Categories

Best Hydraulic System Leak Repair Products

K&W 402033X6 Trans-X Automatic Transmission Stop Leak & Tune-Up - 32 Fl Oz Leak Repair Solution for Automotive, Power Steering, Hydraulic Systems | Car Care Fluids

  • K&W SEALANTS & SOLUTIONS: From head gaskets and engine blocks to automatic transmissions and power steering, K&W products are made to stop leakage in aging vehicles. Our sealants provide an effective alternative to costly repairs and parts replacements..
  • TRANS-X STOP LEAK & TUNE-UP: Our formula prevents leaks caused by aged seals & gaskets place. Powerful cleaning agents remove sludge, gums, & varnish that helps to prevent premature failure and extends transmission life..
  • APPLICATION RANGE: Trans-X is formulated to repair leaks in automatic transmissions, power steering, & hydraulic systems, and can be used as preventative maintenance when added to transmission fluid. This solution is not compatible with CVT or manual transmissions..
  • SAFE HANDLING: Highly flammable leak repair solution must be stored in a well-ventilated place away from direct heat. Wear appropriate personal protective equipment such as safety glasses and gloves..
  • PRODUCT SPECIFICATIONS: Trans-X Stop Leak & Tune-Up Solution is available with 32 fl oz. fill..
Check Stock

Honey Well Genuine 8oz R1234YF Refrigerant (3 Freon Cans) & HD Brass Can Tap with Gauge

  • R134a KIT - Kit contains (2) 18oz cans of R134a refrigerant with stop leak and a reusable can tap with gauge. A total of 36oz of R134a is enough to recharge almost every vehicle, just 18oz is not enough if you have a completely empty system..
  • STOP LEAK - The stop leak in this kit is good for sealing leaks in rubber components such as o-rings. This is a basic stop leak and can not repair more severe leaks. Products like ZeroR Max Seal are much stronger and can even repair leaks in metal components..
  • CAN TAP & GAUGE - Reusable can tap and gauge for similar EZ Chill products. Note, this is NOT a universal can tap and can not work on common R134a threaded products. For a truely universal can tap check out the ZeroR brand of tools and refrigerants..
  • INSTRUCTIONS - Steps on product should be followed closely. With vehicle running and AC set to Max Cool, connect can to low side service port. Dispense refrigerant into system in short bursts, checking the gauge in between dispensing for proper charging levels..
  • LEGAL - Complies with Section 612 of the EPA Clean Air Act, EPA Compliant in Self Sealing Cans. R134a Refrigerant for MVAC use in 18oz self sealing valve cans..
Check Stock

Mastercool Blue 71500-A Hydra-Krimp AC Hose Crimper,Black

  • ACCEPT NO IMITATIONS, Mastercool’s US designed A/C crimper has been the standard for over 25 years.
  • IDEAL FOR SHOP AND FIELD APPLICATIONS, the mobility of the 71500 allows the technician to work directly to repair or fabricate a/c hoses on the....
  • HYDRAULIC BODY CREATES OVER 10,000 PSI OF PRESSURE allowing technicians to recrimp existing hose assemblies that might have a leak.
  • MASTERCOOL’S DIES ALLOW FOR AN OE DESIGN 6 SEGMENTED CRIMP to ensure no leaks.
  • EASY TO USE HYDRAULIC HAND-HELD PUMP crimps the hose fitting in under 10 pumps.
Check Stock

228 Buna-N O-Ring, 50A Durometer, Round, Black, 2-1/4\ ID, 2-1/2\ OD, 1/8\ Width (Pack of 10)

  • O-RING ASSORTMENT KIT: NEIKO introduces our Rubber O-Ring Assortment Set. Each O-ring acts as a joint gasket to seal and protect water lines in any oil line, faucet, sink, filter, toilet, or other machinery..
  • VERSATILE & RELIABLE: Thanks to the NBR construction, these O-rings are resistant to water, UV, lubricants, hydraulic fluids, gasoline, alkalis, and grease. Each O-ring creates a long-lasting seal system that protects your devices from leaks..
  • DURABLE O-RING KIT: Each O-ring in this 270-piece set is built for long-lasting use with static and dynamic motion cylinder fittings. The rings are made of commercial-grade nitrile butadiene rubber for liquid resistance..
  • COMPACT SIZE: Our O-ring kit comes organized in a case by ring size and shape. Carry this seal tool set with you wherever you’ve got a leak that needs extra sealing protection, and be ready to repair against water leaks and other liquids..
  • WHAT’S INCLUDED: This rubber O-ring set includes 18 common small and large SAE and metric sizes for a range of home, hydraulic, industrial, and pneumatic applications. A sturdy plastic case is included..
Check Stock

OTC HDJ5P Air / Hydraulic Service Jack - 5 Ton

  • Heavy duty hydraulic performance for garages, equipment dealers, commercial service and more.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram for additional rust resistance, wiper seals protect hydraulic system from contaminants and convenient foot pedal for no load lifts.
  • Front wheels with roller bearings and ball bearing - mounted rear caster wheels provide stability and easy maneuverabilty.
  • Overload and by-pass safety valves prevent use beyond the jacks rated capacity and over extension of the ram.
Check Stock

