Categories

Best Hydraulic Rebar Cutter Tools

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • ...his rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy to break. Moreover, it can s....
Check Stock

Happybuy Electric Hydraulic Rebar Cutter, 900W Portable Electric Rebar Cut 5/8' 16mm #5 Rebar within 3 Seconds, 110V

  • ...r machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR 1.5 KW Electric Rebar Bender, 1''(25 mm) Hydraulic Electric Hand Held Rebar Bender, within 5 s, 110 V

  • ...r machine adopts the sturdy machine body and high-intensity hook, which are stronger and not easy to break. It can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste. Multiple screws fixed on the head enforce the stability and sealing..
  • Precision Pressure Relief Valve: This hydraulic rebar bender features a precision pressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • One Button Operation: This electric rebar machine is equipped with an ergonomic back grip design to facilitate maneuverability and ease of use. Simply keeping the switch pressed, the bending block starts to push forward. It is easy to bend rebar even in high air and is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Anbull 900W Electric Rebar Cutter, Cutting up to 5/8 Inch 4-16mm #5 Rebar, with Replaceable Jaw Blades, Cutting Speed 2.5-3.0S (900W RC-16)

  • Cut Up to #6 3/4"(20mm) Grade 60 Rebar and Round Bar.
  • Includes: Cutter, Steel Carry Case, Wrench Set, Hydraulic Oil, User Manual.
Check Stock

KwikSafety (Charlotte, NC) PINZA Ironworker Pliers Spring Loaded Action Side Cutters Steel Rebar Cut Diagonal Wire Cutters Bi-Material Tempered Handles & Aggressive Cross-Hatched Knurl Lineman Pliers

  • PEAK PERFORMANCE - The PINZA Lineman Pliers designed to cut & twist rebar tie wire. Heavy duty wire cutters made from alloy steel (no rust pliers)! Industrial handle tempering absorbs the "snap" when cutting. Features deep knurl channels to provide a strengthened grip power for twisting & pulling. Rebar wire pliers w/ induction hardened knives for easy cuts & longer life. Durable plastic-dipped handles w/ a polymer rubber coat for greater grip & (1) 135° bent handle for added pulling leverage..
  • RELIABLE SIDE CUTTER PLIERS - These linesman pliers feature a spring loaded handle for self-opening & an angled head design for better rebar tying performance. Lightweight rebar pliers (12 oz total weight) w/ an overall length of 9.19in (23.3 cm). Square nose side cutter linemans pliers w/ jaw thickness dimensions of 1.28in (3.3 cm) x 1.156in (2.9 cm) & a knife length of 0.625in (1.6 cm). High leverage design & hot riveted joint ensures a greater cutting tool & gripping power (NO handle wobble)!.
  • UTILITY STEEL PLIERS - The KwikSafety PINZA ironworkers pliers combine secure jaw grip w/ powerful cutting & features more plier cutter power over standard cutting pliers. The perfect cutters pliers for the home, workshop or jobsite! Long "handform" handles & heavy-dut....
Check Stock

Metabo HPT Rebar Bender and Cutter | Electric | Up to #5 Grade 60 Rebar (3/8', 1/2', 5/8') | Variable Speed Trigger | Lightweight and Portable | 5-Year Warranty | VB16Y

  • MOTOR: 8-Amp motor with intense power (530W).
  • TRIGGER: Variable speed trigger with safety lock provides manual-like precision and control over the bending speed.
  • APPLICATIONS: Uniformly bends up to no. 5 (3/8", 1/2", 5/8") grade 60 rebar at a maximum angle of 180 degrees.
  • FAST BENDS: Precision angle bends are preset and completed in just seconds (cut: 3. 1 seconds, bend: 5. 1 seconds) for consistency.
  • PRESET DIAL: With the turn of a pre-set dial, bends can be made in a variety of angles.
  • COMPACT: Extremely low profile design (18. 4" L x 8. 5" H x 9. 1" W), yet extremely stable.
  • LIGHTWEIGHT: Only 42 Lb., makes it portable and maneuverability for ease of use on any jobsite.
  • EASY TO READ MARKINGS: Reference markings on bending plate provide for easy position adjustment.
  • METABO HPT: Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • ...bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • ...bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel and φ99 / 148 Gyre Idler Wheel are stronger and not easy to break. Moreover, it can stand super-hard rebar with strong clamping force, which can help to reduce steel rebar waste..
  • Easy to Operate & Transport: This hydraulic rebar bender comes with the standard foot pedal control switch for your easy hands-free bending. With four handles on the corner for you to transport and operate effortlessly. It is widely used in construction engineering for bending rebar, steel bar, steel rod, screw thread steel, carbon steel, round steel, etc..
Check Stock

