Best Hydraulic Manifold Block
SMALL BLOCK CHEVY/PONTIAC 283 305 327 350 400 SBC V8 T3 TWIN TURBO MANIFOLD
- Full stainless turbo manifold, with 42mm tubing , 2,9 mm wall thickness.
- The manifold will hold up to 800+ horsepower,Comes with a T3 turbo flange.
- Compatible for 86-92 Chevrolet camaro v8 small block engine (5.0L) 283, 305 ,327, 350 and 400 (5.0L).
- Compatible for 82-92 Pontiac firebird 8 cyclinder small block engine (5.0L).
- Compatible for 82-92 Pontiac trans-am small block engine.
Check Stock5.3L AFM DOD Replacement Kit Lifters Camshaft Head Gaskets for 2005-2014 Buick Chevy Avalanche Silverado Suburban Tahoe Trailblazer Envoy Sierra Yukon V8
- 5.3 overhaul kit include: multiple layers steel (MLS) head gasket, valve cover gasket, valve stem seals, intake manifold gasket, exhaust manifold gasket, front camshaft seal, o-rings, other small gaskets, 30 cylinder head bolts (20 long bolts: 100mm, 10 small bolts: 45mm), 8 AFM (active fuel management) hydraulic roller lifters, 8 NON-AFM hydraulic roller lifters, 4 AFM lifter tray w/ bolts, replacement dod camshaft (single bolt).
- AFM kit fit for 2005-2007 Buick Rainier 5.3l V8, for 2005-2006 Isuzu Ascender 5.3l V8, for 2005-2009 Saab 9-7x 5.3l V8.
- 5.3 head gasket kit for 2007-2013 Chevrolet Avalanche 5.3l V8, for 2007-2009 Chevrolet Avalanche 5.3l V8, for 2007 Chevrolet Silverado 1500 Classic 5.3l V8, for 2005-2013 Chevrolet Silverado 1500 5.3l V8, for 2007-2014 Chevrolet Suburban 1500 5.3l V8, for 2007-2014 Chevrolet Tahoe 5.3l V8, for 2005-2008 Chevrolet Trailblazer 5.3l V8.
- AFM lifter and camshaft for 2005-2006 GMC Envoy Xl 5.3l V8, for 2005 GMC Envoy Xuv 5.3l V8, for 2005-2009 GMC Envoy 5.3l V8, for 2007 GMC Sierra 1500 Classic 5.3l V8, for 2005-2013 GMC Sierra 1500 5.3l V8, for 2010-2013 GMC Sierra 5.3l V8, for 2007-2....
Check StockDokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350
- 【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
- 【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
- 【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
- 【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
- 【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..
Check StockMotion Raceworks Vacuum Boost Reference Billet Aluminum Distribution Block
- This billet aluminum vacuum/boost reference billet distribution block is made to simplify and clean up plumbing lines for boost and vacuum purposes on your boosted LS engine..
- The design allows the block to be mounted universally or off the upper two most holes on LS1 cylinder heads front or rear as well as on a firewall, or anywhere else. This manifold is CNC machined from 6061 aluminum and features 8 separate 1/8 NPT ports and 2 1/4" NPT ports (on each end) giving you many different options for line routing and enough spaces for all of your boost reference signals.
- This works great for plumbing to your boost reference fuel pressure regulator, manifold pressure wastegates, blow off valve, map sensor, boost controller sensor and many other items. Comes with two stainless button head bolts with the correct length and thread to mount block to cylinder heads..
- Comes complete with 4 1/8" port plugs and 1 1/4" port plug standard..
Check StockE-Tuner 4
- EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
- Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
- Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
- Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check StockBATONECO Polished Airgap Intake Manifold High Rise Dual Plane Compatible with SBC Chevy 350 400
- 100% NEW - Made of high-quality aluminum material, Natural Intake Finish, Package Contents: Intake Manifold..
- COMPATIBILITY - Intake Manifold Compatible with Chevy Small Block SBC 350 400..
- ADVANTAGE - Basic Operating RPM Range: Idle-5500.
- FEATURE - intake manifolds are the perfect performance upgrades for your engine. These cast-aluminum manifolds are pressure-tested for leaks..
- DESIGN - The intake manifolds feature a high-flow runner design to deliver improved power from idle to 5500 rpm..
Check StockSpeedmaster 1-147-001 LowRise Intake Manifold 1957-1995 Small Block Chevy 350 He
- Satin Finish The Speedmaster LowRise Manifolds are our lowest profile manifold and is also the only one that is street legal on pollution controlled vehicles. It is set up to accept a spread bore carb but comes with an adapter plate that permits the use of square bore carbs. To remain street legal with a square bore carb, you must use one that is also approved as street legal for your application. This Speedmaster LowRise manifold is a direct replacement for the stock manifold on 1957-95....