Testing Coupling Adapter, G1/4 to M16*2 Thread Pressure Test Point Testing Coupling Adapter for Hydraulic System Test Point Adapter

  • ★★★【Widely Applicable】- This series of products are widely used in hydraulic system pressure detection, lubrication, exhaust, pressure system oil sampling..
  • ★★★【Long Service Life】- This test adapter is made of high quality carbon steel and stainless steel material, sealing by good sealant, with long serving life..
  • ★★★【High Quality】- It can withstand high pressure, and great temperature resistance..
  • ★★★【Excelent Performance】- Advanced structure, reliable sealing, no oil leak..
  • ★★★【Portable】- Small size, light weight, easy to use..
Check Stock

The Terminator

  • Hydraulic bottle jack designed for residential and commercial use.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
  • Features a lifting range of 11" to 17-3/4" with a 50 ton (100,000 lb) capacity.
  • Engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance.
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits.
  • Meets ASME PASE safety standards and includes a limited 1 year manufacturer warranty.
Check Stock

STP High Mileage Car Care Kit 4-Piece Car Care Products

  • One 4-Piece STP High Mileage Car Care Kit for Engine and Fuel Systems.
  • Car care products improve the fuel system and engine in high-mileage vehicles.
  • STP Super Concentrated High Mileage Engine Flush engine cleaner preps the engine for new oil by cleaning sludge and varnish.
  • STP High Mileage Engine Oil Treatment + Stop Leak reduces friction and rejuvenates seals and gaskets.
  • STP High Mileage Transmission Stop Slip + Leak Repair stabilizes transmission fluid and protects transmission seals.
Check Stock

QLOUNI 80Pcs 7-21mm 304 Stainless Steel Single Ear Stepless Hose Clamps with Clamp Crimper Tool Kit,For Water Pipe, Plumbing, Automotive and Mechanical Application

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping performance, offering 10 Tons compressive force, more labor-saving, and crimping pipes in seconds..
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This hydraulic copper tube fittings crimper meets your various demand fast for pipe maintenance and repair..
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an integral hydraulic pipe crimping tool with a standard manual hydraulic pump..
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic pipe tube crimping tool will release pressure automatically when reaching the max pressure..
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied in electric power, traffic, petroleum, chemical engineering, mining, metallurgy, and shipbuilding areas..
Check Stock

Reaper's Stand (Reapers Motorcycle Club Book 4)

  • CONVENIENT MOTORCYCLE REPAIR: This hydraulic ramp saves both time and effort during motorcycle repair and maintenance. By loading and lifting the motorcycle up to eye level or higher, you can make delicate repairs to your bike without having to crane your neck while doing so..
  • PNEUMATIC LIFT TABLE: This hydraulic motorcycle lift table has a dual pedal system and a drop panel approach to allow for ease when getting your bike onto the ramp. It also has a front-wheel clamp with a safety locking bar and rear drop panel for added safety and security..
  • SAFETY AND SECURITY: These ramps have a diamond-plate surface to prevent slipping and sliding. They also have strap access ports so you can secure the bike to the ramp as you work on it. These safety allowances make it easy to protect yourself as you work on motorcycles, either in a pro mechanical shop setting or in your home garage..
  • DURABLE CONSTRUCTION: The hydraulic ramp has a 1,000-pound weight capacity, so you can easily lift your bike. With its sturdy 11-gauge steel construction and high weight capacity, you can lift any bike for servicing with confidence and ease..
Check Stock

DOUBLE CHEN Copper Tube Fittings Hydraulic Pipe Crimping Tool with 1/2',3/4' and 1' Jaw Copper Pipe Propress Crimper Pressing Pliers,Along with Pipe Cutter

  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

DASBET 18PCS Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Set with Hand Pump and Nylon Adapters

  • ....5bar), easy to observe. Chrome plated brass quick coupler with relief valve, can be connected to radiator adapters easily and quickly..
  • Leak Detection Tool: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly, avoid leak result in the reduction of coolant and boiling point, cause high engine temperature, low oil viscosity and other serious problem.
  • Easy To Use: Remove the original radiator cap, choose an available radiator cap from the test kit and install it on radiator opening. Work the handpump till the pressure up to 10-15psi (Avoid up to 35psi). Check the gauge reading, if the reading drops automatically, it means that the leakage might occur in radiator. Please inspect the radiator system and repair it if necessary. Normally, it takes around 10mins to test leak, very easy and fast to operate..
  • Wide Application: Coolant system leak c....
Check Stock

Hapco Products - Hydraulic Oil – 32 oz.

  • Specs: Description: Hydraulic Oil and Stop Leak, Adds life to pumps, rams and seals, Adds lubricity and thermal stability to any hydraulic oil, Automatic transmissions: use approx. 10% to stop slip, leaks, rough shifting and over-heating.
  • up to 30% in worn units, Construction equipment: use approx. 5%-10% for preventative maintenance.
  • up to 20% to correct heat, leaks and fading in older equipment, Hydrostatic drives: use approx. 10% for more hydraulic pressure and less gear wear.
  • Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order..
  • Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging..
Check Stock