Categories

Best Hydraulic Winch 15000

Rough Country Winch Hook Mount | Hawse Fairlead - RS140

  • The hawse fairlead is made of high quality billet aluminum.
  • The package includes necessary mounting hardwares screws and nuts for most bumpers.
  • This winch fairlead can prevent the synthetic rope from binding up and then to reduce synthetic rope damages, to prolong the life of synthetic ATV and UTV winch ropes.
  • Compatible with most winches (load capacity: 8000lbs to 15000lbs).
  • The rounded smooth edge on the fairlead front can make the rope run through smoothly when use this aluminum hawse fairlead with synthetic winch ropes..
Check Stock

ZEAK Cradle Winch Recovery Mounting Plate, 10'' × 4-1/2‘’ Universal fit Winch Mounting Plate, 15000 lb. Capacity

  • ZEAK cradle winch mounting plate own an Anti-rust powder coat finish,a durable black powder coating, which can be guaranteed not to rust easily and easy to clean..
  • Suitable for trucks, trailers and any other 4WD vehicles..
  • Standard 10’’x4-1/2’’ winch mount pattern,it’s easy for everyone to install this cradle winch.
  • The Zeak cradle winch mounting made of heavy duty steel ,durable construction.It is suitable for 8000lb to 15000lb winches,be tailor for 4WD competiton.
  • ZEAK products provide lifetime technical support.If you have any problem please contact us at any time..
Check Stock

10' Billet Aluminum Hawse Fairlead for Synthetic Winch 8000-15000 LBs Rope Cable Lead Guide

  • - Comparing with standard style roller fairlead, this winch fairlead prevents the synthetic rope from binding up, as you know, winch rope is expensive, we need to reduce damages.
  • - Compatible with most winches (load capacity: 8000lbs to 15000lbs).
  • -- Use this Aluminum hawse fairlead with Synthetic winch ropes, the rounded smooth edge on the fairlead front allows the rope to run smoothly through..
Check Stock

WARN 74756 Winch Motor

  • For the following WARN Winch Models: Some early XD9000i models, M12, M12000, M15, M15000.
  • Replaces the following WARN motor numbers: 26626, 26629, 38894, 61545, 77505.
Check Stock

KIMISS Hawse Style Winch Fairlead, Car Hawse Winches Fairlead 10in/25.4cm Load 8000 to 15000 Pounds Black Replacement Automobile Components, Black

  • Wide Application --------- Wide application range, can be installed on winches with load capacity of 8000-15000 lbs. To ensure trouble-free performance, vehicle commissioning tests have been carried out. It can be used for a long time in off-road expeditions, is not easy to be damaged, and does not need to be replaced frequently..
  • Reduce Damage To The Synthetic Rope --------- Standard 10-inch screw installation method. Reduce adhesion and friction caused by tilting tension. The rounded edge design makes the synthetic rope cross smoothly, reduces the damage of the synthetic rope, and prolongs the service life of the synthetic winch rope..
  • Excellent Performance -------- Prevent excessive wear of the synthetic rope and prevent heat transfer to the winch rope. Used with steel wire rope or synthetic rope, it helps to wind the wire and protect the cable from being pinched..
  • Synthetic Winch Rope --------- The aluminum cable fairlead is specially designed for use with synthetic winch rope to prevent heat from being transferred to the winch rope and reduce the possibility of rope wear and entanglement..
  • Improve The Working Efficiency Of The Winch Fairlead --------- The winch fairlead can prevent the winch synthetic rope from tangling during use, improve the ....
Check Stock

PLIOSAUR 500A 12V Winch Solenoid Relay for 8000-15000lb ATV UT Trucks Winches Replacement

  • Compatible with 8000lb-15000lb winch with DC 12V (series wound and permanent magnet).
  • The 4 Ternminal is sliver plating, and this one is big size winch.
  • Come with shatterproof sealed and corrosion resistant case.
  • Life Expectancy Electrical: 10,000 times Operations.
  • 【Warranty Service】100% quality OEM match, direct replacement, one year warranty.
Check Stock

YaeKoo 10 Billet Polished Aluminum Hawse Fairlead Load Capacity 8000-15000 LBs with Mounting Hardware for Synthetic Winch Rope Black 10

  • The hawse fairlead is made of high quality billet aluminum.
  • The package includes necessary mounting hardwares screws and nuts for most bumpers.
  • This winch fairlead can prevent the synthetic rope from binding up and then to reduce synthetic rope damages, to prolong the life of synthetic ATV and UTV winch ropes.
  • Compatible with most winches (load capacity: 8000lbs to 15000lbs).
  • The rounded smooth edge on the fairlead front can make the rope run through smoothly when use this aluminum hawse fairlead with synthetic winch ropes..
Check Stock

Winch Hitch Cradle Mount Plate, DACK Universal Receiver 10 x 4 1/2 Winch Mounting with 2''Receiver Hitch for Recovery Winches Heavy-Duty 15000Lbs Capacity for ATV UTV Truck

