Categories

Best Hydraulic Jack Cylinder

Mophorn 12V/DC Hydraulic Pump 15 Quart/ 3.9 Gallon Double Acting Metal Reservoir Hydraulic Pump Unit Remotely Controlled for Dump Trailer

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Bonvoisin 20T Hydraulic Cylinder Jack Porta Power Ram 2' Stroke Mini Single Acting Lifting Cylinders with Hydraulic Hand Pump for Machinery Shipbuilding

  • [Small & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2).
  • the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Bonvoisin 10T Hydraulic Cylinder Jack Porta Power Mini Hydraulic Ram Multi-Acting Low Profile Lifting Cylinders for Machinery Shipbuilding (Cannot Retract Automatically)

  • [Ultra-thin & Portable] - This hydraulic cylinder is portable, small in size, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces..
  • [Note] - After the pressure is relieved, the piston of the jack ram CANNOT retract by itself! You must use gravity to press the jack to retract, which is not a quality problem..
  • [Used with Pumps] - The porta power should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2)..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the cylinder jack, you can replace it for free..
Check Stock

Anbull 10 Ton Porta Power Hydraulic Jack, Upgraded Hydraulic Combined Multifunctional Jack for car Repairs,Auto Body Frame Repair Kit

  • 【Stability and Convenience】 The pump body of this hydraulic jack uses upgraded SEA#1045 steel. The oil passage will not have iron slag, and the new design of the oil passage is more stable. The pressure bar of the hydraulic portable ram kit adopts an integrated type pressure bar, which is beautiful and easy to use.The steel core of the cylinder is chrome-plated, which is more precise and wear-resistant and has a long service life..
  • 【Long Service Life】The hydraulic cylinder steel core of this 10 ton porta power kit is chrome-plated, precise, wear-resistant and has a long service life..
  • 【Stainless Steel Material】The pump of this porta power kit is made of stainless steel, with an industrial luster,which is stronger and harder to break,Compared with other hydraulic jack tool kit,our hydraulic power units give you even more long-term durability..
  • 【Multi-function Auto Body Frame Repair Kit 】Used for car, truck, farm and heavy equipment maintenance. Very suitable for various auto-body repairs, frame repairs and construction jobs..
  • 【Package Include】1x hydraulic hand pump, 1x round seat, 1x rubber ball, 1x V-shaped head, 1x wedge head, 1x connector, 1x flat base, 1x pressure nozzle, 1x ring claw, 1x extension foot, 1x hydraulic cylinder, 4x c....
Check Stock

NEWTRY Hydraulic Ram Cylinder 20 ton Hydraulic Jack Lifting Cylinder Hydraulic Porta Power Cylinder Ram 0.51” Low Profile Hydraulic Ram Jack Mini, Portable for Shipbuilding, Bridge, Construction

  • ... 20T | Stroke: 0.51 inch/13mm | Self height: 2.3 inches/58mm | Outer diameter: 4x3 inches/100x80mm | Internal diameter: 2.6 inches/65mm | Weight: 6 lbs/2.75kg | Effective area: 5.13 square inches/33.16cm2 | Usded with Pump: CP-180(not included)..
  • ▷[SMALLER SIZE & GREATER WORKING CAPACITY]---The height of this hydraulic jack is only 2.3inches, which can lift 20T heavy objects. It has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are suitable for CP-180 pump and 30T is suitable for CP-700 pump..
  • ▷[WIDE RANGE OF APPLICATIONS]---This Low Profile Hydraulic....
Check Stock

TEXALAN 20T 2Inch Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 50mm Hydraulic Lifting Cylinders

  • [SIZE]: Diameter of spindle:2 inches（50mm)；Holding capacity：20T..
  • [MATERIAL]: With heavy metal structure, our hydraulic cylinder jacks are durable and can be used for a long time. Painted surface to prevent scratches and corrosion..
  • [LARGE CAPACITY]: Our ram hydraulic cylinders are designed to provide reliable support during operation. There is no card mark when lifting, large size 20 T/44000 LBS tonnage, enough stroke (50 mm/2 inches)..
  • [EASY TO USE]: The quick-connect head is equipped with a dust cover to prevent dust from entering the socket, and the connection is firm and leak-free. The structure is compact and the operation is simple. The hydraulic convex cylinder adopts smooth surface and round texture to provide reliable support during work..
  • [WIDE USE]: This hydraulic jack cylinder has the advantages of small size, suitable for narrow spaces. It is a good helper for electrical, chemical, steel, bridge, machinery and other industries as well as fitters, welders, car body, frame workshop..
Check Stock

VEVOR Bottle Jack 32 T Car Jack Hydraulic Floor Jack 70500LBS with Manual Hand Pump Pneumatic Air Jack Heavy Duty Auto Truck Travel Trailer Repair Lift

