Categories

Best Hydraulic Plywood Plate

CMT 252.072.12 ITK XTreme Industrial Fine Cut-Off Saw Blade, 12-Inch x 80 Teeth ATB Grind with 1-Inch Bore

  • For fast extra-clean crosscuts and occasional rip as well on wood and plywood..
  • To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
  • 0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 251.040.07 ITK Industrial Finish Saw Blade, 7-1/4-Inch x 40 Teeth 1FTG+4ATB Grind with 5/8-Inch003c003e Bore

  • For smooth finish crosscuts on wood and plywood. Good rip cutting..
  • To be used on portable and cordless circular saws for cutting soft/hardwood and plywood..
  • 0.071 kerf thickness, 0.047 plate thickness, 20° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

CMT 251.040.08 ITK Industrial Finish Saw Blade, 8-8-1/4-Inch x 40 Teeth 1FTG+4ATB Grind with 5/8-Inch003c003e Bore

  • For smooth finish crosscuts on wood and plywood. Good rip cutting..
  • To be used on portable and cordless circular saws for cutting soft/hardwood and plywood..
  • 0.075 kerf thickness, 0.047 plate thickness, 20° Hook Angle, 1 Flat + 4/20° alternate teeth Grind..
  • Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
  • Laser-cut plate features expansion slots to reduce noise and anti-vibration design..
Check Stock

Mophorn 24 inch Hydraulic Backhoe Excavator Thumb Attachments Weld On 1/2in Teeth Thick Steel Plate Assembly 12MM Bolt-On Design with Hydraulic Cylinder

  • With Hydraulic Cylinder: The hydraulic cylinder can work with a hydraulic pump to achieve length adjustment. The three mounting holes with different positions also enable you to adjust the angle according to your needs..
  • Item Specifications: The tooth plate of this backhoe thumb is 24 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use. All necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock

Mophorn 18' Hydraulic Backhoe Thumb, 1/2' Thickness Heavy Duty Excavator Thumb, Black Steel Weld On Thumb Attachments with Hydraulic Cylinder, Mechanical Hydraulic Thumb for Backhoe/Excavator

  • With Hydraulic Cylinder: The hydraulic cylinder can work with a hydraulic pump to achieve length adjustment. The three mounting holes with different positions also enable you to adjust the angle according to your needs..
  • Item Specifications: The tooth plate of this backhoe thumb is 18 inches long, 6 inches wide, and 1/2 inch thick. The weld plate is 19 inches long.
  • please measure your bucket before ordering to ensure a proper match..
  • Heavy-duty Steel Structure: Our backhoe thumb is made of heavy-duty thick steel and designed with a triangle structure. Thus, it has acquired excellent durability and stability. The surface is also powder-coated to resist corrosion..
  • Bolt-on Design: The simple-and-convenient bolt-on design allows for easy removal when not in use. All necessary fittings are provided to make sure you can assemble and weld the high-quality backhoe thumb without trouble..
  • Wide Application: Many people around the world have widely used our backhoe thumb. It is considered a perfect attachment tool for tractors, excavators, and other equipment to help you pick up objects more easily..
Check Stock

CNCEST Press Heat Machine, 5T Hydraulic Jack Heat Press Machine 2.4X4.7 Inch Dual Heated Platens 900W Heat Press Plates w/Precise Pressure Gauge & LCD Controller for Efficient Press

  • 【Wide Application】Hydraulic tech heat press machine is widely used for extraction of PU leather,plastic particles,dry flowers and plants.Maximize your starting material’s potential and desired outcomes. For each starting material, easily experiment and record your notes for future reference..
  • 【High Quality Heat Plate】The heat press comes with 4cm thick solid aluminum heating element, uniform heating, and smooth surface, heating plate size 6*12cm (2.4"*4.7")..
  • 【Manual Hydraulic Jack】The heat press machine is equipped with 5 tons manual hydraulic jack, high pressure pumping oil.
  • Continuously update the process, pass thousands of durability tests, continue to simplify operations,the convenient switch of heat press make it easier for you to use.
  • 【Accurate LCD Controller】The controller box is movable, the heating speed is faster, and the touch LCD screen can accurately display the time and temperature, with good performance..
  • 【Service Guarantee】Fast shipping from Amazon.
  • Satisfied problem solutions response within 24 hours.
  • Assured promise for return,replacement,refund based on quality & shipping problems(please keep efficient contact through amazon with us if needed)..
Check Stock

Titan Attachments Hydraulic Backhoe Thumb 24' 70 lb. Weld On Steel Plasma Cut

  • Includes thumb, hydraulic cylinder, hydraulic hoses, mounting plate, pins, and bushings..
  • Hydraulicpowered retraction gives full control over load size and adds crushing strength to grip..
  • Heavy duty steel plasma cut for tight tolerances..
  • 1/2" Flat face couplers and hoses included..
  • Thick powder coat to resist rust. | Easy to assemble and weld into place..
Check Stock

