Categories

Best Hydraulic Gear Puller

Orion Motor Tech 3\ 4\ 6\ 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels (GD)

  • Universal Removal Tool: This 3-jaw removal tool set works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more, removing even rusted parts easily and—thanks to its even distribution of force—without damage..
  • Better Together: This professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2.3" reach and 3" max. spread.
  • a 4 inch gear puller with a 3" reach and 4" max. spread.
  • and a 6 inch gear puller with a 4.7" reach and 6" max. spread..
  • Versatile Reversible Design: Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed..
  • 45# Carbon Steel: All parts are made with premium heat-treated 45# carbon steel for maximum strength. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life..
  • Satisfaction Guaranteed: Along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by Orion Motor Tech's warranty and friendly customer service..
Check Stock

Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free....
Check Stock

SKF TMMA 75H EasyPull Hydraulic Puller, 3 Jaws, 84 Ton Capacity

  • Ready-to-use, integrated hydraulic cylinder, pump and puller.
  • Safety valve prevents spindles and pullers from being overloaded if excessive force is applied.
  • Spring-loaded center point on the hydraulic spindle allows easy centering of the puller on the shaft.
  • Supplied with extension pieces and one nosepiece.
  • Quick and virtually effortless bearing dismounting.
Check Stock

VEVOR Hydraulic Cylinder Liner Puller 15 Ton Liner Puller Tool, Both Dry-Type and Wet-Type Fit Diameter of 80mm-140 mm, Universal Cylinder Liner Puller Tool Set for auto Repair and Disassembly

  • 15t Hydraulic Puller: Max Capacity: 15T. This hydraulic cylinder puller is suitable for all cylinders with a diameter of 80-140 mm. Both dry type and wet type can be used. It's ideal for the disassembly of internal combustion engine and cylinder liner..
  • Superior Quality: The hydraulic puller is made of premium steel and processed by precision forging. It is sturdy, corrosion-proof, and has stable performance. The support seats, lead screw, and screw nut are all thickened, which will be more durable..
  • Complete Puller Kit: A complete set of tools required for removing the internal combustion engine and cylinder liner. Every part is included, and they are easy to assemble. Our cylinder-pulling artifact can easily remove the cylinders without damage the original parts..
  • Easy Operation: This 15t cylinder liner puller is very simple to use. All you need to do is adjust the inner diameter of the cylinder liner that you need to pull out, and you can use it directly—no need to take down the crankshaft..
  • Wide Application: Suitable for the removal of internal combustion engines and cylinder liners. Also, suitable for pulling hubs, flanges, gears, bearings, and more. It is a great helper for the auto repair shop, garage, automobile maintenance..
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6"8" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and 6-inch and 8-inch gear pullers both have 6 positions..
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach,and a 8-inch gear puller with a 10.75-inch jaw spread and 8.75-inch jaw reach.
Check Stock

NMAZA 3 Jaw 10 Inch Hydraulic Gear Puller 10Ton Wheel Bearing Pulling Separator 3 in 1 Pump Oil Tube Drawing Machine M/Case

  • 【POWERFUL TOOL】 : This Hydraulic Gear Puller has 10 Ton Max Capacity and 2"(50mm) Ares Travel with spread10" ( 250mm) which can meet your working requirements.
  • 【3 IN 1 DESIGN】:This Wheel Bearing Pulling Separator integrates pumps, oil tube and drawing machine. Its forged steel 2 way yoke allows twin or triple leg pulls, the 3 jaw types can be adjusted from high to low point. Pump head can be turned by 360°for flexibility.
  • 【COMPACT & LIGHTWEIGHT】: The integral puller is compact and lightweight, Packed in blow mould carrying case, easy for you to transport or storage.
  • 【EASY TO USE】-Easy to carry and operate, portable structure is easy for carrying and operation.
  • 【WIDE APPLICATION】: This great Wheel Bearing Hub Removal Tool has wide appication, which is suitable for pulling hubs flanges, gears and bearings.
Check Stock