  • Heavy Lifting Capacity: Maximum load can reach up to 32 tons. The lifting height adjusts from 10.4" to 16.7". Featured with multi-layer seals and fully polished and chromed cylinder rams, the air hydraulic bottle jack ensures a good sealing performance and reliable operation..
  • Pneumatic/Manual Operation: Dual operation method is available, manual operation and pneumatic operation. The 32-ton air bottle jack can connect to an air compressor for easy and labor-saving lifting operations. Plus, the high lift bottle jack also comes with a detachable handle for manual lifting in the absence of an air compressor..
  • Flexible & Reliable Lifting: The height of the air hydraulic jack can be adjusted flexibly from 10.4" to 16.7". High strength piston rod allows for powerful lifting capacity. The non-slip head holds the load securely. With two throttle return springs, the 32-ton air hydraulic bottle jack can be automatically reset after use..
  • Heavy-duty Steel Structure: Made of sturdy metal, this hydraulic bottle jack provides a reliable and strong lifting capacity. In addition, the lacquered surface is rust-proof, not easy to wear. The thick and wide base provides stable support, easily cope with heavy loads..
  • Diverse Application: This hydraulic bottle jack with ....
Check Stock

K Tool International Hydraulic Jack 22 Ton Blue Air Truck Jack HD KTI63194

  • [22-TON CAPACITY] - K tool International service jack rated to lift up to 22 tons or 44,000 lbs..
  • [TRUCK JACK SPECS] - Minimum Height: 9" (228mm).
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [BUILT-IN MUFFLER] - Provides built-in muffler to promote quiet operation, High speed turbo motor for efficient effortless operation..
  • [STRONG/DURABLE] - Heavy duty truck jack (service jack) has a welded cylinder and reservoir for added strength and durability. The truck jack also has chrome plated rams to resist rust and wear..
Check Stock

AMZCNC 20T Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 2\(50mm) Hydraulic Lifting Cylinders (20T 2Inch Hollow)

  • 20 US Ton Capacity. 2" Stroke Hollow Hydraulic Cylinder Ram.
  • Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap.
  • Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return..
  • Hard black oxide plated high carbon steel ram. Proprietary heat-treated steel shell..
  • This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..
Check Stock

OTC UA22 22-Ton Under Axle Jack with Air Assist

  • OTC's UA22 22-Ton Under Axle Jack features air-assist operation and a self-retracting, spring return with a long, 47-1/4 in. T-handle that lets you easily position the jack under vehicles with long overhangs.
  • One pull of the handle activates the self-retracting, 4-1/2 in. stroke, 22-ton capacity ram, without having to crawl underneath the vehicle, while large rubber-tired steel wheels ensure maneuverability and movement on most types of terrain.
  • 3 inch diameter, round saddle, with center notch and 3 saddle attachments - 3/4 in. for 17-3/4 in. lift, 1-15/16 in. for 18-15/16 in. lift, and 3-7/8 in. for 20-2/3 in. lift, allowing height adjustments based on vehicle being lifted.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram offers additional rust resistance.
  • Wiper seals protect hydraulic system from contaminants.
  • Specifications: 22-ton capacity, 4-1/2 in. cylinder stroke, 4-1/4 in. extended screw length, 90-145 PSI, 8.27 in. to 20-2/3 in lifting range using longest saddle, 69.87 in. reach, 8.27 in. frame height, 11.73 in. x 22.63 in. footprint, 100 lb. weight.
Check Stock

Bonvoisin 20T 4 Inch Hollow Hydraulic Cylinder Jack Porta Power Ram Single Acting Lifting Cylinders 4\ Stroke for Machinery Shipbuilding

  • [Hollow Design] - The hollow design of the cylinder jack allows it to be used for pushing or pulling, which can meet your different needs..
  • [Split Design] - The porta power ram is portable, small in size and easy to store. But it must be used with a hydraulic/electric pump. For example, they can all be used with CP-700(ASIN: B08QV222RP)..
  • [Automatically Retract] - This hollow ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate..
  • [Connector & Dust Cover] - The connectors adopt threaded ZG3/8" joint, which is screw-locked and has a compact structure. And the dust cover can prevent dust from entering to protect the connector..
  • [Wide Applications] - This hydraulic jack can be widely used in power, chemical, steel, bridges, shipbuilding, machinery and other industries! However, it does NOT apply to cars..
Check Stock

VEVOR Hydraulic Long Ram Jack, 8 Tons/17636 lbs Capacity, with Dual Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red

  • Handles up to 8-Ton/17636 lbs: This 8-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26″ -45.7″ Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 8 tons/17636 lbs. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the pressure dual pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel an....
Check Stock

VEVOR Hydraulic Long Ram Jack, 12 Tons/26455 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red

  • Handles up to 12-Ton/26455 lbs: This 12-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 12 tons/26455 lbs. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade s....
Check Stock