VEVOR 15 Ton Hydraulic Knockout Punch Kit, 1/2" to 4" Conduit Hole Cutter Set, KO Tool Kits W/Puncher 10 Piece, Metal Sheet Driver Tools, for Aluminum, Brass, Stainless Steel, Fiberglass and Plastic

  • Complete Punch Tool: Unleash your inner DIY master with this comprehensive hydraulic punch kit! With a hydraulic punch, 10 punches and dies, a step drill bit, a sturdy carrying case, 2 draw studs, a piston shaft, a spacer, and sealing rings, you'll have everything you need to attack a range of projects. The conduit fitting sizes range from 1/2" to 4". Max punching thickness for soft carbon steel plate: 0.1" (10 gauge).
  • Max punching thickness for stainless steel plate: 0.08" (14 gauge)..
  • Efficient Hydraulic 15T: Get the job done faster and more efficiently with our powerhouse hydraulic mechanism pump! The hydraulic mechanism pump produces 15T strong pressure, providing high punching accuracy and fast punching speed. Compared with standard wrenches, our knockout punch set is more labor-saving and efficient, ideal for completing big projects. The ram's angle can flexibly change to meet your various punching needs. It is also perfect for use in narrow places..
  • Built to Last: Made from a sturdy combination of 40 Cr steel and 45# steel, you can trust in its strength, sturdiness, and longevity. The stable construction is suitable for heavy-dut....
Check Stock

Dirt Bikes and Street Vendors

  • 5-Speed Manual Transmission: Heavy-duty clutch offers smooth, progressive engagement and smooth-shifting. Take fully controlyour bike, Pros best choice!.
  • Kick Start/ Electric Start, Electric start for easy starting well the kick startbeing useda backplanany unexpected situations..
  • Front and Rear Hydraulic Disc brakes allows the bikecomea faster stop than other brake systemsmakingmore safeuse.any rider would tell you, powernothing without good brakes. The high performance Hydraulic disc brake makes this bikeexperts choice..
  • Some assembly required: Assembly for dirt bikes include Handle bar brackets, wheels, brakes, number plate and fender. (May differ per model).
Check Stock

ERGAOBOY CNC 3018 Pro M Wood Carving Milling Engraving Machine,GRBL control 3 Axis DIY plastic Acrylic PCB PVC Wood,Effective Engraving Area 11.8x7.1x1.8\ Inch(300x180x45 mm)

  • Spindle motor knob is useful for small positioning adjustment ,with steady and strong support structure.
  • Can engraving much more materails by spiral flute bits,such as metal,steel,MDF board,solid wood,composite board plywood,stone.
  • MDF board,native wood,PVC,Acrylic, wood,composite board plywood,It can be used widely.
  • Signs,PCB,nameplates,badges,seals,bronzing plate,aluminium alloy,acryplates,ABS resin double color plate,PVC foaming board,indentation plates,signs,construction models,instrument panels,wooden products,etc.
  • If you encounter any problems, please contact us in time, we will deal with it within 24 hours.
Check Stock

Barber Chair, Styling Salon Chair, Heavy Duty Hydraulic Pump Classic Style Hair Stylist Makeup Chair with 360 Swivel Salon Spa Shampoo Tattoo Beauty All Purpose Equipment (Black)

  • ????【360 Degree Swivel】Our hydraulic barber chairs all have 360 degree swivel function that you can easily operate it in to the suitable degree you want. This hydraulic barber chair would be a perfect choice for any style of beauty salon, barber, and tattoo shop.
  • ????【High quality PVC Leather】This hydraulic barber chairs are made of Soft PVC leather with high-density foam padding provides a comforting place for your customer to relax. Easy to clean, don’t worry about hair falling to the dead angle. Completely waterproof, no need to worry about liquid spillage during haircut.
  • ????【Quality & Durability】This styling Salon Chair base made of chrome, which is extremely durable material. Elegant t-footrest with chrome base plate offers extra comfort for your client. Be able to the weight of 300lbs.
  • ????【Ergonomic Hydraulic Pump Salon Chair】 The Salon Chair features Heavy-duty hydraulic pump make height adjustment easier. Designed to fit the natural shape of the human back. High density foam provides comfort and support to the lower back. And the classic and stylish designs of our chairs are perfectly fit for any barbershop or salon decor.
  • ☎【Customer Service】If you have any problem with our products, don’t be hesitate to c....
Check Stock

CMT 230.520.06 Precision Dado Set, 6-Inch x 20 Teeth FTG+ATB Grind with 5/8-Inch Bore

  • Delivers splinter-resistant cuts in all wood, plywood and wood composites..
  • 0.125 kerf thickness, 0.098 plate thickness, -5° hook angle, Flat Tooth + Alternate Tooth Grind..
  • Anti-kickback design reduces the chance of overfeeding that can occur when cutting mass material..
  • 4-tooth chippers keeping the cut flat & free from tear out. 3/32” chipper for undersized plywood..
Check Stock