For Ducati etc..
  • ★Features - 12.7mm piston bore size universal standard 7/8" (22mm) dual hydraulic front brake master cylinder & clutch perch with adjustable levers and fluid reservoir full kit..
  • ★You'll Get - 1 Pair Of Hydraulic Brake Master Cylinder & Clutch Lever.
Check Stock

Gunk Liquid Wrench M3332 Hydraulic Jack Oil - 32 oz.

  • 6,000 HOUR SEVERE SERVICE - Extremely long life fluid, with very long oxidation life. 3 times the life of most other fluids..
  • ANTI-WEAR BOOSTER PACK - Contains a built-in severe service anti-wear booster pack. Three times the zinc of most other hydraulic oils..
  • HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
  • ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release..
  • SAVES 50%- 80% on fluid costs annually vs regular or economy hydraulic oils..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock