Categories

Best Hydraulic Throttle Check Valves

Bennett V351HPU1 Hydraulic Power Unit - 12 Volt

  • Compact powerhouse that creates hydraulic pressure to lower and raise the trim tabs.
  • Employs two solenoid valves to direct the flow of fluid to the actuators.
  • Solenoid valves lock tightly to secure the tabs in place.
  • Lexan cover protects electrohydraulic unit from occasional wash down and translucent reservoir allows fluid check at a glance.
Check Stock

EVIL ENERGY 4891735AC Electronic Throttle Body Assembly with Mounting Gasket Compatible with Jeep Compass Patriot Chrysler Sebring Dodge Caliber Journey 2.0L 2.4L 2007-2017

  • ...ng ,make sure this is the right part you need.
  • Fitment/Compatibility: Compatible with 2011-2014 Chrysler 200 2.4L, 2007-2010 Chrysler Sebring 2.4L, 2008-2014 Dodge Avenger 2.4L, 2007-2012 Dodge Caliber, 2009-2017 Dodge Journey 2.4L, 2007-2017 Jeep Compass 2.0L & 2.4L, 2007-2017 Jeep Patriot 2.0L & 2.4L.
  • Function: The throttle body controlled the air that flows into your vehicle's fuel injected engine, it performs when the gas pedal is pushed and the throttle body plate actually opens up so that more air can be released into the manifold. The throttle body assembly has valves, which are adjustable in order to control the amount of airflow. The throttle body is important in the fact that it keeps your vehicle running efficiently.
  • Signs of a Bad Throttle Body: If you are experiencing engine stalling, failing to start, electronicthrottle body warning light came on, hesitation or power surging on acceleration on your vehicle then you may have a problem with your vehicle's throttle body If you experience any of these symptoms in your vehicle, you should visit your local mechanic for a more comprehensive diagnosis. Spotting a faulty throttle is a bit harder than most mechanical issues.
  • We value your shopping experience and strive to offer a high-quality product....
Check Stock

International Door Closer Model 230S with

  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • With Standard Medium spring tension. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

International Door Closers Model 230A with

  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • Standard Medium spring tension. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

International Door Closers 231-S with

  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • Standard Medium Spring Tension. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

DOLUNTO Check Valves STU Throttle Valve Hydraulic Check Valve G1/4 3/8 1/2 3/4 1 Inch Carbon Steel Industry Engineer Parts Specification 1/4Inch

  • Temperature of Media: Normal Temperature.
Check Stock

International Door Closers Model 212 BODY ONLY Fixed ADA (Handicap) with 8.5lb. spring tension Overhead Concealed Closer for Exterior Doors - 90 Degree Backstop with Hold-Open function for Center Hung Doors

  • 90 Degree Backstop with (HO) Hold Open - ADA 8.5lb opening force - Exterior Door.
  • Suitable for Exterior Doors from (36" to 48" x 96") - Two Speed Control Valves.
  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • ADA (Handicap) 8.5lb opening force. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

International Door Closers Model 201 BODY ONLY Fixed ADA (Handicap) with 5lb spring tension Overhead Concealed Closer for Interior Doors - 105 Degree Backstop with No Hold-Open function for Center Hung Doors

  • 105 Degree Backstop (NHO) No Hold Open - ADA (Handicap) 5lb. opening force - Interior Door.
  • Suitable for Interior Doors from (36" to 48" x 96") - Two Speed Control Valves.
  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • ADA (Handicap) 5lb. opening force. For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

International Door Closers Model 211 BODY ONLY Fixed ADA (Handicap) with 8.5lb apring tension Overhead Concealed Closer for Exterior Doors - 105 Degree Backstop with No Hold-Open function for Center Hung Doors

  • 105 Degree Backstop (NHO) No Hold Open - ADA 8.5lb opening force - Exterior Door.
  • Suitable for Exterior Doors from (36" to 48" x 96") - Two Speed Control Valves.
  • Closing and Latching speeds controlled by separate regulating valves fully adjustable after instal.
  • ADA (Handicap) 8.5lb opening force - For use on center pivoted installations - UL Listed.
  • Stable hydraulic door check fluid for any climatic operation and constant lubrication.
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

CRC 05110-12PK Mass Air Flow Sensor Cleaner 11 fl oz 12 Pack

  • The first product specifically developed to clean mass air flow sensors.
  • Increases horsepower & improves air/fuel ratio and MPG.
  • Cleans gum & varnish from the throttle valves & throttle body for easier starting.
  • Application: Mass air flow sensors & housing and fuel injected gasoline engines (both throttle body & multi-port).
Check Stock

FibroPool 1 1/2\ POSI- Close Non- Lube Check Valve

  • Medical grade PVDF material, safe and nontoxic.
  • Normal performance under -30 ℃ to 150 ℃, excellent chemical and hydrolysis resistance, outstanding ozone, UV and weather resistance..
  • Size Reference:These Check valves measures approx. 4 mm in diameter and 38 mm/ 1.41 inches in full length, please make sure of our size when you buy it..
  • Perfect for the hydraulic system to prevent reverse flow of material, or compressed air for pneumatic system to prevent.
  • Flow smoothly, small fluid resistance, good sealing performance, short spool stroke, small off valve impact force, attractive appearance and high reliability..
Check Stock

Neiko 50463A Grease Fitting Assortment | 110 Piece | SAE | Straight and Angled Zerk Kit | A3 Steel | for Angled Grease Guns, Bearing Housings, Mechanical Component Lubrication

  • [APPLICATION]: Grease fittings, sometimes known as Zerks or grease nipples, are small hydraulic check valves used on bearings and similar mechanical assemblies to supply lubricant to internal working parts..
  • [HYDRAULIC GREASING]: These grease zerks feed lubricant into a bearing instead of having to disassemble parts to apply the lubricant, which makes for effective work efficiency when using a grease gun..
  • [COMPATIBILITY]: This assortment kit is perfect for use on cars or vehicles and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings to allow a pressure-resistant connection..
  • [CONVENIENT]: The plastic storage case contains each SAE grease zerk fitting in the kit in different compartments with an organization chart to neatly stay organized in your tool collection..
  • [INCLUDES]: Sizes - 30 straight 1/4-28, 20 straight 1/8" pipe grease, 15 45-degree, 1/4-28 and 15 90-degree 1/4-28 for angled grease guns and more..
Check Stock