Categories

Best Hydraulic Rebar Cutter

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • ...r machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • ...r machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Anbull 900W Electric Rebar Cutter, Cutting up to 5/8 Inch 4-16mm #5 Rebar, with Replaceable Jaw Blades, Cutting Speed 2.5-3.0S (900W RC-16)

  • Cut Up to #6 3/4"(20mm) Grade 60 Rebar and Round Bar.
  • Includes: Cutter, Steel Carry Case, Wrench Set, Hydraulic Oil, User Manual.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • ...bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • ...bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Wheeler Rex 491-8 Manual Pipe Cutter

  • Super Hydraulic Pipe Cutter:6"-18" ASA Class 26 and 6"-20" Class 22 Water Main.
  • Wheeler-Rex Hydraulic Cutters are the solution to cutting larger diameter pipe.
  • Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe..
  • Their remotely operated hydraulic pumps provide the required power..
  • A minimum clearance is needed to wrap cutter chain around pipe, to engage it in the cutter jaws..
Check Stock

NEWTRY Hydraulic Cable Cutter Hydraulic Rebar Cutter φ25/32” Steel Wire Cutter 60KN Bolt Cutter for Copper Aluminum Cable, Armoured Cable, ACSR, Wire Rope, Steel Strand Wire, Aluminum Wire

  • ▷[HIGH CARBON ALLOY STEEL BLADE]---The Hydraulic Cable Cutter adopt high carbon alloy steel blade, high strength, and is specially used to cut copper aluminum wire and steel core aluminum stranded wire. Hook-type Knife Head is easy to open and close, and can be placed in any position. The blade can be replaced by opening the knife edge. The ASIN of the replacement blade: B07NMS6FQ5..
  • ▷[180°ROTATABLE HEAD & 360°FLEXIBLE USE]---The head of the industrial wire shear scissor can be rotated 180 degrees to facilitate adjustment of the working angle. It can also be operated in 360°, which is especially suitable for use in unfounded places and high-altitude projects..
  • ▷[ERGONOMICALLY DESIGNED INSULATED HANDLE+SAFETY VALVE SWITCH]---The handle of this hydraulic wire cutting tool uses a ring-shaped rubber handle to increase friction and provide a comfortable grip.Tighten (ON) when pressurizing and turn off (OFF) when releasing pressure, which is more safe and convenient..
  • ▷[SHEAR RAGNE & WIDE RANGE OF APPLICAITONS]---This Hand Crimper Tool can be used to cut copper aluminum cable,armoured cable, ACSR, wire rope, steel strand wire, copper wire,aluminum wire, steel rope,etc. But NOT SUITABLE FOR submarine cable, screw-thread rebar, iron chain or aircraf....
Check Stock

KwikSafety (Charlotte, NC) PINZA Ironworker Pliers Spring Loaded Action Side Cutters Steel Rebar Cut Diagonal Wire Cutters Bi-Material Tempered Handles & Aggressive Cross-Hatched Knurl Lineman Pliers

  • PEAK PERFORMANCE - The PINZA Lineman Pliers designed to cut & twist rebar tie wire. Heavy duty wire cutters made from alloy steel (no rust pliers)! Industrial handle tempering absorbs the "snap" when cutting. Features deep knurl channels to provide a strengthened grip power for twisting & pulling. Rebar wire pliers w/ induction hardened knives for easy cuts & longer life. Durable plastic-dipped handles w/ a polymer rubber coat for greater grip & (1) 135° bent handle for added pulling leverage..
  • RELIABLE SIDE CUTTER PLIERS - These linesman pliers feature a spring loaded handle for self-opening & an angled head design for better rebar tying performance. Lightweight rebar pliers (12 oz total weight) w/ an overall length of 9.19in (23.3 cm). Square nose side cutter linemans pliers w/ jaw thickness dimensions of 1.28in (3.3 cm) x 1.156in (2.9 cm) & a knife length of 0.625in (1.6 cm). High leverage design & hot riveted joint ensures a greater cutting tool & gripping power (NO handle wobble)!.
  • UTILITY STEEL PLIERS - The KwikSafety PINZA ironworkers pliers combine secure jaw grip w/ powerful cutting & features more plier cutter power over standard cutting pliers. The perfect cutters pliers for the home, workshop or jobsite! Long "handform" handles & heavy-dut....
Check Stock

DEWALT SDS MAX Bit for Rotary Hammer, 4 Cutter, 2-Inch x 22-1/2-Inch (DW5831)

  • Extreme durability: IRON BLAST TECHNOLOGY of the SDS max bits strengthens the bit.
  • 2X longer life: DEWALT SDS hammer drill bits have a full carbide head in 4 cutter design.
  • Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes.
  • Wear mark indicator: For accurate diameter of holes.
Check Stock

DEWALT Drill Bit, SDS MAX, 1-3/4-Inch x 22-1/2-Inch (DW5830)

  • Extreme durability: IRON BLAST TECHNOLOGY strengthens the drill bit.
  • 2 times longer life: DEWALT drill bits have full carbide head in 4 cutter design.
  • Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes.
  • Wear mark indicator: For accurate diameter of holes.
  • NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831).
Check Stock

DEWALT Drill Bit, High Impact, 4 Cutter, SDS MAX, 1-1/2-Inch x 31-Inch x 36-Inch (DW5859)

  • Extreme durability: IRON BLAST TECHNOLOGY strengthens the drill bit.
  • 2 times longer life: Full carbide head in 4 cutter design of drill bits for wood, metal and plastic.
  • Stands up to rebar strikes: Redesigned head geometry of DEWALT drill bits is made to withstand rebar strikes.
  • Wear mark indicator: For accurate diameter of holes.
  • NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831).
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
  • Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock