Categories

Best Hydraulic Steering Ram For Boats

Mophorn 150HP Hydraulic Outboard Steering Kit Boat Marine System

  • 150 HP Hydraulic Steering Kit: The HK4200A-3 hydraulic outboard boat steering kit includes a balanced steering cylinder, a low-friction helm, two lengths of 20ft hose, and a fill kit. It will perfectly replace your aging or broken equipment..
  • Built-in Two-way Lock Cylinder: Output force: 409.7 kgf. The cylinder has a built-in two-way locking valve, which eliminates rebound torque during torsion. The robust barrel design and the sealing system can withstand the harsh environment..
  • Max. 150HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The low friction helm for smooth and comfortable steering. And it has a replaceable shaft seal that can be easily replaced..
  • Cut-to-length Hoses: Our high-strength nylon hose is equipped with quick-fit 1/4'' pipe fitting for easy and fast installation and multiple re-uses. Each hose is 20' long and can be cut for your specific installation, accommodating most boats..
  • Great Partner for Your Boat: Our hydraulic steering kit is for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables — and outboard....
Check Stock

Mophorn Helm Outboard Hydraulic Steering Pump 300 HP Hydraulic Pump HH5271-3 for Cruisers Runabouts Boats

  • Front Mount Pump: This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH. The helm allows you to install all of the reliability and comfort of hydraulic steering onto your boat. Get ready to take your boat to the next level..
  • 1.7 Hydraulic Helm: Our front mount 1.7 hydraulic helm provides smooth and efficient no feedback steering for single and multi-outboard engines up to 300 HP (600 HP combined for counter rotating twins) for speeds up to 60 MPH. 4.9 turns lock-to-lock in most typical single cylinder outboard applications..
  • Shaft Seal & ORB Fitting: The pump has a shaft seal that can be easily replaced, this is a user-friendly design for your use. And the positionable stainless steel O-Ring (ORB) fittings for easy hose routing..
  • Built-in Two-way Lock: The hydraulic helm pump is equipped with the replaceable shaft seal, built-in lock valve, relieve valve, and air pocket. These details make it convenient for you to use..
  • Sturdy Aluminum Alloy: The hydraulic steering helm is made from a high-strength aluminum alloy material, which is corrosion-resistant, and high-density to effectively prevent seawater erosion. Constant seasonal replacements will no longer be....
Check Stock

VEVOR Hydraulic Steering Cylinder 300HP, Hydraulic Steering, Front Mount, Hydraulic Outboard Steering Cylinder for Marine Boat Steering System

  • Max Working Pressure: 10.3Mpa: The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi..
  • Advanced Crush Resistance: State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Easy to Install: This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement..
  • Wide Application: Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock

Winibo ZA0301 Marine Outboard Hydraulic Steering System for Boats with Helm Pump, Hydraulic Cylinder and Tubing

  • Make your boat steer better than new! Helm Mounted Hydraulic Steering systems for Boats.
  • Universally Designed for outboards rated up to 90 total Horsepower!.
  • Compatible with such brands as Yamaha, Suzuki, Honda, Mercury, Nissan, Tohatsu and more!.
  • Our kit is made of high quality stainless steel and Aluminum alloy for years of trouble free use!.
  • 24 Foot of quality Hydraulic hose, Top mounted pump, and a ¾” tapered steering wheel shaft, guarantee a professional installation on most boats!.
Check Stock

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

Dometic SeaStar Pro Hydraulic Steering Kit, HK7500A-3

  • Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
  • Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
  • Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
  • Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
  • Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check Stock

gazechimp Stainless Steel Outboard Steering Link Lever Tie Rod End Set for Marine Boat

  • Built and certified to meet safety & quality requirements established by the American Boat & Yacht Council (ABYC) and International Standards Organization (ISO).
  • Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
  • Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
  • Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
  • Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
  • Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check Stock

Uflex GOTECH 1.0 GoTech 1.0 Hydraulic Outboard Steering Kit

  • For pontoon boats and other boats with moderate torque.
  • Kit Includes: - (1) UC81-OBF cylinder - (1) UP18 helm - (2) Quarts of Oil, 15 SAE - 30' of nylon tubing.
  • Designed to handle 4-stroke outboard engines up to 115HP.
Check Stock

Dometic SeaStar Classic Tilt Hydraulic Steering Kit, HK6400TC-3

  • Hydraulic Steering Kit without hoses (ordered separately ho51xx where xx equals hose length in feet).
  • Updated System includes Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing and NEW End Gland Sealing System for maximum protection from saltwater and compression set.
  • 5 turns lock-to-lock with 1.7 Cubic Inch Displacement Helm (included) for maximum steering comfort.
  • Robust Barrel design and NEW graphics compliment new boats and motor packages..
  • 48 Degrees of Tilt Articulation, 5 Positive Lock Positions and Factory Installed Lubrication ensure Smooth Operation and Feel.
Check Stock

Winibo ZA0350 Marine Hydraulic Outboard Steering Kit for Outboard up to 300HP with Helm Pump Compact Cylinder Tubing Others

  • Outboard Hydraulic Steering Kit Universally Fit Outboards up to 300HP.
  • Single or dual Station Steering For Boats Rated To a Maximum of 600HP (Total).
  • built-in lock valve to prevent the steering load from feeding back, also includes a relief valve provides over-pressure protection.
  • Adjustable O-ring seal fittings simplify the installation process and allow for simple reorientation of the fittings after installation.
  • made in high class stainless steel, aluminum alloy and copper， Kevlar reinforced Tubing.
Check Stock

TIKSCIENCE Bleed Tube with Bridge Tube for Seastar Hydraulic Steering Systems Hydraulic Steering Filler Kit

  • Application - Hydraulic steering filler bleed tube kit fit Seastar hydraulic steering systems.
  • Package Includes: Bleed kits include bridge tube and bottle to tube, used to replenish the steering system fluid of ships, hose with screw cap which....
  • Save Your Money - Hydraulic steering filler kit used to replenish oil for the ship's steering system fluid, entire steering system remains sealed....
  • Simple to Use - Connect the steering fluid bottle to the fitting with the adapter hose and vent the bottle per the instructions on the hose and bottle....
  • Service - Undergoes more stringent testing than aftermarket products, you will get a 90-day shelf life for our store. If you have any questions about....
Check Stock

RITE-HITE New Motor Holder - Stabilizes Outboard Motors with Two Trim Cylinders and Newly Added Allen Wrench

  • NEW DESIGN! Cut out is designed for Mercury and Yamaha CMS 4-stroke. Fits most motors as long as there are 2 TRIM CYLINDERS.
  • Comes with Two Red Hydraulic Steering Stabilizers Included for Trailering and an Allen Wrench.
  • There are some boats that will sit to low to the ground while being trailered, resulting in not being long enough with this product in use. It is unclear as to if there are certain brands of boats or certain lengths that cause this. If this becomes an issue for you, we can make longer extensions that could help this issue. If there are any questions please contact us..
  • Made From High Impact Plastic with Soft Rubber Top.
Check Stock

Hydrodrive MF75W Outboard Hydraulic Steering System till 75 HP

  • Hydrodrive Outboard Hydraulic steering System up to 75 HP.
  • Output Force: 220 kg, Torque: 46 Kgf, Max speed: 30 kts, Turns: 4,4.
  • Hydraulic pump made from full block aluminium.
  • Hydraulic Cylinder made from cold, drawn hardened aluminium.
  • Choose the best Hydraulic Steering System for your boat.
Check Stock