Check StockSewtanc Vacuum Block Intake,Aluminum 6 Port Vacuum Block Intake Manifold Kit,Wastegate Turbo Boost,Fuel Wastegate Turbo Boost 3/8in Inlet Outlet 1/8NPT,for Racing
- 【Premium Material】New Universal Boost/Vacuum Manifold. T6061 aluminum billet is processed by high-quality CNC machine tools. The surface is anodized for a durable finish with a high finish. The perfect retrofit accessory, the billet vacuum manifold is a great add-on tuner that requires an extra vacuum source. Wastegate for boost vacuum block.
- 【6 Port Block Intake】6 1/8" vacuum ports, also with plugs if the tuner doesn't need as many ports. This will relieve all the hassle of splitting the lines and making extra ports if needed, great for hooking up Pressurized controls, gauges and any components that require a separate vacuum source. You can also use tape for fuel and oil requirements..
- 【Excellent Aftermarket Replacement】Includes 6X 1/8NPT Aluminum Fitting Ports for Boost Controllers, Map Sensors, Fuel Pressure Regulators, Boosters, Exhaust Valves and any other fuel/ignition that requires a vacuum source management components.
- 【Additional Vacuum Source Required】A billet vacuum manifold is a great add-on tuner, and the design of supercharged cars and single throttle bodies requires multiple vacuum sources. Turbo vacuum ports for automotive vacuum block intake manifolds.
- [After-sales guarantee] After you receive the product, if the product ....
Check StockSmall Block Chevy Overhaul Gasket Set, 350 Chevy, 67-'85
- Application Range: It fits 1957-1979 small block 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
- Application Range: It fits 1957-1979 small block Chevy 283, 307, 327, 350 and 383 V8 engines with a 2 piece rear main seal and left hand oil pan dipsticks. It includes all the necessary gaskets and seals for one complete engine repair..
- Premium Quality: Gaskets provide a reliable means of repairng your engine for your daily street cruiser, tow vehicle, street rod, circle track, dirt track, and drag strip performance racing engines.
- Gasket set includes the following pieces: Cylinder head gaskets, intake manifold gaskets, valve cover gaskets, exhaust manifold gaskets, timing cover gasket, timing cover seal, oil pan gaskets, water pump gaskets, fuel pump gasket, thermostat water outlet housing gaskets, distributor gasket, o ring valve stem seals, and rear main seal..
Check StockDokili Aluminum Satin Intake Manifold for Small Block SBC 305 327 350 400 1957-1986
- 【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
- 【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
- 【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
- 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
- 【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..
Check StockKegco Premium Commercial Grade Dual Gauge Two Product CO2 Draft Beer Regulator
- ...uction provides stable output pressure regardless of how much CO2 gas remains inside the CO2 cylinder, eliminating unpredictable catastrophes such as an end-of-tank-dump (EoTD). The output pressure is adjustable from 0-65 PSI based on customers’ different needs..
- Modular manifold block design. Two manifold blocks are included. Each block comes with its own high-precision needle valve and can be operated independently. You may use one block for one aquarium or use both for two aquariums..
- Safety and precision in mind. Our regulator has a built-in safety valve. It will open automatically to release the pressure when it exceeds 100 PSI. The integrated needle valve is precise. The CO2 output can be adjusted to as low as 1 bubble every 3 seconds..
- Solenoid runs on 12V DC instead of conventional 120V AC. This regulator adapts to 12V DC, which is more stable and consumes less power. The solenoid is safe to touch and is very quiet. This solenoid is designed to work with an automatic timer..
- Attention. Suitable for North American CO2 cylinder with CGA320 adapter! Installation tools are in....
Check StockHydrodrive MF75W Outboard Hydraulic Steering System till 75 HP
- Hydrodrive Outboard Hydraulic steering System up to 75 HP.
- Output Force: 220 kg, Torque: 46 Kgf, Max speed: 30 kts, Turns: 4,4.
- Hydraulic pump made from full block aluminium.
- Hydraulic Cylinder made from cold, drawn hardened aluminium.
- Choose the best Hydraulic Steering System for your boat.
Check StockPHITUODA 1\\/2 3 Ways 6 Ports Air Hose Inline Manifold Block Splitter, Pneumatic Air Compressor Manifold Fitting with Pipe Sealant Tape - Pack of 2
- *Package Included: 2 x Air Hose Manifold Block, 2 x Pipe Sealant Tape. Position: 3 Ways. The number of Threaded Ports: 6 Ports. Threaded Port Dia: 1/2" BSPT..
- *Premium Material: The manifold body is made of high corrosion-resistant anodized aluminum with a sky blue brushed nickel finish, which makes it not easy to deform, more durable, and 50% lighter than standard fittings..
- *Practical Design: The operating pressure is 0 to 1MPa / 145 PSI. Guaranteed pressure resistance is 1.2MPa / 175 PSI. The max working pressure is 2MPa / 300 PSI. The working Temperature is 32 - 140 ℉ / 0 - 60 ℃..
- *Ideal Application: Manifold Block takes one line of air from a pump, air cylinder, compressor, vacuum engine, or other such system and splits it into many of them. All ports are in the same size so that you can use it as a 1 in 5 out, 2 in 4 out, 3 in 3 out, and so on to meet your own requirement..
- *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the customer service you receive after the sale!.
Check Stock