Wheeler Rex 491-8 Manual Pipe Cutter

  • Super Hydraulic Pipe Cutter:6"-18" ASA Class 26 and 6"-20" Class 22 Water Main.
  • Wheeler-Rex Hydraulic Cutters are the solution to cutting larger diameter pipe.
  • Like the hand operated "snap" cutters, hydraulic cutters are not rotated around pipe..
  • Their remotely operated hydraulic pumps provide the required power..
  • A minimum clearance is needed to wrap cutter chain around pipe, to engage it in the cutter jaws..
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Electric Pipe Threader Machine (1/2\ - 2\) Threading, Cutter, Deburrer, NPT P50

  • Chain pipe cutter compatible with RIDGID Standard Series pressing tools (CT-400, 320-E, RP 330-B, RP 330-C, or RP 340).
  • Soil pipe cutter completes the cut in seconds without long, unruly lever arms.
  • Eliminates the need to score the pipe unlike most pipe cutters due to the chain design and hydraulic power of the RIDGID press tool with an easy grip and trigger action.
  • Soil pipe cutter with the capacity to cut 1-1/2 inch to 4 inch No Hub and Service Weight Soil Pipe - Sizes are indexed for ID (inner diameter).
  • Includes Press Snap Soil Pipe Cutter, portable case and operator’s manual.
Check Stock

NEWTRY Hydraulic Cable Cutter Hydraulic Rebar Cutter φ25/32” Steel Wire Cutter 60KN Bolt Cutter for Copper Aluminum Cable, Armoured Cable, ACSR, Wire Rope, Steel Strand Wire, Aluminum Wire

  • ▷[HIGH CARBON ALLOY STEEL BLADE]---The Hydraulic Cable Cutter adopt high carbon alloy steel blade, high strength, and is specially used to cut copper aluminum wire and steel core aluminum stranded wire. Hook-type Knife Head is easy to open and close, and can be placed in any position. The blade can be replaced by opening the knife edge. The ASIN of the replacement blade: B07NMS6FQ5..
  • ▷[180°ROTATABLE HEAD & 360°FLEXIBLE USE]---The head of the industrial wire shear scissor can be rotated 180 degrees to facilitate adjustment of the working angle. It can also be operated in 360°, which is especially suitable for use in unfounded places and high-altitude projects..
  • ▷[ERGONOMICALLY DESIGNED INSULATED HANDLE+SAFETY VALVE SWITCH]---The handle of this hydraulic wire cutting tool uses a ring-shaped rubber handle to increase friction and provide a comfortable grip.Tighten (ON) when pressurizing and turn off (OFF) when releasing pressure, which is more safe and convenient..
  • ▷[SHEAR RAGNE & WIDE RANGE OF APPLICAITONS]---This Hand Crimper Tool can be used to cut copper aluminum cable,armoured cable, ACSR, wire rope, steel strand wire, copper wire,aluminum wire, steel rope,etc. But NOT SUITABLE FOR submarine cable, screw-thread rebar, iron chain or aircraf....
Check Stock

LEATHERMAN, Rebar Multitool with Premium Replaceable Wire Cutters and Saw, Stainless Steel with Leather Sheath

  • AN ICON UPDATeD: Inspired by Tim Leatherman's original PST, the Rebar features all-locking tools, 100% stainless steel construction and removable wire/hard-wire cutters.
  • 17 TOOLS IN 1: The Rebar’s bounty of tools include knives, pliers, screwdrivers, wire cutters, an electrical crimper, a wire stripper, bottle and can openers, a file, a saw, an awl and a ruler.
  • OUR GUARANTEE: We’re proud to stand behind every product that leaves our factory in Portland, Oregon.
  • That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts a lifetime.
  • STRONGER DESIGN: The Rebar pliers have been optimized for strength and feature replaceable wire/hard-wire cutters—a first for a 4-inch tool from Leatherman.
  • ALWAYS ON HAND: Compact, lightweight and made for just about any job around the house or job site, your Rebar is always within reach and ready to go.
Check Stock