  • 【Heavy Duty Steel Construction】The load-bearing plate of DACK Winch Hitch Cradle Mount Plate is made of 5mm thick cold-rolled plate, and has a high-density, durable black powder coating to ensure that it will not rust when placed outdoors for a long time..
  • 【15000Lbs Large Capacity】This winch hitch mount weighing up to 5kg, easily tow your vehicle and ensure absolute safety..
  • 【Universal Winch Mount】Pre-drilled winch mount fits most winches, Package includes hitch pin and clip, as well as 10" on center fairlead bolt pattern and 10" x 4 1/2" standard winch mount pattern ensure the installation is more convenient..
  • 【Suitable for Most Vehicles】: The standard universal size ensures that the mounting plate is suitable for any four-wheel drive vehicle: truck, ATV, 4x4, trailer, etc. Suitable for standard 2 inch receiver..
  • 【WORRY-FREE VOUCHSAFING】DACK Winch Hitch Cradle Mount comes with Lifetime support and the hardware is rigorously tested before shipment. If you have any questions about the product installation, please feel free to contact us and we will....
Check Stock

Magister Hydraulics Double Acting Hydraulic Cylinder - Tang Universal Hydraulic Cylinder 1.5\ Bore, 6 inch Stroke Tang Style (1.5x6)

  • 【Price Advantage】-This dump trailer pump has lower price and higher quality,average 20$ lower than market price..
  • 【Relief Setting】-Up to 3200 PSI Max. Relief Setting For Increased Lifting Power on A port..
  • 【Hydraulic Oil】- The fluid choice of the hydraulic power unit should choose suitable antiwear hydraulic oil according to the operating environment/temperature..
  • 【Double Acting】-This hydraulic pump is suitable for horizontal mount.
  • About 15 Foot ( 4.5m) Removal Cord And Start Solenoid..
  • 【Customer Service】-The 12V hydraulic pump is widely used in small dump truck,dump trailers, hydraulic winch, etc and offer installational and use professional technical support..
Check Stock

12V Winch Solenoid Relay Contactor & Winch Rocker Thumb Switch Combo with Handlebar Control Kit Compatible with ATV UTV 1500lb-5000lb Polaris 800 1000

  • COMPATIBLE WITH - All winch solenoid 12v: 4x4 vehicles, ATV's, UTV's, SUV's, Jeep's, and most brands of recovery winches | Others like 12 Volt Trailer, hydraulic pump, lift jack etc..
  • OEM REFERENCE - 63070, 62135, 74900, 2875714, 70715 | Voltage: 12V, Power: 250A | Replacement Contactor for Polaris, KFI, WARN, RAMSEY, HONDA, SUPERWINCH, MILE MARKER, MASTER LOCK, CYCLE COUNTRY, CHAMPION, SMITTYBILT etc. Models, work with most brands of ATV/UTV warn winch solenoid | Please see the detailed fitment below..
  • UPDATED VERSION ACCESSORIES - Easy installation, The atv winch switch kit fixed parts of the new version of the product have been assembled, no need for the buyer to assemble it again, just install the winch switch rocker atv according to the instructions..
  • QUALITY ASSURANCE - Made of solid and weather resistant steel and powder coated black surface for great durability, exceeding original OE standard | 100% test before shipping. Direct Replacement for 12V 250 AMP ATV Winch Solenoid Relay Contactor and Switch | Comes with detailed instructions for easy installation. Great choice to replace the broken....
Check Stock

8 Quart DC 12V Hydraulic Pump Power Supply Unit Pack Double Acting Dump Trailer Fit for Lift Unloading

  • Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
  • Double Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
  • Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Double-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
  • Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..
Check Stock

Mophorn 6 Quart Hydraulic Pump Hydraulic Power Unit (Plastic, 6 Quart/Double Action)

  • 6 Quart Translucent Reservoir, Double acting power-up / power-down.
  • 3200 PSI Max. relief setting for increased lifting power on A port (SAE #6).
  • 1500 PS Max. relief setting on B port (SAE #6).
  • Hand-held remote pendant with 15-foot removal cord and start solenoid.
  • Perfect replacement pump for 12VDC remotely controlled dump trialers, liftgates, small dump truck, hydraulic winch and other hydraulic systems.
Check Stock

Triumilynn 12V 250A Winch Solenoid Relay Contactor Thumb Truck for ATV UTV Boat Vehicle Industry Winch 1500-5000lbs, Replace Warn # 63070 62135 74900 70715 2875714

  • ✔Replace Part Number : 2875714 / 63070 / 62135 / 74900 /70715.
  • ✔Fitment : for winch motors, snow plows and spreader motors, winches, hydraulic pump motors and other reversible motors.
  • ✔Package & Specification : 1 x Warn Winch Solenoid.
  • ✔Feature: The reversing solenoid switch adopts advanced technique and fine workmanship, which having the characteristics of stable characteristics and high reliability.
  • ✔Fast Delivery: Arrival within 2-4 business days, save time for your important task.
Check Stock