Best Hydraulic Hose 3psi
Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits
- 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
- 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
- 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
- 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
- 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check StockToledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire
- Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
- The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
- Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
- Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
- Handles 4" inner diameter for industrial hose..
Check StockDometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.
- SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
- Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
- Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
- Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check StockHydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings
- Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
- The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
- This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
- The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
- The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check StockTIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit
- Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
- Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
- Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
- Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
- Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check StockLINXINO Automotive Exhaust Back Pressure Tester/Gauge Kit with Adapter (M12&M18)
- 【Professional Diagnostic Tool】Specially used to help you quickly and accurately understand the condition of the vehicle's exhaust system, so that you can take the next step..
- 【Accurate Reading】Size of the dial: 2.5".
- 3 colors indicate good or bad status, high visibility and easy to read..
- 【Easy to Use】6-foot hose allows the user to test from the driver's seat. The pressure should be lower than 1.25psi at idling speed, and lower than 3psi at 2500rpms..
- 【High Quality】The gauge head is equipped with a rubber sheath to prevent damage, convenient to carry..
- 【Quality Assurance & Excellent Service】Our products have been professionally tested, please buy it with confidence! If you have any questions during the purchase and use, please feel free to contact us, we will reply you within 24 hours..
Check StockHydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set for Barbed and Beaded Hose Fittings
- Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
- The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
- This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
- The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
- The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check StockOTC 1513B 4 Ton Collision Repair Set
- Very competitively priced, yet high quality set that includes a single-speed hydraulic hand pump, hose, and ram.
- Components snap together for quick setups to apply pushing, spreading, or pulling force.
- Components include: hydraulic pump, hose, and ram.
Check Stock
VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System
- Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
- Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
- Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
- Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
- Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock
Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System
- 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
- Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
- Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
- Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
- Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check StockEsco 10202 Pro Series Combination Bead Breaker Kit with 5 Quart Hydraulic Pump
- Includes model #10101 Combi Hydraulic Bead Breaker.
- 5 quart hydraulic pump with durable metal reservoir and aluminum air motor.
- 8 ft. hydraulic hose with swivel fitting and coupler.
- Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
- Works on all single, two and three piece wheels.
Check Stock10000 psi Hydraulic Hand Pump 2 Speed Power Pack Hydraulic Lifting Pump
- Maximum operating pressure of 10,000 pounds per square inch (psi)，Two-speed Plunger Improves Pump Efficiency By 70%.
- Advances and releases design for applications with a constantly applied load Pressure relief valve (Oil return knob)helps prevent pump overload, switch( venting nut) on the tail of it avoid sealed of oil box.
- Oil capacity: 700cc, 2M high pressure hose ，oil pipe coupling with PT3/8 thread.
- Manual Hydraulic Pump is durable, smooth surface and good sealing performance. Integral Casting Pump Body, Durable, Stable And Reliable.
- High-pressure hydraulic hand pump for 5 ton to 200 ton hydraulic ram cylinders or split unit hydraulic puller and other hydraulic applications.
Check StockEsco 10820 Pro Series Combi Bead Breaker Kit with Pump
- Includes model #10895 Combi Bead Breaker.
- 5 quart hydraulic pump (10,000 psi) with durable aluminum air motor.
- 8 ft. hydraulic hose with swivel fitting and coupler.
- Kit includes air pressure regulator that regulates the inbound air pressure to 110 psi which prevents damage to the seals and hydraulic system.
- Works on all single, two and three piece wheels.
Check Stock