ABN 8in 3-Jaw Gear Puller – Removal Tool for Slide Gears, Pulley, and Flywheel

  • [Durable 3 Jaw Puller Tool]: Use the ABN 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller to remove most shift-fitted parts with ease.
  • 3 prong gear puller evenly distributes pulling force to protect your gears.
  • [Damage-Free Removal]: Manual bearing puller removes slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
  • [Multi-Position Design]: Universal pulley puller tool has reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
  • Reach measures in 4 lengths from 6.25-inches to 8-inches (15.9 to 20.3cm).
  • [Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
  • Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
  • [Works with your Existing Tools]: 9.5-inch (241.3mm) tall hex head screw fits any 19mm hand wrench, ratchet, or combination spanner for gear and bearing removal.
Check Stock

DURATECH 4-Piece 3-Jaw Gear Puller, 3', 4', 6', 8', Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CRV

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6, and 8-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaf....
Check Stock

ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley, and Flywheel

  • [Perform Maintenance with Ease]: Remove gears, pulleys, and flywheel parts with the ABN Jaw Gear Puller Set Pulley Removal Tool.
  • Wheel bearing puller 1-pack makes removal simple and damage-free for your vehicles.
  • [Built to Last]: No need to worry about this hub puller tool falling apart when you need it most.
  • Constructed of forged and hardened steel for strength and longevity, steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • [Optimal Reach]: Struggling to access tight, cramped spaces is a thing of the past.
  • Use the small jaw puller bearing automotive gear puller Removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
  • [Adjustable Performance]: Whether you are looking to remove parts from your engine base or your wheels, jaw puller too features universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • [Perfect Size]: 2-jaw transmission gear puller measures 6.25 inches (22.2cm) with jaw spread.
  • Universal pulley puller has 4.75-inch (12.1cm) jaw reach for your vehicle maintenance projects.
  • Use any 17mm hand wrench, ratchet, or combination spanner with this jaw gear puller set 1-pack.
Check Stock

ARES 15036 - Reversible 2/3 Jaw 2-Ton Ratcheting Gear Puller - Chrome Moly Steel Construction - 2-Inch to 3-Inch Adjustable Range - Removes Gears, Pulleys, and Flywheels

  • ITEM SPECIFICATIONS: Our 2/3 Jaw 2-Ton Ratcheting Gear Puller features three jaws and has an adjustable range of 2 to 3 inches. The smooth ratcheting action makes making adjustments a breeze, as the locking ratchet design holds the clamp open for easy installation..
  • DESIGN CONSIDERATIONS: The 2-Ton Ratcheting Gear Puller features high strength Chrome Moly Steel construction and a Manganese Phosphate coating to help prevent rust and corrosion. Our design enables the 3-jaw gear puller to quickly convert to a reversible gear puller or a 2-jaw gear puller in no time, and the finely threaded center screw allows for enhanced pulling power..
  • COMMON APPLICATIONS: The super strong low profile foot design allows for access to tight or confined spaces that traditional pullers just can't reach, as this versatile gear puller allows you to smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ratcheting Gear Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be part ....
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

Amerbm Gear Hub Pulley Puller Bearing Separator 2 and 3 Legged 3" 4" 6" 8" Gear Puller Set Suitable for Remove of Gears, Hubs, Ball Races, Bearings, Flywheels, Pulleys and Sprockets

  • MATERIAL: Made of heavy duty steel, high hardness and strong, bear high-intensity pressure not easy to deformation and fracture, the exterior is coated with antioxidant layer to prevent rust, extended service life..
  • FUNCTION: This gear puller set can be reversed to pull parts from either the inside or outside. Hex head forcing screws suitable for use with your wrench, ratchet or spanner swivel thrust plates on the larger sizes prevents damage to shaft ends..
  • APPLICATION: The bearing puller suitable for the removal of gears, hubs, ball races, bearings, pulleys and sprockets. Even can be used for flywheels on small engines like found in outboards, lawn mowers etc..
  • DESIGN: This removal tool kit includes four puller sizes to cover most applications: 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
  • 4 inch gear puller with a 5" max. reach and 4" max. spread.
  • 6 inch gear puller with a 7.3" max. reach and 6" max. spread.
  • and 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
Check Stock